Hi Andrey, I had to port the LM75 driver to barebox just a few days ago and so came up with exactly the same patch 2/7 and 3/7. I applied 1-3 right away. In my case I not only have a LM75 but also a PT100 connected to a Microchip MCP3421 which in Linux is abstracted as a IIO device. IIO has the advantage that it's more formalized and has it's own device tree binding that allows to connect sensor devices with their consumers. I picked some of the pieces from IIO and created something I called iodevice. I'll post it in the next few days. One thing I am missing in your approach is the readout of values as device parameters so that the values can be evaluated in scripts. On the other hand you have a command that allows to show the values of all sensors which I currently don't have. Maybe we can distil the best of both approaches. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
