i915_dma.c contains most of the old dri1 horror-show, so move
the remaining bits there, too. The code has been removed and
the only thing left are some stubs to ensure that userspace
doesn't try to use this stuff. vblank_pipe_set only returns 0
without any side-effects, so we can even stub it out with
the canonical drm_noop.
v2: Rebase against ENODEV changes.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_dma.c | 44 +++++++++++++++++++++++++++-
drivers/gpu/drm/i915/i915_drv.h | 7 ----
drivers/gpu/drm/i915/i915_irq.c | 61 ---------------------------------------
3 files changed, 43 insertions(+), 69 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 7a55abb..653fc86 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -721,6 +721,48 @@ fail_batch_free:
return ret;
}
+static int i915_vblank_pipe_get(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_vblank_pipe_t *pipe = data;
+
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ return -ENODEV;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+
+ return 0;
+}
+
+/**
+ * Schedule buffer swap at given vertical blank.
+ */
+static int i915_vblank_swap(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ /* The delayed swap mechanism was fundamentally racy, and has been
+ * removed. The model was that the client requested a delayed flip/swap
+ * from the kernel, then waited for vblank before continuing to perform
+ * rendering. The problem was that the kernel might wake the client
+ * up before it dispatched the vblank swap (since the lock has to be
+ * held while touching the ringbuffer), in which case the client would
+ * clear and start the next frame before the swap occurred, and
+ * flicker would occur in addition to likely missing the vblank.
+ *
+ * In the absence of this ioctl, userland falls back to a correct path
+ * of waiting for a vblank, then dispatching the swap on its own.
+ * Context switching to userland and back is plenty fast enough for
+ * meeting the requirements of vblank swapping.
+ */
+ return -EINVAL;
+}
+
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -2156,7 +2198,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0095c8d..d60b573 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1155,13 +1155,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
extern void intel_irq_init(struct drm_device *dev);
-extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-extern int i915_vblank_swap(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
-
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5c360ee..874956c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1628,67 +1628,6 @@ static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
-
-/* Set the vblank monitor pipe
- */
-int i915_vblank_pipe_set(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (drm_core_check_feature(dev, DRIVER_MODESET))
- return -ENODEV;
-
- if (!dev_priv) {
- DRM_ERROR("called with no initialization\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-int i915_vblank_pipe_get(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- drm_i915_vblank_pipe_t *pipe = data;
-
- if (drm_core_check_feature(dev, DRIVER_MODESET))
- return -ENODEV;
-
- if (!dev_priv) {
- DRM_ERROR("called with no initialization\n");
- return -EINVAL;
- }
-
- pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
-
- return 0;
-}
-
-/**
- * Schedule buffer swap at given vertical blank.
- */
-int i915_vblank_swap(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- /* The delayed swap mechanism was fundamentally racy, and has been
- * removed. The model was that the client requested a delayed flip/swap
- * from the kernel, then waited for vblank before continuing to perform
- * rendering. The problem was that the kernel might wake the client
- * up before it dispatched the vblank swap (since the lock has to be
- * held while touching the ringbuffer), in which case the client would
- * clear and start the next frame before the swap occurred, and
- * flicker would occur in addition to likely missing the vblank.
- *
- * In the absence of this ioctl, userland falls back to a correct path
- * of waiting for a vblank, then dispatching the swap on its own.
- * Context switching to userland and back is plenty fast enough for
- * meeting the requirements of vblank swapping.
- */
- return -EINVAL;
-}
-
static u32
ring_last_seqno(struct intel_ring_buffer *ring)
{
--
1.7.7.6
