[Prev Page][Next Page]
- [PATCH] Fix GM965 TV out regression
- From: rglowery at exemail.com.au (Robert Lowery)
- IVB GPU turbo
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: unlock mutex before intel_modeset_init_hw
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: unlock mutex before intel_modeset_init_hw
- From: przanoni at gmail.com (Paulo Zanoni)
- mesa compile error
- From: bertrand.c.kong at intel.com (Kong, Bertrand C)
- [PATCH] drm/i915: consolidate interrupt naming scheme
- From: ben at bwidawsk.net (Ben Widawsky)
- IVB GPU turbo
- From: joebloggsian at gmail.com (Joe Bloggsian)
- Specific resolution without monitor
- From: info at vtnd.de (Oliver Seitz)
- Specific resolution without monitor
- From: cahunter at cbnco.com (Carl Hunter)
- Specific resolution without monitor
- From: info at vtnd.de (Oliver Seitz)
- Specific resolution without monitor
- From: cahunter at cbnco.com (Carl Hunter)
- [PATCH] drm/i915: clarify semaphore-ring interaction
- From: chris at chris-wilson.co.uk (Chris Wilson)
- Specific resolution without monitor
- From: fungi at yuggoth.org (The Fungi)
- Specific resolution without monitor
- From: info at vtnd.de (Oliver Seitz)
- [PATCH] drm/i915: clarify semaphore-ring interaction
- From: ben at bwidawsk.net (Ben Widawsky)
- [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error
- From: yuanjingjie at ict.ac.cn (袁竞杰)
- [Q77 express][x86_64][DRI][DRM/intel]Xorg loads "intel_drv.so"error
- From: yuanjingjie at ict.ac.cn (袁竞杰)
- Specific resolution without monitor
- From: cahunter at cbnco.com (Carl Hunter)
- OpenGL sampler objects on sandybridge with Ubuntu Linux 12.04
- From: Mark.Newiger at seefront.com (Mark Newiger)
- mesa compile error
- From: eugeni at dodonov.net (Eugeni Dodonov)
- mesa compile error
- From: bertrand.c.kong at intel.com (Kong, Bertrand C)
- [PATCH] drm/i915: Replace pin count BUG_ON with warning
- From: seanpaul at chromium.org (Sean Paul)
- [PATCH] drm/i915: Replace pin count BUG_ON with warning
- From: seanpaul at chromium.org (Sean Paul)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: ajax at redhat.com (Adam Jackson)
- Question (about setting brightness and contrast)
- From: info at vtnd.de (Oliver Seitz)
- Question (about setting brightness and contrast)
- From: info at vtnd.de (Oliver Seitz)
- [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?
- From: yuanjingjie at ict.ac.cn (袁竞杰)
- Question
- From: francisco.cardoso at gmail.com (Francisco Manuel Cardoso)
- Cedarview issue
- From: eugeni at dodonov.net (Eugeni Dodonov)
- Cedarview issue
- From: dmitri.toubelis at alkeron.com (Dmitri Toubelis)
- [PATCH 2/2] drm/i915: implement hsw_write_infoframe
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 2/2] drm/i915: implement hsw_write_infoframe
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/2] drm/i915: small hdmi coding style cleanups
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 1/2] drm/i915: i915.enable_backlight=0 disables intel_backlight
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: ajax at redhat.com (Adam Jackson)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?
- From: yuanjingjie at ict.ac.cn (袁竞杰)
- [PATCH] drm/i915: don't return -ENXIO from gmbus xfer
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: don't clobber the pipe param in sanitize_modesetting
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Convert BUG_ON(!pll->active) and friends to a WARN
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: disable gmbus on i830
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: disable gmbus on i830
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Convert BUG_ON(!pll->active) to a WARN
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/3] drm/i915: Introduce for_each_ring() macro
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: implement hsw_write_infoframe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: disable gmbus on i830
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: Enable the PCH PLL for all generations after link training
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Convert BUG_ON(!pll->active) to a WARN
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion
- From: pross at xvid.org (Peter Ross)
- [PATCH 2/2] drm/i915: properly implement doubleclocked hdmi modes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: properly implement doubleclocked hdmi modes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/edid: adjust double-clocked cea modes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/4 v6] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: properly handle interlaced bit for sdvo dtd conversion
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: fixup infoframe support for sdvo
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it
- From: daniel at ffwll.ch (Daniel Vetter)
- Cedarview issue
- From: dmitri.toubelis at alkeron.com (Dmitri Toubelis)
- [PATCH 1/4 v4] drm/i915: timeout parameter for seqno wait
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 3/4 v6] drm/i915: wait render timeout ioctl
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 2/2] drm/i915: small hdmi coding style cleanups
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 1/2] drm/i915: implement hsw_write_infoframe
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH] tests/wait render timeout test
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] intel: add a timed wait function
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/4] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/4 v6] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/4 v3] drm/i915: improve i915_wait_request_begin trace
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/4 v4] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/3] drm/i915: Check whether the ring is initialised prior to dispatch
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/2] drm/i915: small hdmi coding style cleanups
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/2] drm/i915: implement hsw_write_infoframe
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/3] drm/i915: Introduce for_each_ring() macro
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 5/5] drm/i915/dp: For consistency use the DP hotplug synonyms
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/5] drm/i915/hdmi: Query the live connector status bit for G4x
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/5] drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/5] drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/5] drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/3] drm/i915: Replace the feature tests for BLT/BSD with ring init checks
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/3] drm/i915: Check whether the ring is initialised prior to dispatch
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] drm/i915: Introduce for_each_ring() macro
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: chris at chris-wilson.co.uk (Chris Wilson)
- OT: Video tearing
- From: info at vtnd.de (Oliver Seitz)
- [PATCH 1/2] drm/i915: Check whether the ring is initialised prior to dispatch
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Assert that the transcoder is indeed off before modifying it
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [Q77 express][x86_64][DRI][DRM/intel]Does intel_agp in the latest kernel 3.3.4 or 3.4 rc6 support ivybridge (xeon E3-1285, 3.6GHz)?
- From: yuanjingjie at ict.ac.cn (袁竞杰)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/2] drm/i915: Replace the feature tests for BLT/BSD with ring init checks
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Check whether the ring is initialised prior to dispatch
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915/dp: Remove eDP special cases from bandwidth checks
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915/dp: Remove eDP special cases from bandwidth checks
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.
- From: eric at anholt.net (Eric Anholt)
- [PATCH 2/2] configure: Bump version for 2.4.34.
- From: eric at anholt.net (Eric Anholt)
- [PATCH 25/25] drm/i915: hook Haswell devices in place
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 09/25] drm/i915: enable power wells on Haswell init
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 09/25] drm/i915: enable power wells on Haswell init
- From: daniel at ffwll.ch (Daniel Vetter)
- [PULL] drm-intel-next
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] configure: Bump version for 2.4.34.
- From: stereotype441 at gmail.com (Paul Berry)
- [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.
- From: stereotype441 at gmail.com (Paul Berry)
- [PATCH] i915: add dmabuf/prime buffer sharing support.
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] i915: add dmabuf/prime buffer sharing support.
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] i915: add dmabuf/prime buffer sharing support.
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: Simplify interrupt processing for IvyBridge
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: tiwai at suse.de (Takashi Iwai)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: tiwai at suse.de (Takashi Iwai)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: tiwai at suse.de (Takashi Iwai)
- [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: daniel at ffwll.ch (Daniel Vetter)
- How to build the Hardware Decode platform based on Ivy Bridge linux?
- From: wanglijun at kedacom.com (wanglijun at kedacom.com)
- [QA] Testing report for `drm-intel-testing` (was: Updated -next)
- From: guang.a.yang at intel.com (Yang, Guang A)
- [PATCH] drm/i915: Suppress hotplug work during PM suspend/resume
- From: tiwai at suse.de (Takashi Iwai)
- [PATCH 2/2] configure: Bump version for 2.4.34.
- From: eric at anholt.net (Eric Anholt)
- [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.
- From: eric at anholt.net (Eric Anholt)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 08/25] drm/i915: detect PCH encoders on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 09/25] drm/i915: enable power wells on Haswell init
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Introduce for_each_ring() macro
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 23/25] drm/i915: move HDMI structs to shared location
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 08/25] drm/i915: detect PCH encoders on Haswell
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 09/25] drm/i915: enable power wells on Haswell init
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: Simplify interrupt processing for IvyBridge
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Avoid a double-read of PCH_IIR during interrupt handling
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 25/25] drm/i915: hook Haswell devices in place
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 24/25] drm/i915: prepare HDMI link for Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 23/25] drm/i915: move HDMI structs to shared location
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 22/25] drm/i915: add WR PLL programming table
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 21/25] drm/i915: add support for DDI-controlled digital outputs
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 20/25] drm/i915: detect digital outputs on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 19/25] drm/i915: program iCLKIP on Lynx Point
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 18/25] drm/i915: disable pipe DDI function when disabling pipe
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 17/25] drm/i915: program WM_LINETIME on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 16/25] drm/i915: define Haswell watermarks and clock gating
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 15/25] drm/i915: use ironlake eld write routine for Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 14/25] drm/i915: support DDI training in FDI mode
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 13/25] drm/i915: initialize DDI buffer translations
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 12/25] drm/i915: account for only one PCH receiver on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 11/25] drm/i915: handle DDI-related assertions
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 10/25] drm/i915: add LPT PCH checks
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 09/25] drm/i915: enable power wells on Haswell init
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 08/25] drm/i915: detect PCH encoders on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 07/25] drm/i915: do not use fdi_normal_train on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 06/25] drm/i915: show unknown sdvox registers on hdmi init
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 05/25] drm/i915: properly check for pipe count
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 04/25] drm/i915: calculate watermarks for devices that have 3 pipes
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 03/25] drm/i915: add support for SBI ops
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 02/25] drm/i915: reuse Ivy Bridge interrupts code for Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 01/25] drm/i915: add new Haswell DIP controls registers
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 00/25] Haswell fixes
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: Avoid concurrent access when marking the device as idle/busy
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: sateesh.kavuri at intel.com (Sateesh Kavuri)
- [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: sateesh.kavuri at intel.com (Sateesh Kavuri)
- [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: vijay.a.purushothaman at intel.com (Purushothaman, Vijay A)
- [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: sahayashiny.mariavictor at lntinfotech.com (Engineer)
- [Intel-gfx] [PATCH 1/3] intel: Disable drm_intel_probe_agp_aperture_size() on Android
- From: iyshgopal at yahoo.co.in (iyshwarya)
- [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter
- From: airlied at gmail.com (Dave Airlie)
- [PATCH] [RFC] sched/drm: add infrastructure for gpu waits
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] tools: add Haswell registers into intel_reg_dumper
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] tools: add Haswell registers into intel_reg_dumper
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: s/intel_infoframe/gm45_infoframe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: s/intel_infoframe/gm45_infoframe
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/3] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Avoid concurrent access when marking the device as idle/busy
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Limit calling mark-busy only for potential scanouts
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 14/14] drm/i915: set the DIP port on ibx_write_infoframe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/3] drm/i915: s/intel_infoframe/gm45_infoframe
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/3] drm/i915: s/i9xx_/gm45_ for the gm45 write_infoframe function
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/3] drm/i915: replace intel_infoframe_freq with VIDEO_DIP_FREQ_VSYNC
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 08/14] drm/i915: break intel_infoframe_flags into _enable and _frequency
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 07/14] drm/i915: mask the video DIP port select
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] MAINTAINERS: switch drm/i915 to Daniel Vetter
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] configure: Bump version for 2.4.34.
- From: stereotype441 at gmail.com (Paul Berry)
- [PATCH 1/2] intel: Add the ability to supply annotations for .aub files.
- From: stereotype441 at gmail.com (Paul Berry)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: ben at bwidawsk.net (Ben Widawsky)
- g33 + dual head = problems
- From: avg at icyb.net.ua (Andriy Gapon)
- blank screen FUJITSU LIFEBOOK S760
- From: babarhaq at email.com (Babar Haq)
- [PULL] drm-intel-next manual merge
- From: daniel at ffwll.ch (Daniel Vetter)
- [PULL] drm-intel-fixes
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: eric at anholt.net (Eric Anholt)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: ben at bwidawsk.net (Ben Widawsky)
- NM10 chipset with GMA3600
- From: zhenyuw at linux.intel.com (Zhenyu Wang)
- Updated -next
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- blank screen FUJITSU LIFEBOOK S760
- From: patrakov at gmail.com (Alexander E. Patrakov)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: add interface to simulate gpu hangs
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: disable sdvo hotplug on i945g/gm
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: disable sdvo hotplug on i945g/gm
- From: daniel at ffwll.ch (Daniel Vetter)
- blank screen FUJITSU LIFEBOOK S760
- From: daniel at ffwll.ch (Daniel Vetter)
- blank screen FUJITSU LIFEBOOK S760
- From: babarhaq at email.com (Babar Haq)
- [PATCH 00/12] Infoframe fixes
- From: pross at xvid.org (Peter Ross)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: set IDICOS to medium uncore resources
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 13/14] drm/i915: ibx_write_infoframe can disable AVI
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 14/14] drm/i915: set the DIP port on ibx_write_infoframe
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 13/14] drm/i915: ibx_write_infoframe can disable AVI
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 12/14] drm/i915: split ironlake_write_infoframe into ibx_ and cpt_
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 11/14] drm/i915: simplify intel_encoder_commit
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 10/14] drm/i915: mask the video DIP frequency when changing it
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 09/14] drm/i915: disable the infoframe before changing it
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 08/14] drm/i915: break intel_infoframe_flags into _enable and _frequency
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 07/14] drm/i915: mask the video DIP port select
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 06/14] drm/i915: start writing infoframes at address 0 on gen 4
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 05/14] drm/i915: change coding style of the write_infoframe functions
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/14] drm/i915: touch the DIP control register after enabling the HDMI port
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 03/14] drm/i915: implement ironlake_wait_for_vblank
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 02/14] drm/i915: DSL_LINEMASK is 12 bits only on gen2
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 00/12] Infoframe fixes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed
- From: daniel at ffwll.ch (Daniel Vetter)
- Tearing video on Sandy Bridge
- From: tino.keitel+xorg at tikei.de (Tino Keitel)
- [PATCH 03/12 v2] drm/i915: move vbetool invoked ier stuff
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Reduce idle vblank wakeups
- From: mjg59 at srcf.ucam.org (Matthew Garrett)
- [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: fix gen4 gpu reset
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 02/10] drm/i915: rework dev->first_error locking
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 05/10] drm/i915: extract intel_gpu_reset
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 04/10] drm/i915: simplify i915_reset a bit
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 06/10] drm/i915: make gpu hangman more resilient
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 07/10] drm/i915: kill flags parameter for reset functions
- From: eugeni.dodonov at linux.intel.com (Eugeni Dodonov)
- [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: fix gen4 gpu reset
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: use mode values consistently when converting to sdvo dtd
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: disable sdvo hotplug on i945g/gm
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- Tearing video on Sandy Bridge
- From: tino.keitel+xorg at tikei.de (tino.keitel+xorg at tikei.de)
- g33 + dual head = problems
- From: chris at chris-wilson.co.uk (Chris Wilson)
- g33 + dual head = problems
- From: ajax at redhat.com (Adam Jackson)
- [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 10/12] drm/i915: mask the video DIP frequency when changing it
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 09/12] drm/i915: disable the infoframe before changing it
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 07/12] drm/i915: mask the video DIP port select
- From: eugeni at dodonov.net (Eugeni Dodonov)
- Tearing video on Sandy Bridge
- From: cshei at cs.indiana.edu (Chun-Yu Shei)
- Tearing video on Sandy Bridge
- From: tino.keitel+xorg at tikei.de (tino.keitel+xorg at tikei.de)
- Tearing video on Sandy Bridge
- From: daniel at ffwll.ch (Daniel Vetter)
- Tearing video on Sandy Bridge
- From: tino.keitel+xorg at tikei.de (Tino Keitel)
- [PATCH] drm/i915: add interface to simulate gpu hangs
- From: eugeni at dodonov.net (Eugeni Dodonov)
- Tearing video on Sandy Bridge
- From: daniel at ffwll.ch (Daniel Vetter)
- Tearing video on Sandy Bridge
- From: tino.keitel+xorg at tikei.de (tino.keitel+xorg at tikei.de)
- g33 + dual head = problems
- From: avg at icyb.net.ua (Andriy Gapon)
- [PULL] drm-intel-fixes
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Periodically sanity check power management
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Periodically sanity check power management
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Periodically sanity check power management
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Limit calling mark-busy only for potential scanouts
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Limit calling mark-busy only for potential scanouts
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: rip out unnecessary calls to drm_mode_set_crtcinfo
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 01/12] drm/i915: enable dip before writing data on gen4
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [3.4-rc5, SNB] transaction abort when suspending
- From: daniel at ffwll.ch (Daniel Vetter)
- [3.4-rc5, SNB] transaction abort when suspending
- From: daniel at quora.org (Daniel J Blueman)
- [PATCH] drm/i915: add interface to simulate gpu hangs
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- NM10 chipset with GMA3600
- From: lbg_147 at bluebottle.com (lbg_147 at bluebottle.com)
- [PATCH 03/12] drm/i915: implement ironlake_wait_for_vblank
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 02/12] drm/i915: DSL_LINEMASK is 12 bits only on gen2
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] seqno
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Limit calling mark-busy only for potential scanouts
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Avoid concurrent access when marking the device as idle/busy
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Avoid concurrent access when marking the device as idle/busy
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] seqno
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 01/12] drm/i915: enable dip before writing data on gen4
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 0/5 v3] timed BO wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 00/12] Infoframe fixes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 12/12] drm/i915: simplify intel_encoder_commit
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 11/12] drm/i915: split ironlake_write_infoframe into ibx_ and cpt_
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 10/12] drm/i915: mask the video DIP frequency when changing it
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 09/12] drm/i915: disable the infoframe before changing it
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 08/12] drm/i915: break intel_infoframe_flags into _enable and _index
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 07/12] drm/i915: mask the video DIP port select
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 06/12] drm/i915: start writing infoframes at address 0 on gen 4
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 05/12] drm/i915: change coding style of the write_infoframe functions
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/12] drm/i915: touch the DIP control register after enabling the HDMI port
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 03/12] drm/i915: implement ironlake_wait_for_vblank
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 02/12] drm/i915: DSL_LINEMASK is 12 bits only on gen2
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 01/12] drm/i915: enable dip before writing data on gen4
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/5] drm/i915: timeout parameter for seqno wait
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/5] drm/i915: wait render timeout ioctl
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/5 v2] drm/i915: extract some common olr+wedge code
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs
- From: ben at bwidawsk.net (Ben Widawsky)
- HDMI problems when using a A/V receiver
- From: linux at clnt.de (linux at clnt.de)
- HDMI problems when using a A/V receiver
- From: linux at clnt.de (linux at clnt.de)
- [PATCH] drm/i915: fix gen4 gpu reset
- From: kenneth at whitecape.org (Kenneth Graunke)
- [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Wait for the clocks to stabilise before updating PLLs
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: fix gen4 gpu reset
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/10] drm/i915: add interface to simulate gpu hangs
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Only enable IPS polling for gen5
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Do not read non-existent DPLL registers on PCH hardware
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/overlay: Fully configure overlay before turning on
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 00/17] dri1 dragon slaughtering, v2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Do not read non-existent DPLL registers on PCH hardware
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: rip out intel_dpio_write again
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: Simplify the IVB interrupt handler
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Support pageflipping interrupts for all 3-pipes on IVB
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 19/24] drm/i915: detect digital outputs on Haswell
- From: keithp at keithp.com (Keith Packard)
- [PATCH 5/5] drm/i915: l3 parity sysfs interface
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 5/5] drm/i915: l3 parity sysfs interface
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/5] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: Dynamic Parity Detection handling
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Remove unused dev_priv->vblank_pipe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Remove unused ring->irq_seqno
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Only enable IPS polling for gen5
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 13/28] drm/i915: Avoid clearing preallocated regions from the GTT
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 13/28] drm/i915: Avoid clearing preallocated regions from the GTT
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: time out of load detect busy-waits
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/5] drm/i915: wait render timeout ioctl
- From: eric at anholt.net (Eric Anholt)
- [PATCH 19/24] drm/i915: detect digital outputs on Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Only enable IPS polling for gen5
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [ANNOUNCE] xf86-video-intel 2.19.0 [resend]
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/5] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 19/24] drm/i915: detect digital outputs on Haswell
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 22/24] drm/i915: move HDMI structs to shared location
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 20/24] drm/i915: add support for DDI-controlled digital outputs
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 19/24] drm/i915: detect digital outputs on Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 15/24] drm/i915: initialize DDI buffer translations
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 18/24] drm/i915: program iCLKIP on Lynx Point
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 17/24] drm/i915: disable pipe DDI function when disabling pipe
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 15/24] drm/i915: initialize DDI buffer translations
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 14/24] drm/i915: account for only one PCH receiver on Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 13/24] drm/i915: handle DDI-related assertions
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 12/24] drm/i915: add LPT PCH checks
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 11/24] drm/i915: program WM_LINETIME on Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 10/24] drm/i915: enable power wells on haswell init
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 09/24] drm/i915: detect PCH encoders on Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 08/24] drm/i915: do not use fdi_normal_train on haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 07/24] drm/i915: show unknown sdvox registers on hdmi init
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 06/24] drm/i915: properly check for pipe count
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 05/24] drm/i915: reuse Ivybridge interrupts code for Haswell
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 04/24] drm/i915: calculate same watermarks on Haswell as on Ivy Bridge
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 03/24] drm/i915: add support for SBI ops
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- TIMESTAMP register
- From: eric at anholt.net (Eric Anholt)
- [PATCH] drm/i915: Only enable IPS polling for gen5
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Remove unused dev_priv->vblank_pipe
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 05/10] drm/i915: extract intel_gpu_reset
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] tests/wait render timeout test
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] intel: add a timed wait function
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 5/5] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/5 v3] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/5 v2] drm/i915: extract some common olr+wedge code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: make waiting trace events more useful
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5 v2] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 0/5 v3] timed BO wait
- From: ben at bwidawsk.net (Ben Widawsky)
- how to install xf86-video-intel.
- From: kenneth at whitecape.org (Kenneth Graunke)
- Intel HD3000 Graphics + i3-2330M CPU
- From: kenneth at whitecape.org (Kenneth Graunke)
- [PATCH] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: chris at chris-wilson.co.uk (Chris Wilson)
- Intel HD3000 Graphics + i3-2330M CPU
- From: mail at t-brieskorn.de (Torsten Brieskorn)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: chris at chris-wilson.co.uk (Chris Wilson)
- how to install xf86-video-intel.
- From: jeffsoft at 163.com (jeffsoft)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Always update RPS interrupts thresholds along with frequency
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Remove unused ring->irq_seqno
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/12] drm/i915: extract some common olr+wedge code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/2] drm/i915: time out of load detect busy-waits
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 09/12] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [ANNOUNCE] GLAMOR 0.4 Release
- From: zhigang.gong at linux.intel.com (Zhigang Gong)
- [ANNOUNCE] GLAMOR 0.4 Release
- From: zhigang.gong at linux.intel.com (Zhigang Gong)
- [PATCH] drm/i915: Remove unused ring->irq_seqno
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Always update RPS interrupts thresholds along with frequency
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 01/10] drm/i915: add interface to simulate gpu hangs
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/12] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] l3 parity tool
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 5/5] drm/i915: l3 parity sysfs interface
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/5] drm/i915: remap l3 on hw init
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/5] drm/i915: enable parity error interrupts
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: Dynamic Parity Detection handling
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5] drm/i915: Use a global lock for modifying global irq flags
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 0/5] Dynamic Parity Detection/Correction
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/10] drm/i915: kill gen4 gpu reset code
- From: eric at anholt.net (Eric Anholt)
- [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 1/2] drm/i915: i915.enable_backlight=0 disables intel_backlight
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH] properly enable the blc controller on the right pipe
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH v2] drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH v2] drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
- From: kenneth at whitecape.org (Kenneth Graunke)
- [PATCH] drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
- From: kenneth at whitecape.org (Kenneth Graunke)
- [PATCH 10/10] drm/i915: kill gen4 gpu reset code
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 10/10] drm/i915: kill gen4 gpu reset code
- From: eric at anholt.net (Eric Anholt)
- [PATCH] drm/i915: enable semaphores on gen6 if dmar is not active
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: gen6_enable_rps() wants to be called after ring initialisation
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 0/4] drm/i915: Re: clear up backlight inversion confusion on gen4
- From: monark.2607 at gmail.com (Monark Gondaliya)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 09/12] drm/i915: timeout parameter for seqno wait
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 08/12 v2] drm/i915: use __wait_seqno for ring throttle
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 05/12 v2] drm/i915: drop polled waits from i915_wait_request
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 04/12 v2] drm/i915: kill waiting_seqno
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/12 v2] drm/i915: move vbetool invoked ier stuff
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 01/12 v2] drm/i915: remove do_retire from i915_wait_request
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 02/12] drm/i915: remove some extra retiring
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 09/12] drm/i915: timeout parameter for seqno wait
- From: chris at chris-wilson.co.uk (Chris Wilson)
- Updated -next
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 10/10] drm/i915: kill gen4 gpu reset code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 09/10] drm/i915: remove modeset reset from i915_reset
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 08/10] drm/i915: also reset the media engine on gen4/5
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 07/10] drm/i915: kill flags parameter for reset functions
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 06/10] drm/i915: make gpu hangman more resilient
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 05/10] drm/i915: extract intel_gpu_reset
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 04/10] drm/i915: simplify i915_reset a bit
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 03/10] drm/i915: allow the existing error_state to be destroyed
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 02/10] drm/i915: rework dev->first_error locking
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 01/10] drm/i915: add interface to simulate gpu hangs
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- Updated -next
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 10/12] drm/i915: extract some common olr+wedge code
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [RFC] drm/i915: Move the STC LRA eviction policy workaround after ring init.
- From: daniel at ffwll.ch (Daniel Vetter)
- [RFC] drm/i915: Move the STC LRA eviction policy workaround after ring init.
- From: kenneth at whitecape.org (Kenneth Graunke)
- [PATCH 0/6] gpu hangman support
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 12/12] drm/i915: s/i915_wait_reqest/i915_wait_seqno/g
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 11/12 v2] drm/i915: wait render timeout ioctl
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/12] drm/i915: extract some common olr+wedge code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/12] drm/i915: timeout parameter for seqno wait
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 08/12 v2] drm/i915: use __wait_seqno for ring throttle
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 07/12] drm/i915: remove polled wait from throttle
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 06/12 v2] drm/i915: extract __wait_seqno from i915_wait_request
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 05/12 v2] drm/i915: drop polled waits from i915_wait_request
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 04/12 v2] drm/i915: kill waiting_seqno
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 03/12 v2] drm/i915: move vbetool invoked ier stuff
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 02/12] drm/i915: remove some extra retiring
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/12 v2] drm/i915: remove do_retire from i915_wait_request
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 00/12 v2] wait for BO with timeout
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/17] drm/i915: move dri1 vblank stubs to i915_dma.c
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 17/17] drm/i915: move pnv|ilk_gem_mem_freq to intel_pm.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 16/17] drm/i915: fixup __iomem mixups in ringbuffer.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 15/17] drm/i915: rework legacy GFX HWS handling
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 14/17] drm/i915: kill pointless clearing of dev_priv->hws_map
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 13/17] drm/i915: move rps/emon function declarations
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 12/17] drm/i915: move the ips code to intel_pm.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 11/17] drm/i915: disallow clip rects on gen5+
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 10/17] drm/i915: move LP_RING&friends to i915_dma.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 09/17] drm/i915: extract dri1 breadcrumb update from irq handler
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 08/17] drm/i915: move dri1 irq ioctl code to i915_dma.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 07/17] drm/i915: rip out dri1 breadcrumb updates from gen5+ irq handlers
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 06/17] drm/i915: kill intel_clear_scanline_wait
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 05/17] drm/i915: remove LP_RING&friends from modeset code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 04/17] drm/i915: rip out dev_priv->tex_lru_log_granularity
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 03/17] drm/i915 disallow physical batchbuffers for KMS
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 02/17] drm/i915: create dev_priv->dri1 dragon dungeon^W^W sub-struct
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 01/17] drm/i915: move dri1 vblank stubs to i915_dma.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 00/17] dri1 dragon slaughtering, v2
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 00/17] dri1 dragon slaughtering, v2
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 12/12] drm/i915: Remove unused and unloved vblank macros
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: i915.enable_backlight=0 disables intel_backlight
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 14/24] drm/i915: account for only one PCH receiver on Haswell
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 16/24] drm/i915: support DDI training in FDI mode
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: Prefer to pageflip on the active ring on IvyBridge
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 02/24] drm/i915: support infoframes on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] properly enable the blc controller on the right pipe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 15/24] drm/i915: initialize DDI buffer translations
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] properly enable the blc controller on the right pipe
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH 04/24] drm/i915: calculate same watermarks on Haswell as on Ivy Bridge
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 04/24] drm/i915: calculate same watermarks on Haswell as on Ivy Bridge
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 24/24] drm/i915: hook Haswell devices in place
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 23/24] drm/i915: prepare HDMI link for Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 22/24] drm/i915: move HDMI structs to shared location
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 21/24] drm/i915: add WR PLL programming table
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 20/24] drm/i915: add support for DDI-controlled digital outputs
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 19/24] drm/i915: detect digital outputs on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 18/24] drm/i915: program iCLKIP on Lynx Point
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 17/24] drm/i915: disable pipe DDI function when disabling pipe
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 16/24] drm/i915: support DDI training in FDI mode
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 15/24] drm/i915: initialize DDI buffer translations
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 14/24] drm/i915: account for only one PCH receiver on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 13/24] drm/i915: handle DDI-related assertions
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 12/24] drm/i915: add LPT PCH checks
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 11/24] drm/i915: program WM_LINETIME on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 10/24] drm/i915: enable power wells on haswell init
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 09/24] drm/i915: detect PCH encoders on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 08/24] drm/i915: do not use fdi_normal_train on haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 07/24] drm/i915: show unknown sdvox registers on hdmi init
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 06/24] drm/i915: properly check for pipe count
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 05/24] drm/i915: reuse Ivybridge interrupts code for Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 04/24] drm/i915: calculate same watermarks on Haswell as on Ivy Bridge
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 03/24] drm/i915: add support for SBI ops
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 02/24] drm/i915: support infoframes on Haswell
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 01/24] drm/i915: add Haswell DIP controls registers
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH 00/24] Haswell v4
- From: eugeni.dodonov at intel.com (Eugeni Dodonov)
- [PATCH] properly enable the blc controller on the right pipe
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] properly enable the blc controller on the right pipe
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/4] drm/i915: add quirk to indicate that an alt bit is used for brightness inversion
- From: daniel at ffwll.ch (Daniel Vetter)
- [pull] drm-intel-fixes for 3.4
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: handle input/output sdvo timings separately in mode_set
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/i915: assign the brightness inversion quirk to Acer Aspire 5734Z
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH 3/4] drm/i915: add quirk to indicate that an alt bit is used for brightness inversion
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH 2/4] drm/i915: completely revert the invert brightness quirk
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH 1/4] drm/i915: clear up backlight inversion confusion on gen4
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH 0/4] drm/i915: Re: clear up backlight inversion confusion on gen4
- From: C.Emde at osadl.org (Carsten Emde)
- [PATCH] drm/i915: handle input/output sdvo timings separately in mode_set
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: use the new masked bit macro some more
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [pull] drm-intel-fixes for 3.4
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Periodically sanity check power management
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Program the correct frequencies into the interrupt thresholds
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 6/6] drm/i915: make gpu hangman more resilient
- From: daniel at ffwll.ch (Daniel Vetter)
- [QA] Testing report for `drm-intel-testing` (was: Updated -next)
- From: yi.sun at intel.com (Sun, Yi)
- [PATCH 1/6] drm/i915: add interface to simulate gpu hangs
- From: eugeni at dodonov.net (Eugeni Dodonov)
- [PATCH 4/6] drm/i915: simplify i915_reset a bit
- From: eric at anholt.net (Eric Anholt)
- [PATCH 11/12] drm/i915: Inline I915_INTERRUPT_ENABLE_FIX
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/6] drm/i915: simplify i915_reset a bit
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 12/12] drm/i915: Remove unused and unloved vblank macros
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 11/12] drm/i915: Inline I915_INTERRUPT_ENABLE_FIX
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 10/12] drm/i915: Handle PendingFlip on gen3 robustly
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 09/12] drm/i915: Cleanup gen3 irq uninstall
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 08/12] drm/i915: HWSTAM is only 16-bit on gen3
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 07/12] drm/i915: Remove gen4 irq code from gen3 irq routine
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 06/12] drm/i915: Remove gen3 irq code from gen4 irq routine
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 05/12] drm/i915: Clear FlipDone semantics change for pageflipping on gen3
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/6] drm/i915: simplify i915_reset a bit
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/6] drm/i915: simplify i915_reset a bit
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: allow the existing error_state to be destroyed
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: time out of load detect busy-waits
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Always unsuppress down-interrupts when programming a non-min value
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: quirk disable i915 backlight on Dell XPS 13z
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 1/2] drm/i915: i915.enable_backlight=0 disables intel_backlight
- From: kamal at canonical.com (Kamal Mostafa)
- [PATCH 1/2] drm/i915: time out of load detect busy-waits
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: extract intel_gpu_reset
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/6] drm/i915: simplify i915_reset a bit
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: extract intel_gpu_reset
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/6] gpu hangman support
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 6/6] drm/i915: make gpu hangman more resilient
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
[Index of Archives]
[Linux USB]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]