On 09/20/2018 12:16 PM, Florian Fainelli wrote: > Hi Kishon, Tejun, > > This patch series adds support for the SATA AHCI and PHY found on the > ARM-basd BCM63138 DSL SoCs. > > It would probably make sense for patches 1-3 to go through Kishon's > tree, patches 4-7 through Tejun's tree, and I would be merging the last > two patches through the Broadcom ARM-SoC tree. > > Let me know if this is not a workable plan, thank you very much! Looks like I had left patches with the incorrect subject, please disregard the following patches: [PATCH 2/9] phy: broadcom: allow PHY_BRCM_SATA driver to be built for DSL SoCs [PATCH 5/9] ata: sata_brcmstb: Allow optional reset controller to be used [PATCH 6/9] ata: ahci_brcmstb: Match 63138 compatible strings since they have incorrect/inconsistent titles, the other patches are fine though. Sorry about that. > > Florian Fainelli (9): > dt-bindings: phy: Document BCM63138 compatible string > phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs > phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence > dt-bindings: ata: Document BCM63138 compatible string > ata: ahci_brcm: Allow optional reset controller to be used > ata: ahci_brcm: Match BCM63138 compatible strings > ata: ahci_brcm: Allow using driver or DSL SoCs > ARM: dts: BCM63xx: enable SATA PHY and AHCI controller > ARM: bcm63138: Enable SATA AHCI and PHY > > .../bindings/ata/brcm,sata-brcm.txt | 1 + > .../devicetree/bindings/phy/brcm-sata-phy.txt | 1 + > arch/arm/boot/dts/bcm63138.dtsi | 30 ++++++++ > arch/arm/boot/dts/bcm963138dvt.dts | 8 +++ > drivers/ata/Kconfig | 3 +- > drivers/ata/ahci_brcm.c | 10 +++ > drivers/phy/broadcom/Kconfig | 3 +- > drivers/phy/broadcom/phy-brcm-sata.c | 70 +++++++++++++++++++ > 8 files changed, 124 insertions(+), 2 deletions(-) > -- Florian
