Re: [PATCH] ata: sata_rcar: exclude setting of PHY registers in Gen3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

> Please try without that step, or do "echo none > /sys/power/pm_test".

Did this now with a q'n'd hacked gpio driver (see below). Worked like a
charm. So, the sata_rcar patch under discussion here seems to be fine.
We only need the GPIO resume on specific boards. This is a seperate
task. D'accord?

Thanks,

   Wolfram

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 023a32cfac42..17ab27ca0187 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -914,6 +914,7 @@ static int pca953x_probe(struct i2c_client *client,
 			dev_warn(&client->dev, "setup failed, %d\n", ret);
 	}
 
+	dev_set_drvdata(&client->dev, chip);
 	i2c_set_clientdata(client, chip);
 	return 0;
 
@@ -986,11 +987,27 @@ static const struct of_device_id pca953x_dt_ids[] = {
 
 MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
 
+static int pca953x_resume(struct device *dev)
+{
+	struct pca953x_chip *chip = dev_get_drvdata(dev);
+
+	pca953x_write_regs(chip, chip->regs->output, chip->reg_output);
+
+	pca953x_write_regs(chip, chip->regs->direction,
+				chip->reg_direction);
+	return 0;
+}
+
+static const struct dev_pm_ops pca953x_dev_pm_ops = {
+	.resume = pca953x_resume,
+};
+
 static struct i2c_driver pca953x_driver = {
 	.driver = {
 		.name	= "pca953x",
 		.of_match_table = pca953x_dt_ids,
 		.acpi_match_table = ACPI_PTR(pca953x_acpi_ids),
+		.pm	= &pca953x_dev_pm_ops,
 	},
 	.probe		= pca953x_probe,
 	.remove		= pca953x_remove,

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux