U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH] MIPS: import optimized string functions from Linux
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: import optimized string functions from Linux
  • From: Aleksey Kuleshov <rndfax@xxxxxxxxx>
• Re: [just RFC 0/2] serial: ns16550: add Ralink UART support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] eeprom: Add support for 24c1025 EEPROM
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] spi: i.MX: optimize transfers for ECSPI v2.3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mtd: core: initialize *retlen in mtd_write()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] reset: Remove unused *_optional functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] reset: Add gpio reset support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] reset: Allow dummy reset lines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: pwm-backlight: Honour discrete brightness levels from dt
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: i.MX IPUv3: Set ldb clocks correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [just RFC 0/2] serial: ns16550: add Ralink UART support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [just RFC 2/2] serial: ns16550: add Ralink UART support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [just RFC 1/2] serial: ns16550: introduce custom divisor latch setter
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] net: usb: asix: fix 'no previous prototype' warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: usb: asix: make rx_fixup ax_skb buffer aligned
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] regulator: add runtime disable/enable support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fix warning: remove unused variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] font: fbconsole: add custom font supports
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/19] Armada 370/XP NAND driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] readline: Kconfig: fix typo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] state: make type check error verbose
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Add support for Digi ConnectCore ccxmx53 board.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: usb: asix: fix 'no previous prototype' warning
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] net: usb: asix: make rx_fixup ax_skb buffer aligned
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC] regulator: add runtime disable/enable support
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• [PATCH] fix warning: remove unused variable
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] font: fbconsole: add custom font supports
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH v2 17/19] mtd: nand_mrvl_nfc: Add support for NDCB3 register
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 09/19] mtd: nand_mrvl_nfc: Protect mrvl_nand_probe_dt
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 18/19] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 16/19] mtd: nand_mrvl_nfc: Add support for HW BCH ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 19/19] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 04/19] arm: pxa: Add clock for Zylonite NFC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 03/19] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 07/19] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 13/19] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 08/19] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 15/19] mtd: nand_mrvl_nfc: Add support for 8bit BCH HW ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 00/19] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 05/19] mtd: nand_mrvl_nfc: Use common clock for core clock
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 14/19] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 02/19] mtd: nand: Clarify Marvell Orion Kconfig prompt
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 11/19] mtd: nand_mrvl_nfc: Get ecc parameters from DT
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 10/19] mtd: nand_mrvl_nfc: Fix num-cs property parsing
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 06/19] arm: pxa: Remove pxa_get_nandclk()
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH v2 01/19] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] readline: Kconfig: fix typo
  • From: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@xxxxxxxxxxxx>
• [PATCH] state: make type check error verbose
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• Re: [PATCH] i2c: core: Add client I2C address to devinfo
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: bootm multi uimage from nand
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eth: Remove ethaddr_param
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v2] Add support for Digi ConnectCore ccxmx53 board.
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: ccxmx53: Add support for Digi ccxmx53 board.
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] i2c: core: Add client I2C address to devinfo
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 1/2] bootm: cleanup bootm_open_oftree
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• [PATCH 2/2] bootm: get file type before bootm_open_os_uimage
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• [PATCH] net: eth: Remove ethaddr_param
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• bootm multi uimage from nand
  • From: Jan Remmet <j.remmet@xxxxxxxxx>
• Re: [PATCH v2] i2c: Add support for DesignWare controllers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] add multiplexed I2C bus support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mci: core: bus-width property should override driver default
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: mx6sx-sabresdb: drop unneeded makefile rules
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 0/2] add multiplexed I2C bus support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] net: fec: set phy reset time to 1ms
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add support for DesignWare controllers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2] i2c: Add support for DesignWare controllers
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: add pca954x bus multiplexer driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/2] i2c: import multiplexed I2C bus core support from linux kernel
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/2] add multiplexed I2C bus support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/4] mci: dw_mmc: Add support for high speed modes
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 3/4] mci: dw_mmc: Delete devname in platform_data
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 2/4] mci: dw_mmc: socfpga: Supply bus-width in platform_data
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 1/4] mci: core: bus-width property should override driver default
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: mx6sx-sabresdb: drop unneeded makefile rules
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/2] ARM: mx6sx-sabresdb: set proper hostname
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: ccxmx53: Add support for Digi ccxmx53 board.
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [RFC 0/2] add multiplexed I2C bus support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 1/2] i2c: import multiplexed I2C bus core support from linux kernel
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/2] i2c: add pca954x bus multiplexer driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 2/3] net: fec: implement dtb property phy-reset-duration
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH v2 3/3] net: fec: fix indentation and whitspaces
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH v2 1/3] net: fec: set phy reset time to 1ms
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH v2 2/3] net: fec: implement dtb property phy-reset-duration
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: ccxmx53: Add support for Digi ccxmx53 board.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Makefile: set -Wmissing-prototypes on all architechtures (was only on mips)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: ccxmx53: Formatting changes and remove un-used code.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] make_directory: fix warning: no previous prototype
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] crypto: crc32: fix warnings: no previous prototype for 'crc32', 'crc32_no_comp', 'file_crc'
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: ccxmx53: Added memory detection
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• [PATCH 1/4] ARM: ccxmx53: Add support for Digi ccxmx53 board.
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• [PATCH 4/4] ARM: ccxmx53: Formatting changes and remove un-used code.
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• [PATCH 3/4] ARM: ccxmx53: Add 512MB and 1GB boards.
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• Re: [PATCH 2/3] net: fec: implement dtb property phy-reset-durationy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Makefile: set -Wmissing-prototypes on all architechtures (was only on mips)
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] net: fec: implement dtb property phy-reset-durationy
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 2/3] make_directory: fix warning: no previous prototype
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• [PATCH 3/3] Makefile: set -Wmissing-prototypes on all architechtures (was only on mips)
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• [PATCH 1/3] crypto: crc32: fix warnings: no previous prototype for 'crc32', 'crc32_no_comp', 'file_crc'
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• loadb console cleanups
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] loadb: deactivate console before using it for loadb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] loadb: Allow to specify device to use
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] loads: Use putchar rather than console_putc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] loadb: Use local cdev
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] console: Set baudrate during registration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Shell loop bug?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Shell loop bug?
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH 2/3] net: fec: implement dtb property phy-reset-duration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: readline support ctrl-l to clear screen
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] net: fec: implement dtb property phy-reset-duration
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 1/3] net: fec: set phy reset time to 1ms
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 2/3] net: fec: implement dtb property phy-reset-duration
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 3/3] net: fec: fix indentation and whitspaces
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: readline support ctrl-l to clear screen
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] lib: readline support ctrl-l to clear screen
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] lib: readline support ctrl-l to clear screen
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [RFC 0/4] FIT Support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 0/4] FIT Support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] font: fbconsole: add custom font support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fbconsole: register fonts dynamically
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: rtl8169: get rid of DMA_ADDRESS_BROKEN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] wdog: imx-wd: watchdog cannot be disabled again
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: Fix bug in remap_range
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] graphics_utils: check for valid framebuffer before creating a screen
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] video: imx: quieten down VPL output
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: ventana: remove unneeded clock init in DCD
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] net: designware: Don't hang in reset with powered down phy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] docproc: drop unused utility
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: watchdog: Add support for omap_wdt
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] MIPS: ath79: skip pbl lowlevel init if running from RAM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• MCI bus-width host caps via device tree don't work properly for dw and imx
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] net: rtl8169: get rid of DMA_ADDRESS_BROKEN
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] wdog: imx-wd: watchdog cannot be disabled again
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH] font: fbconsole: add custom font support
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH v3] net: designware: Don't hang in reset with powered down phy
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] video: imx: quieten down VPL output
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: ventana: remove unneeded clock init in DCD
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH v2] net: designware: Don't hang in reset with powered down phy
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: Create for_each_i2c_adapter()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c_probe: Make command easier to work with
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] pbl: console: Use console_putc to output the carriage return
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 0/4] FIT Support
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH v2] defaultenv: boot/net: Boot initramfs from tftp if present
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH] docproc: drop unused utility
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• [PATCH v2 2/3] MIPS: black-swift: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 3/3] MIPS: tplink-mr3020: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 1/3] MIPS: pbl: add pbl_blt macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 0/3] MIPS: ath79: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 0/3] MIPS: ath79: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] socfpga: Initialize emac physels to RGMII correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: Don't hang in reset with powered down phy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] driver: watchdog: Add support for omap_wdt
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH] firmware: socfpga: Add parameter "programmed" to fpgamgr driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: black-swift: skip pbl lowlevel init if running from RAM
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: pbl: add pbl_blt macro
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] MIPS: support return from exception; allow user to pass incorrect address to md command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] docproc: sync with linux-4.3 kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] MIPS: pbl: add pbl_blt macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/3] MIPS: tplink-mr3020: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/3] MIPS: black-swift: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/3] MIPS: ath79: skip pbl lowlevel init if running from RAM
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] socfpga: Initialize emac physels to RGMII correctly
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] net: designware: Don't hang in reset with powered down phy
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] firmware: socfpga: Add parameter "programmed" to fpgamgr driver
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH] docproc: sync with linux-4.3 kernel
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Rework towards phytec-som-imx6 and new variants
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.mx53: Add support for Digi ConnectCore ccwmx53 SOM
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] mk-omap-image: make some locally used functions static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] docproc: sync with linux-4.3 kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] MIPS: traps.c: separate registers print stuff to show_regs()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/4] MIPS: allow user to pass incorrect address to md command
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/4] MIPS: support return from exception; allow user to pass incorrect address to md command
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/4] MIPS: import exception registers restoring macros from linux kernel
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/4] MIPS: avoid excessive exception
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] ARM: i.mx53: Add support for Digi ConnectCore ccwmx53 SOM
  • From: Jason Cobham <cobham.jason@xxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Rework towards phytec-som-imx6 and new variants
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH] lib: font: fbconsole: add custom font support
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] common: filetype: do not redetect MBR-type devices as a FAT-type
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] mk-omap-image: make some locally used functions static
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• [PATCH] docproc: sync with linux-4.3 kernel
  • From: Sergey Koshechkin <serge.koshechkin@xxxxxxxxx>
• [PATCH v2] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH] fbconsole: move font variable into struct font_desc
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH Mütze] ARM: don't let the unwinder depend on exception handling
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Rework towards phytec-som-imx6 and new variants
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: mx25: fix bit position of "Host power mask"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] ARM: imx6: add MMDC arbitration control register define
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fbconsole: move font variable into struct font_desc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: fix coding style
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Add support for DesignWare controllers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: smhfs: Fix return value of truncate()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fs: smhfs: Fix return value of truncate()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] i2c: Add support for DesignWare controllers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] i2c-imx: Use xzalloc instead of kzalloc
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] fbconsole: move font variable into struct font_desc
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] lib: fix coding style
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH 4/7] ARM: microsom: import DCD from SolidRun U-Boot
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 5/7] ARM: microsom: add full set of module variants on Hummingboard
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/7] ARM: microsom: delete cargo-cult from Makefile
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/7] ARM: microsom: change barebox image name for Hummingboard
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: microsom: get MAC address from fuses
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 6/7] ARM: microsom: make ETH work on production modules
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/7] ARM: imx6: add MMDC arbitration control register define
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• v2015.11.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: mx25: fix bit position of "Host power mask"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/10] ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 08/10] ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 05/10] ARM: pfla02: append suffix 1bank
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 06/10] ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 07/10] ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 02/10] boards: Add phytec-som-imx6
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 03/10] ARM: phytec-som-imx6: set loadaddr to start of DDR memory.
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 00/10] Rework towards phytec-som-imx6 and new variants
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 04/10] ARM: phytec-som-imx6: update environment
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 01/10] ARM: imx6: phycard: use numeric suffix in device tree
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH Mütze] ARM: don't let the unwinder depend on exception handling
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] fb & fbconsole misc fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] fb: alloc or free shadowfb whether fb enabled or disabled
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/3] fb & fbconsole misc fixes
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/3] fbconsole: no need to copy extra line
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/3] fb: satisfy semantics for shadowfb's alloc/free
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] edit: Return error when save_file failed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Embedsky E9 changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] net: phy: wait for link OK after successfull autonegotiation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] omap socfpga: Switch in flash env loading to use different config
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: Print versions with micro levels correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dts: phyFLEX-AM335x: Disable second ethernet interface
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] hush: Add missing initialize_context() in some places
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] embedsky-e9: enable barebox_update command for booter update
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH v2 2/2] images: Embedsky E9: use image name like the rest of boards
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH v2 0/2] Embedsky E9 changes
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH v2] net: phy: wait for link OK after successfull autonegotiation
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH] omap socfpga: Switch in flash env loading to use different config
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] mci: Print versions with micro levels correctly
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: font: fbconsole: add custom font support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Source command with zero-sized files
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Source command with zero-sized files
  • From: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@xxxxxxxxxxxx>
• [PATCH] lib: font: fbconsole: add custom font support
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH v2] edit: Return error when save_file failed
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] edit: Return error when save_file failed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: font: fbconsole: add custom font support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] edit: Return error when save_file failed
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2] edit: Return error when save_file failed
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• Re: memcpy strange behaviour
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• memcpy strange behaviour
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] edit: Return error when save_file failed
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: am335x_defconfig: Enable SMSC phy driver
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH 1/2] dts: phyFLEX-AM335x: Disable second ethernet interface
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH resend 0/2] mips: c-r4k: detect secondary cache
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] MIPS: ath79: add ar9331 pbl support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: some patches are missed in the next branch
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: some patches are missed in the next branch
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: some patches are missed in the next branch
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 2/9] MIPS: ath79: add pbl_ar9331_ddr2_config macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 7/9] MIPS: ath79: add pbl_ar9331_ddr1_config macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 9/9] MIPS: tplink-mr3020_defconfig: enable pbl; make image shorter
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 1/9] MIPS: ath79: add pbl_ar9331_pll macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 5/9] MIPS: ath79: add black-swift board support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 0/9] MIPS: ath79: add ar9331 pbl support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 8/9] MIPS: tplink-mr3020: add pbl low level init
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 4/9] MIPS: ath79: add debug_ll_ar9331_init macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 3/9] MIPS: ath79: add pbl_ar9331_uart_enable macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 6/9] MIPS: ath79: add black-swift_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• some patches are missed in the next branch
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 8/9] MIPS: tplink-mr3020: add pbl low level init
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 4/9] MIPS: mach-ath79: add debug_ll_ar9331_init macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 9/9] MIPS: tplink-mr3020_defconfig: enable pbl; make image shorter
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 5/9] MIPS: ath79: add black-swift board support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/9] MIPS: ar933x: pbl: add pbl_ar9331_pll macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/9] MIPS: ar933x: pbl: add pbl_ar9331_ddr2_config macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/9] MIPS: mach-ath79: add pbl_ar9331_uart_enable macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 7/9] MIPS: mach-ath79: add pbl_ar9331_ddr1_config macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 6/9] MIPS: mach-ath79: add black-swift_defconfig
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/9] MIPS: add ar9331 pbl support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH resend 1/2] mips: c-r4k: detect secondary cache
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH resend 2/2] mips: cpuinfo: report secondary cache configuration
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH resend 0/2] mips: c-r4k: detect secondary cache
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 1/2] mips: c-r4k: detect secondary cache
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 2/2] mips: cpuinfo: report secondary cache configuration
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• mips: detect and report secondary cache configuration
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] defaultenv: boot/net: Boot initramfs from tftp if present
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add support for DesignWare controllers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] embedsky-e9: cleanup and reorder DTS nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] embedsky-e9: enable barebox_update command for booter update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: phy: wait for link OK after successfull autonegotiation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] lib: font: fbconsole: add custom font support
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH v3 2/2] arm/cpu: Avoid multiple definitions of barebox_arm_entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] login: make some locally used functions static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] login: make some locally used functions static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ata: disk_ata_drive: remove obsolete check for ID validity
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] login: make some locally used functions static
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] memtest: Fix reference to non-existing function
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] i2c: Add support for DesignWare controllers
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/3] ARM: i.MX6Q: Add support for Embedsky E9 board, part 2
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH 1/3] embedsky-e9: defconfig for Embedsky E9
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH 3/3] embedsky-e9: cleanup and reorder DTS nodes
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH 2/3] embedsky-e9: enable barebox_update command for booter update
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH] Improve PHY AutoNeg procedure
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH] net: phy: wait for link OK after successfull autonegotiation
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• [PATCH v3 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 2/2] arm/cpu: Avoid multiple definitions of barebox_arm_entry
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] lib: font: fbconsole: add custom font support
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] login: make some locally used functions static
  • From: Sergey Koshechkin <tritel59@xxxxxxxxx>
• Re: [BUG] ata: disk_ata_drive: SSD drive doesn't pass check for ata id validity
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] ata: disk_ata_drive: remove obsolete check for ID validity
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [BUG] ata: disk_ata_drive: SSD drive doesn't pass check for ata id validity
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: Booting Linux bzImage on x86_64
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• Re: [BUG] ata: disk_ata_drive: SSD drive doesn't pass check for ata id validity
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: Add support for semihosting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [BUG] ata: disk_ata_drive: SSD drive doesn't pass check for ata id validity
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Booting Linux bzImage on x86_64
  • From: "Viktor Stark" <abraar@xxxxxxx>
• [PATCH v2 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 2/2] arm/cpu: Avoid multiple definitions of barebox_arm_entry
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] ARM: Add support for semihosting
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: memtest updates
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• Re: [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/9] of_path: add of_find_path_by_node()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Kevin Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] state: backend_raw: add hamc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/9] of_path: add of_find_path_by_node()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: memtest updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Kevin Du Huanpeng <u74147@xxxxxxxxx>
• Re: memtest updates
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• Re: memtest updates
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• Re: memtest updates
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• Re: [PATCH v2] ARM: imx6: add OF fixup to delete nonexistent CPU cores
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Make list of flash images and fix link all single image cases
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] loadb: add missing brackets in help
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: imx6: add OF fixup to delete nonexistent CPU cores
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx6: add OF fixup to delete nonexistent CPU cores
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx6: add OF fixup to delete nonexistent CPU cores
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: add wandboard support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: i.MX6dl: dts: include arm/imx6dl.dtsi from board files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: Allow compressed dtb binaries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/9] memtest: Make output more compact
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/9] memtest: move error handling to end of function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/9] rework remap_range
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/9] memtest: split tests in separate functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/9] memtest: Make comments single line when appropriate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/9] memtest: move request/release regions to common/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/9] memtest: By default only test biggest region
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 9/9] memtest: Make cached/uncached test configurable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• memtest updates
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/9] memtest: move ctrlc check / progress showing into separate function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: Eltec-hypercam: Add missing dcdofd in flash header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] Make list of flash images and fix link all single image cases
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 3/3] amba: check if on remove callback
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• [PATCH 1/3] loadb: add missing brackets in help
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• [PATCH 2/3] checkpatch: fix left brace warning
  • From: Alexander Aring <alex.aring@xxxxxxxxx>
• [PATCH] ARM: imx6: add OF fixup to delete nonexistent CPU cores
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] imx6-mmdc: restore RALAT/WALAT in MMDC0, not MMDC1
  • From: Eric Nelson <eric@xxxxxxxxxx>
• Re: [PATCH] ARM: imx: clocksource: add new DT compatible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] imx6-mmdc: fix automatic power down enable in write level calibration
  • From: Eric Nelson <eric@xxxxxxxxxx>
• [PATCH] ARM: imx: clocksource: add new DT compatible
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] of_dump: Add option to print node names only
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! commands: clk_dump: use COMMAND_SUCCESS instead of 0 return code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] imx6-mmdc: restore RALAT/WALAT in MMDC0, not MMDC1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] imx6-mmdc: fix automatic power down enable in write level calibration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [vedio] support no-ascii fonts?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 7/9] crypto: add simple keystore
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 9/9] state: backend_raw: add hamc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 8/9] state: prepare raw backend for hmac support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 5/9] state: disable load command
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 1/9] of_path: of_find_path() factor out device detection logic into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 4/9] state: use name of device node as name if alias is not available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 3/9] state: make use of of_find_path_by_node() and add return -EPROBE_DEFER if device is not available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 6/9] crypto: Kconfig: add submenu for crypto related config options
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 0/8] state framework enhancements
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 2/9] of_path: add of_find_path_by_node()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] lib:font:fbconsole: add custom font support for review
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] imx6-mmdc: restore RALAT/WALAT in MMDC0, not MMDC1
  • From: Eric Nelson <eric@xxxxxxxxxx>
• [PATCH] imx6-mmdc: fix automatic power down enable in write level calibration
  • From: Eric Nelson <eric@xxxxxxxxxx>
• Re: [PATCH 4/6] crypto: add i.MX6 CAAM support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] crypto: add i.MX6 CAAM support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [vedio] support no-ascii fonts?
  • From: Kevin Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH 1/2] kbuild: fix DTC-native include path for dts/ directory
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] kbuild: fix DTC-native include path for dts/ directory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! commands: clk_dump: use COMMAND_SUCCESS instead of 0 return code
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 1/2] kbuild: fix DTC-native include path for dts/ directory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] misc clk-related changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] net: eth: Refactor OF tree fixup of one node into new function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] clock.h: include <types.h> under guard macro
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 3/3] commands: clk_dump: use COMMAND_SUCCESS instead of 0 return code
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/3] commands: add clk_get_rate command
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/3] misc clk-related changes
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [Question] device-tree-rebasing include path
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 2/2] kbuild: Don't assume dts files live in arch/*/boot/dts
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 1/2] kbuild: fix DTC-native include path for dts/ directory
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 2/2 v2] net: eth: Fixup OF tree with registered MAC addresses too
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH 1/2 v2] net: eth: Refactor OF tree fixup of one node into new function
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] state: backend_raw: add hamc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] state: backend_raw: add hamc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Add support for semihosting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] state: backend_raw: add hamc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] of_path: of_find_path() factor out device detection logic into separate function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eth: Fixup OF tree with registered MAC addresses too
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Add support for semihosting
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] net: eth: Fixup OF tree with registered MAC addresses too
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] Make barebox flashable image link for "multi-image" targets
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2 8/8] state: backend_raw: add hamc support
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• [PATCH v2 4/8] state: use name of device node as name if alias is not available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/8] of_path: of_find_path() factor out device detection logic into separate function
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/8] of_path: add of_find_path_by_phandle()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 6/8] crypto: add simple keystore
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/8] state framework enhancements
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 5/8] state: disable load command
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 8/8] state: backend_raw: add hamc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/8] state: make use of of_find_path_by_phandle() and add return -EPROBE_DEFER if device is not available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 7/8] state: prepare raw backend for hmac support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• In flash vs compiled environment for omap, rasp-pi, socfpga
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Add support for semihosting
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/6] state: prepare raw backend for hmac support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/6] state: return -EPROBE_DEFER if the backend isn't available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/6] state: disable load command
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/6] state
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/6] crypto: add simple keystore
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/6] state: backend_raw: add hamc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/6] state: use name of device node as name, if alias is not available
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Add support for semihosting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Add support for semihosting
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] crypto: add i.MX6 CAAM support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: Add support for semihosting
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 0/2] usb: core: return -EAGAIN on usb_* functions reentrance
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: mvebu: Lenovo IX4 300D: Fix pblb generation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [no subject]
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] scripts/kwbimage: Move configfile opening to the function that reads it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] scripts/kwbimage: Make BINARY files relative to config file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] crypto: add i.MX6 CAAM support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] usb: core: return -EAGAIN on usb_* functions reentrance
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] crypto: add i.MX6 CAAM support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 6/6] crypto: caam: add blob_gen driver
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/6] include: linux: add circular buffers
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/6] lib: add base64 helpers
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/6] ARM: imx6qdl: add caam clks
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 5/6] ARM: i.MX6qdl: add caam node
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] input: usb-kbd: depend on CONSOLE_FULL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] input: usb_kbd: skip poll on -EAGAIN error
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 2/2] usb: core: return -EAGAIN on usb_* functions reentrance
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 0/2] usb: core: return -EAGAIN on usb_* functions reentrance
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 1/3] input: usb-kbd: depend on CONSOLE_FULL
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] video: simple-panel: depend on OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] mtd: nand_denali: don't include arch header
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v1 resend] fixup! detect_fs: use device instead of file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v1 resend] fixup! detect_fs: use device instead of file
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: l2x0: correct indentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] fs: devfs: Allow mount path in cdev_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fcntl: Fix O_CREAT clashing with O_RWSIZE_8
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] fs: devfs: Allow mount path in cdev_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] fs: devfs: Allow mounting only on /dev/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] fs: pass path directly to cdev_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• devfs fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] filetype: Use cdev_open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1] fixup! detect_fs: use device instead of file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Franck Jullien <franck.jullien@xxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/4] ARM: l2x0: move outer cache flush on disable to user
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: imx6: set shared attribute override bit in PL310
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: l2x0: correct indentation
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: imx6: use l2x0 header for register definitions
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v1] fixup! detect_fs: use device instead of file
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 00/17] Armada 370/XP NAND driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Beaglebone black issue loading booting kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] memtest.c: Print iterations count if -i is 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/8] arm/cpu/start.c: Distil some common code in __start().
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] arm/cpu: Avoid multiple definitions of barebox_arm_entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Beaglebone black issue loading booting kernel
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Beaglebone black issue loading booting kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 11/17] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: mvneta: add Armada XP compatible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: mvebu: Add corediv clock driver for Armada 370/XP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 7/8] common/parser.c: Do not conflate error reporting disciplines
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/8] freescale-mx6-sabresd: Add CONFIG_DEBUG_LL support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/8] arm/cpu/start.c: Distil some common code in __start().
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/8] arm: Disable unaligned accesses
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/8] common/command.c: Replace magic number with appropriate constant
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/8] arm/cpu: Avoid multiple definitions of barebox_arm_entry
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 8/8] common/parser.c: Do not treat zero return code as error
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/8] memtest.c: Print iterations count if -i is 0
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Beaglebone black issue loading booting kernel
  • From: Mathieu Tétreault <mathieu.alexandre.tetreault@xxxxxxxxx>
• Re: [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 16/17] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 06/17] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 04/17] arm: pxa: Remove pxa_get_nandclk()
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 02/17] mtd: nand_mrvl_nfc: Use common clock for core clock
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] fixup! detect_fs: use device instead of file
  • From: Vicente <vicencb@xxxxxxxxx>
• Re: [PATCH] fixup! detect_fs: use device instead of file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] fixup! detect_fs: use device instead of file
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! detect_fs: use device instead of file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/17] mtd: nand_mrvl_nfc: Add support for NDCB3 register
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 14/17] mtd: nand_mrvl_nfc: Add support for HW BCH ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 17/17] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 07/17] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 10/17] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 12/17] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 16/17] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 09/17] mtd: nand_mrvl_nfc: Get ecc parameters from DT
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 01/17] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 02/17] mtd: nand_mrvl_nfc: Use common clock for core clock
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 11/17] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 13/17] mtd: nand_mrvl_nfc: Add support for 8bit BCH HW ECC
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 06/17] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 05/17] mtd: nand_mrvl_nfc: Remove keep_config
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 04/17] arm: pxa: Remove pxa_get_nandclk()
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 08/17] mtd: nand_mrvl_nfc: Fix num-cs property parsing
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 03/17] mtd: nand: Clarify Marvell Orion Kconfig prompt
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH 00/17] Armada 370/XP NAND driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] net: mvneta: add Armada XP compatible
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] fs: Fix memcpy_sz for remaining count/rwsize
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [PATCH] clk: mvebu: Add corediv clock driver for Armada 370/XP
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• [RFC] common: filetype: is_fat_or_mbr() considered harmful
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] fixup! detect_fs: use device instead of file
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH 4/5] usb: ehci-hcd: use mdelay_non_inerruptible()
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] param: dev_add_param_mac() depends on CONFIG_NET
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] param: dev_add_param_mac() depends on CONFIG_NET
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• v2015.10.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] spi: i.MX: optimize transfers for ECSPI v2.3
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] param: dev_add_param_mac() depends on CONFIG_NET
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mci: core: Increase clock for SD highspeed mode
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] param: dev_add_param_mac() depends on CONFIG_NET
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: core: drop unnecessary le16_to_cpu() conversion
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: core: drop unnecessary le16_to_cpu() conversion
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] commands: ls: use 14 digits for filesize
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] second version for "be more flexible when searching for second stage"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] at91sam9x5: for ROM base address (bugfix for nand ECC)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: booting kernel from ubi volume in nand flash
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! common: clock: introduce mdelay_non_interruptible()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] commands: ls: use 14 digits for filesize
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/2] detect_fs: use device instead of file
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 2/2] xload: be more flexible when searching for second stage bootloader.
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 0/2] second version for "be more flexible when searching for second stage"
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [PATCH] at91sam9x5: for ROM base address (bugfix for nand ECC)
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] at91sam9x5: for ROM base address (bugfix for nand ECC)
  • From: Alessandro Rubini <rubini-list@xxxxxxxxx>
• [PATCH] at91sam9x5: for ROM base address (bugfix for nand ECC)
  • From: Alessandro Rubini <rubini@xxxxxxxxx>
• booting kernel from ubi volume in nand flash
  • From: Geoff Cleary <gcleary1@xxxxxxxxxxxxxx>
• [PATCH] fixup! common: clock: introduce mdelay_non_interruptible()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] fs: syntax fix in ramfs.c
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] video: imx-hdmi: Remove unused 'regmap' structure
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: imx-hdmi: Remove unused 'regmap' structure
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: vj <vicencb@xxxxxxxxx>
• Re: boards: phytec-som-am335x: ethernet broken after reset
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• [PATCH] fs: syntax fix in ramfs.c
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: vj <vicencb@xxxxxxxxx>
• Re: [PATCH] arm: Disable unaligned access if MMU is switched off
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: boards: phytec-som-am335x: ethernet broken after reset
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: dts: am335x-phytec-phycore-som: Disable mac node.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: Disable unaligned access if MMU is switched off
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] eukrea-cpuimx25: fix boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/5] input: add usb keyboard driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ubiformat: remove dead code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ArchosG9 updates.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] net: dhcp: Fix CONFIG variable name
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH 1/3] ARM: dts: am335x-phytec-phycore-som: Disable mac node.
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH 2/3] ARM: am33xx: Enable ethernet node on NET boot
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH] xload: be more flexible when searching for second stage bootloader.
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 2/2] arm/cpu/start.c: Avoid copying device-tree when possible
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/2] arm/cpu/start.c: Distil some common code in __start().
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/3] archosg9: Use defaultenv-2-menu
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 1/3] archosg9: re-generate defconfigs with "make savedefconfig"
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 3/3] archosg9: add display
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 0/3] ArchosG9 updates.
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH 6/6] eukrea-cpuimx25: update defconfig
  • From: Eric Bénard <eric@xxxxxxxxxx>
• [PATCH 5/6] eukrea-cpuimx25: enable dfu sequence conditionaly
  • From: Eric Bénard <eric@xxxxxxxxxx>
• [PATCH 4/6] eukrea-cpuimx25: setup usb through chipidea-imx driver
  • From: Eric Bénard <eric@xxxxxxxxxx>
• [PATCH 2/6] chipidea-imx: allow phymode configuration in pdata
  • From: Eric Bénard <eric@xxxxxxxxxx>
• [PATCH 1/6] eukrea-cpuimx25: fix boot
  • From: Eric Bénard <eric@xxxxxxxxxx>
• [PATCH 3/6] imx25: register usb-misc by default
  • From: Eric Bénard <eric@xxxxxxxxxx>
• Re: [PATCH] console: use int rather than uint in printf() and friends
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v7 5/5] input: port usb keyboard driver from the u-boot
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>