Add a clock with clk_add_physbase for the NAND flash controller on
Zylonite board.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Tested-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
---
arch/arm/boards/zylonite/board.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boards/zylonite/board.c b/arch/arm/boards/zylonite/board.c
index 2caadbcecc37..2ff08b79345f 100644
--- a/arch/arm/boards/zylonite/board.c
+++ b/arch/arm/boards/zylonite/board.c
@@ -28,6 +28,8 @@
#include <net/smc91111.h>
#include <platform_data/mtd-nand-mrvl.h>
#include <pwm.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/sizes.h>
#include <mach/devices.h>
@@ -60,11 +62,16 @@ static mfp_cfg_t pxa310_mfp_cfg[] = {
static int zylonite_devices_init(void)
{
+ struct clk *clk;
+
armlinux_set_architecture(MACH_TYPE_ZYLONITE);
pxa_add_uart((void *)0x40100000, 0);
add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL,
0x14000300, 0x100000, IORESOURCE_MEM,
&smsc91x_pdata);
+ clk = clk_get_sys("nand", NULL);
+ if (!IS_ERR(clk))
+ clkdev_add_physbase(clk, 0x43100000, NULL);
add_generic_device("mrvl_nand", DEVICE_ID_DYNAMIC, NULL,
0x43100000, 0x1000, IORESOURCE_MEM, &nand_pdata);
devfs_add_partition("nand0", SZ_1M, SZ_256K, DEVFS_PARTITION_FIXED,
--
2.1.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
