Hello With Moeicenowy's agreement, I have take leadership ot this patchset. There are no really changes appart renaming struct quirck to variant. Since the last serie is really old, I will answer comment here. The two regulator (1.2 and 2.5V) are not for the PHY since: - nothing in the schematic said that they are for the PHY, they seems only for controller - all other AHCI driver use 5V for the target/PHY (vs 1.2/2.5 which cannot be used for target) Furthermore, the AHCI binding support only one regulator per PHY, so using the "target" regulator is out of question for registring this two non-phy regulator. I hope this answer all comments done on last version. Regards Corentin Labbe (3): ata: ahci_sunxi: add support for R40 SATA controller ARM: dts: sun8i: r40: add sata node ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI Icenowy Zheng (1): dt-bindings: add binding for Allwinner R40 SATA AHCI controller .../devicetree/bindings/ata/ahci-platform.txt | 1 - .../bindings/ata/allwinner,sun4i-a10-ahci.txt | 40 +++++++ arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 18 +++ arch/arm/boot/dts/sun8i-r40.dtsi | 9 ++ drivers/ata/ahci_sunxi.c | 124 ++++++++++++++++++++- 5 files changed, 188 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt -- 2.16.4 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
