Linux Wireless

• Thread Index

• [PATCH v5 4/8] ath11k: extend peer_assoc_cmd for 6GHz band
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v5 6/8] ath11k: Add 6G scan dwell time parameter in scan request command
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v5 0/8] add 6GHz radio support in ath11k driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] ath10k: use new taint_firmware_crashed()
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] mt76: add missing lock configuring coverage class
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] Revert "ath: add support for special 0x0 regulatory domain"
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5] nl80211: S1G band and channel definitions
  • From: Thomas Pedersen <thomas@xxxxxxxxxxxx>
• Re: [PATCH 1/5] brcmfmac: To fix kernel crash on out of boundary access
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 2/2] mac80211: 20TU unsolicited bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH 1/2] nl80211: Unsolicited bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH 0/2] Unsolicited bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] nl80211: Add FILS discovery support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] mac80211: Add FILS discovery support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add FILS discovery support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] nl80211: vendor-cmd: qca: add dynamic SAR power limits
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• [PATCH] ath11k: build HE 6 GHz capability
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH v3 11/11] ath11k: build HE 6 GHz capability
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] nl80211: S1G band and channel definitions
  • From: Thomas Pedersen <thomas@xxxxxxxxxxxx>
• Re: [PATCH v4 06/11] thermal: Add mode helpers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 11/11] thermal: Rename set_mode() to change_mode()
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 07/11] thermal: Use mode helpers in drivers
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: "Peter Kästle" <peter@xxxxxxxx>
• Re: [PATCH v4 06/11] thermal: Add mode helpers
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] Stop monitoring disabled devices
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 00/11] Stop monitoring disabled devices
  • From: "Peter Kästle" <peter@xxxxxxxx>
• [PATCH] mt76: overwrite qid for non-bufferable mgmt frames
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 5/5] brcmfmac: To fix Bss Info flag definition Bug
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• [PATCH 4/5] brcmfmac: reduce maximum station interface from 2 to 1 in RSDB mode
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• [PATCH 3/5] brcmfmac: keep SDIO watchdog running when console_interval is non-zero
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• [PATCH 2/5] brcmfmac: fix invliad permanent MAC address in wiphy
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• [PATCH 1/5] brcmfmac: To fix kernel crash on out of boundary access
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• [PATCH 0/5] brcmfmac: Stability change series
  • From: Wright Feng <wright.feng@xxxxxxxxxxx>
• Re: [PATCH v4 5/8] ath11k: set psc channel flag when sending channel list to firmware.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [mac80211-next:master] BUILD SUCCESS 093a48d2aa4b74db3134b61d7b7a061dbe79177b
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [wireless-drivers-next:master] BUILD SUCCESS e948ed0427991d197c861fcac4961e699b978d5d
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [wireless-drivers-next:pending] BUILD SUCCESS e43a73265a172b1b6a6769189a198947c7cedca7
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: Un-recoverable ath10k 4019 NIC lockup.
  • From: Adrian Chadd <adrian@xxxxxxxxxxx>
• Re: [PATCH v4 5/8] ath11k: set psc channel flag when sending channel list to firmware.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: pull-request: mac80211-next 2020-05-31
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v4 6/8] ath11k: Add 6G scan dwell time parameter in scan request command
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 8/8] ath11k: Add support for 6g scan hint
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 4/8] ath11k: extend peer_assoc_cmd for 6GHz band
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 0/8] add 6GHz radio support in ath11k driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 5/8] ath11k: set psc channel flag when sending channel list to firmware.
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 1/8] ath11k: add 6G frequency list supported by driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] ath11k: Use freq instead of channel number in rx path
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 2/8] ath11k: add support for 6GHz radio in driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v4 7/8] ath11k: Send multiple scan_chan_list messages if required
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• rt2800usb: Low Tx throughput
  • From: rt5572@xxxxxxxxxxx
• pull-request: mac80211-next 2020-05-31
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: pull-request: wireless-drivers-next-2020-05-30
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] mt76: mt7615: fix hw queue mapping
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] mt76: mt7615: fix lmac queue debugsfs entry
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] mt76: usb: rely on mt76_for_each_q_rx
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] mt76: mt7615: re-enable offloading of sequence number assignment
  • From: Felix Fietkau <nbd@xxxxxxxx>
• pull-request: wireless-drivers-next-2020-05-30
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ath11k: clear DCM max constellation tx value
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath11k: reset trigger frame MAC padding duration
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Remove ath10k_qmi_register_service_notifier() declaration
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ath9k: Set RX filter based to allow broadcast Action frame RX
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• European Mobility Expo 2020 Attendees List
  • From: "Rachel Lee" <rachel@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: wireless: mt76: add power-limits node
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: wireless: mt76: add power-limits node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: pull-request: iwlwifi-next 2020-05-29
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: pull request: mt76 2019-05-22
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STA
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mwifiex: Parse all API_VER_ID properties
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3] airo: Fix read overflows sending packets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STA
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/5] brcmfmac: set F2 blocksize for 4373
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wlcore_irq_locked
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: 8822c: remove CCK TX setting when switch channel
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: 8822c: fix missing brace warning for old compilers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] rtw88: coex: 8723d: set antanna control owner
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in __wl1271_op_remove_interface
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_op_suspend
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wlcore_regdomain_config
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_tx_work
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH] ath10k: Avoid override CE5 configuration for QCA99X0 chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [PATCH] mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STA
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] atmel: Use shared constant for rfc1042 header
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] libertas: Use shared constant for rfc1042 header
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] cw1200: Remove local sdio VENDOR and DEVICE id definitions
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] b43: Fix connection problem with WPA3
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "rtw88: no need to set registers for SDIO"
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: update qtnfmac maintainers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: pull request: mt76 2019-05-22
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 1/3] dt-bindings: net: wireless: mt76: add power-limits node
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 2/3] mt76: add functions for parsing rate power limits from DT
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH 3/3] mt76: mt7615: implement support for using DT rate power limits
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 06/11] thermal: Add mode helpers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] rt2800: enable MFP support unconditionally
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ath10k: Avoid override CE5 configuration for QCA99X0 chipsets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] rtw88: 8822c: fix missing brace warning for old compilers
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] mt76: mt7915: remove set but not used variable 'msta'
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] staging: wfx: introduce nl80211 vendor extensions
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx>
• Re: [PATCH v4 03/11] thermal: Add current mode to thermal zone device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 01/11] acpi: thermal: Fix error handling in the register function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] ath11k: Add peer max mpdu parameter in peer assoc command
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ath11k: add 802.3 undecap support to fix TKIP MIC error reporting
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx>
• Re: pull request: mt76 2019-05-22
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx>
• [PATCH 2/2] staging: wfx: drop useless loop
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 1/2] staging: wfx: fix AC priority
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH v2] staging: wfx: fix coherency of hif_scan() prototype
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx>
• [PATCH] cfg80211: fix 6 GHz frequencies to kHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2] cfg80211: adapt to new channelization of the 6GHz band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH V2] cfg80211: adapt to new channelization of the 6GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH V2] cfg80211: adapt to new channelization of the 6GHz band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Pali Rohár <pali@xxxxxxxxxx>
• RE: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• Re: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Pali Rohár <pali@xxxxxxxxxx>
• RE: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• Re: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Pali Rohár <pali@xxxxxxxxxx>
• RE: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• Re: [PATCH] cfg80211: adapt to new channelization of the 6GHz band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH] cfg80211: adapt to new channelization of the 6GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] cfg80211: adapt to new channelization of the 6GHz band
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH v2 20/24] cfg80211: Update 6 GHz starting frequency
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• pull-request: iwlwifi-next 2020-05-29
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH] rtw88: RTL8822C: update firmware version to v9.9
  • From: <yhchuang@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] rtw88: 8723d: follow up fixes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] rtw88: 8821c: add phy calibration
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 10/11] iwlwifi: mvm: add support for range request version 10
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 11/11] iwlwifi: bump FW API to 56 for AX devices
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 08/11] iwlwifi: move txq-specific from trans_pcie to common trans
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 09/11] iwlwifi: mvm: fix aux station leak
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 07/11] iwlwifi: move iwl_txq and substructures to a common trans header
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 06/11] iwlwifi: pcie: gen3: indicate 8k/12k RB size to device
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 05/11] iwlwifi: acpi: evaluate dsm to enable 5.2 bands in Indonesia
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 04/11] iwlwifi: acpi: support device specific method (DSM)
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 03/11] iwlwifi: pcie: keep trans instead of trans_pcie in iwl_txq
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 02/11] iwlwifi: pcie: don't count on the FW to set persistence mode
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 01/11] iwlwifi: set NO_HE if the regulatory domain forbids it
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH 00/11] iwlwifi: updates intended for v5.8 2020-05-08-2
  • From: Luca Coelho <luca@xxxxxxxxx>
• RE: [PATCH 7/7] rtw88: 8821c: add phy calibration
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• RE: [PATCH 5/7] rtw88: 8821c: add query rx desc support
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH V2 5/5] brcmfmac: 43012 Update MES Watermark
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH V2 2/5] brcmfmac: fix 4339 CRC error under SDIO 3.0 SDR104 mode
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH V2 1/5] brcmfmac: set F2 blocksize for 4373
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH V2 4/5] brcmfmac: fix 43455 CRC error under SDIO 3.0 SDR104 mode
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH V2 3/5] brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIO
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH V2 0/5] brcmfmac: SDIO parameter change series
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• RE: [EXT] Re: [PATCH] mwifiex: Parse all API_VER_ID properties
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• RE: [EXT] [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• [PATCH v2 0/3] rtw88: 8723d: follow up fixes
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 1/3] rtw88: coex: 8723d: set antanna control owner
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 3/3] rtw88: fix EAPOL 4-way failure by finish IQK earlier
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 2/3] rtw88: coex: 8723d: handle BT inquiry cases
  • From: <yhchuang@xxxxxxxxxxx>
• RE: [PATCH 0/3] rtw88: 8723d: follow up fixes
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH v2] ath11k: clear DCM max constellation tx value
  • From: Muna Sinada <msinada@xxxxxxxxxxxxxx>
• [PATCH] ath11k: reset trigger frame MAC padding duration
  • From: Muna Sinada <msinada@xxxxxxxxxxxxxx>
• [PATCH] nl80211: Add HE UL MU fixed rate setting
  • From: Muna Sinada <msinada@xxxxxxxxxxxxxx>
• Re: [PATCH v2 20/24] cfg80211: Update 6 GHz starting frequency
  • From: Jouni Malinen <j@xxxxx>
• [PATCH] wireless-regdb: update regulatory rules for Egypt (EG)
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• [PATCH v2 14/24] mac80211: check the correct bit for EMA AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 17/24] cfg80211: treat 6 GHz channels as valid regardless of capability
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 22/24] mac80211: Consider 6 GHz band when handling power constraint
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 15/24] mac80211: use HE 6 GHz band capability and pass it to the driver
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 21/24] mac80211: accept aggregation sessions on 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 18/24] cfg80211: reject HT/VHT capabilities on 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 19/24] cfg80211: require HE capabilities for 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 23/24] mac80211: set short_slot for 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 16/24] mac80211: Add HE 6GHz capabilities element to probe request
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 11/24] mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 13/24] mac80211: determine chandef from HE 6 GHz operation
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 12/24] mac80211: avoid using ext NSS high BW if not supported
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 24/24] nl80211/cfg80211: support 6 GHz scanning
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 20/24] cfg80211: Update 6 GHz starting frequency
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 01/24] nl80211: really allow client-only BIGTK support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 08/24] cfg80211: add and expose HE 6 GHz band capabilities
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 09/24] mac80211: add HE 6 GHz Band Capability element
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 06/24] cfg80211: handle 6 GHz capability of new station
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 07/24] mac80211: add HE 6 GHz Band Capabilities into parse extension
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 10/24] mac80211: build HE operation with 6 GHz oper information
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 02/24] cfg80211: add a helper to identify 6 GHz PSCs
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 05/24] ieee80211: add HE ext EIDs and 6 GHz capability defines
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 03/24] ieee80211: definitions for reduced neighbor reports
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2 04/24] ieee80211: add code to obtain and parse 6 GHz operation field
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] ath10k: Remove ath10k_qmi_register_service_notifier() declaration
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 08/11] thermal: Explicitly enable non-changing thermal zone devices
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 07/11] thermal: Use mode helpers in drivers
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 05/11] thermal: remove get_mode() operation of drivers
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 01/11] acpi: thermal: Fix error handling in the register function
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH] cfg80211: support bigger kek/kck key length
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 11/11] thermal: Rename set_mode() to change_mode()
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 09/11] thermal: core: Stop polling DISABLED thermal devices
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 06/11] thermal: Add mode helpers
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 03/11] thermal: Add current mode to thermal zone device
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• [PATCH v4 00/11] Stop monitoring disabled devices
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: "Bruno Dantas" <wireless@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] nl80211/cfg80211: support 6 GHz scanning
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: "Bruno Dantas" <wireless@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: 8822c: fix missing brace warning for old compilers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 12/24] mac80211: avoid using ext NSS high BW if not supported
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 12/24] mac80211: avoid using ext NSS high BW if not supported
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: "Bruno Dantas" <wireless@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/24] nl80211: really allow client-only BIGTK support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlist scanning: how to exclude old scan results from output?
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH 7/7] rtw88: 8821c: add phy calibration
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 6/7] rtw88: 8821c: add false alarm statistics
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 5/7] rtw88: 8821c: add query rx desc support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• pull request: mt76 2019-05-22
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH v3] airo: Fix read overflows sending packets
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• iwlist scanning: how to exclude old scan results from output?
  • From: "Bruno Dantas" <dantas@xxxxxxxxxxx>
• Re: [PATCH 4/7] rtw88: 8821c: add set channel support
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v2] nl80211/cfg80211: support 6 GHz scanning
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Potential IBSS race
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] rtw88: 8821c: add dig related settings
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/7] rtw88: 8821c: add set tx power index
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] rtw88: 8821c: add basic functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 15/24] mac80211: use HE 6 GHz band capability and pass it to the driver
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 20/24] cfg80211: Update 6GHz starting frequency
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 23/24] mac80211: set short_slot for 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 12/24] mac80211: avoid using ext NSS high BW if not supported
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 16/24] mac80211: Add HE 6GHz capabilities element to probe request
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 17/24] cfg80211: treat 6 GHz channels as valid regardless of capability
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 18/24] cfg80211: reject HT/VHT capabilities on 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 22/24] mac80211: Consider 6 GHz band when handling power constraint
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 21/24] mac80211: accept aggregation sessions on 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 14/24] mac80211: check the correct bit for EMA AP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 24/24] nl80211/cfg80211: support 6 GHz scanning
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 11/24] mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 13/24] mac80211: determine chandef from HE 6 GHz operation
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 19/24] cfg80211: require HE capabilities for 6 GHz band
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlwifi: 8265: unexpected LLC packets TX'ed in monitor mode
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 08/24] cfg80211: add and expose HE 6 GHz band capabilities
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 01/24] nl80211: really allow client-only BIGTK support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 06/24] cfg80211: handle 6 GHz capability of new station
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 10/24] mac80211: build HE operation with 6 GHz oper information
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 07/24] mac80211: add HE 6 GHz Band Capabilities into parse extension
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 09/24] mac80211: add HE 6 GHz Band Capability element
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 04/24] ieee80211: add code to obtain and parse 6 GHz operation field
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 05/24] ieee80211: add HE ext EIDs and 6 GHz capability defines
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 02/24] cfg80211: add a helper to identify 6 GHz PSCs
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 03/24] ieee80211: definitions for reduced neighbor reports
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlwifi: 8265: unexpected LLC packets TX'ed in monitor mode
  • From: "Marco" <marco@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] airo: Fix read overflows sending packets
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH 0/3] rtw88: 8723d: follow up fixes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] rtw88: fix EAPOL 4-way failure by finish IQK earlier
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v3 06/11] mac80211: handle HE 6 GHz Capability in HE STA processing
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC 08/10] mac80211: add HE 6 GHz Band Capability element
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH 02/11] mmc: sdio: Change macro names for Marvell 8688 modules
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• RE: [EXT] [PATCH 03/11] mmc: sdio: Move SDIO IDs from mwifiex driver to common include file
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• RE: [EXT] [PATCH 04/11] mmc: sdio: Move SDIO IDs from btmrvl driver to common include file
  • From: Ganapathi Bhat <ganapathi.bhat@xxxxxxx>
• Re: [PATCH v3 07/11] mac80211: add HE 6 GHz Band Capability IE in Assoc. Request
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "ath: add support for special 0x0 regulatory domain"
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [EXT] mwifiex: Firmware name for W8997 sdio wifi chip
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] mwifiex: Parse all API_VER_ID properties
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to common include file
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC PATCH v2] mac80211: build HE operation with 6 GHz oper information
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 04/10] ieee80211: add HE ext EIDs and 6 GHz capability defines
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 06/10] mac80211: add HE 6 GHz Band Capabilities into parse extension
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 08/10] mac80211: add HE 6 GHz Band Capability element
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 07/10] cfg80211: add and expose HE 6 GHz band capabilities
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 10/10] mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 09/10] mac80211: build HE operation with 6 GHz oper information
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 05/10] cfg80211: handle 6 GHz capability of new station
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 02/10] ieee80211: definitions for reduced neighbor reports
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 03/10] ieee80211: add code to obtain and parse 6 GHz operation field
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [RFC 01/10] cfg80211: add a helper to identify 6 GHz PSCs
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] mac80211: handle HE 6 GHz Capability in HE STA processing
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] nl80211: add missing comment on beacon prot
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iw: update nl80211.h
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] nl80211: add missing comment on beacon prot
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] nl80211: add missing comment on beacon prot
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• [PATCH 1/2] iw: update nl80211.h
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• [PATCH 2/2] iw: print current ext feature set
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] mac80211: handle HE 6 GHz Capability in HE STA processing
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] rtw88: single rf path chips don't support TX STBC
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 5/5] rtw88: 8821c: Add 8821CE to Kconfig and Makefile
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 2/5] rtw88: 8821c: add power tracking
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 0/5] rtw88: 8821c: the rest patches to support 8821c
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 3/5] rtw88: 8821c: add beamformee support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH 1/5] rtw88: 8821c: add cck pd settings
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 5/7] rtw88: 8821c: add query rx desc support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 1/7] rtw88: 8821c: add basic functions
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 2/7] rtw88: 8821c: add set tx power index
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 0/7] rtw88: 8821c: add basic function routines
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 4/7] rtw88: 8821c: add set channel support
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 7/7] rtw88: 8821c: add phy calibration
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 6/7] rtw88: 8821c: add false alarm statistics
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH v2 3/7] rtw88: 8821c: add dig related settings
  • From: <yhchuang@xxxxxxxxxxx>
• [PATCH] mt76: mt7615: Use kmemdup in mt7615_queue_key_update()
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] mt76: mt7915: remove set but not used variable 'msta'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v3 01/11] cfg80211: use only HE capability to set prohibited flags in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] cfg80211: use only HE capability to set prohibited flags in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] cfg80211: Add helper function to identify 6GHz PSC channel
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/11] cfg80211: handle 6 GHz capability of new station
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" references
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] cfg80211: Add helper function to identify 6GHz PSC channel
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Auth/Assoc/Connect events coming before CMD_CONNECT response (hwsim)
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Potential IBSS race
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [mac80211-next:master] BUILD SUCCESS 119aadf816f5373dc82ca4109d6d5b777e00475b
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 01/11] cfg80211: use only HE capability to set prohibited flags in 6 GHz
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/11] cfg80211: handle 6 GHz capability of new station
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: Potential IBSS race
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• Re: Auth/Assoc/Connect events coming before CMD_CONNECT response (hwsim)
  • From: James Prestwood <prestwoj@xxxxxxxxx>
• [mac80211-next:master 2177/2199] net/ethtool/cabletest.c:230:5: warning: no previous prototype for function 'ethnl_act_cable_test_tdr_cfg'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [mac80211-next:master 2177/2199] net/ethtool/cabletest.c:230:5: warning: no previous prototype for 'ethnl_act_cable_test_tdr_cfg'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• ax200 crashed and did not recover, firmware 48.4fa0041f.0
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability
  • From: Ramon Fontes <ramonreisfontes@xxxxxxxxx>
• Un-recoverable ath10k 4019 NIC lockup.
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v3] airo: Fix read overflows sending packets
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH v2] airo: Fix read overflows sending packets
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [PATCH v2] airo: Fix read overflows sending packets
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 03/11] nl80211: add HE 6 GHz Band Capability support
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] b43: Fix connection problem with WPA3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/2] b43_legacy: Fix connection problem with WPA3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] Revert "ath: add support for special 0x0 regulatory domain"
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [PATCH resend] airo: Fix read overflow in mpi_send_packet()
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• [mac80211-next:master 2177/2199] net/ethtool/cabletest.c:230:5: sparse: sparse: symbol 'ethnl_act_cable_test_tdr_cfg' was not declared. Should it be static?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH mac80211-next] net: ethtool: ethnl_act_cable_test_tdr_cfg() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v3] nl80211: add control port tx status method
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH v2] nl80211: add control port tx status method
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] b43_legacy: Fix connection problem with WPA3
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH v2] nl80211: add control port tx status method
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 06/11] mac80211: handle HE 6 GHz Capability in HE STA processing
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/11] mac80211: determine chantype from HE operation in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] nl80211: add control port tx status method
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH v3 07/11] mac80211: add HE 6 GHz Band Capability IE in Assoc. Request
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] nl80211: add control port tx status method
  • From: Markus Theil <markus.theil@xxxxxxxxxxxxx>
• Re: [PATCH v3 08/11] mac80211: build HE operation with 6 GHz oper information
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/11] mac80211: fix memory overlap due to variable length param
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 04/11] mac80211: add HE 6 GHz Band Capabilities into parse extension
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] nl80211: add HE 6 GHz Band Capability support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] wireless: Use linux/stddef.h instead of stddef.h
  • From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
• Re: [PATCH v3 02/11] cfg80211: handle 6 GHz capability of new station
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 01/11] cfg80211: use only HE capability to set prohibited flags in 6 GHz
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] [wireless-next] mt75: fix enum type mismatch
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH resend] airo: Fix read overflow in mpi_send_packet()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 00/10] staging: wfx: introduce nl80211 vendor extensions
  • From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
• [PATCH v3 8/8] qed: use new taint_firmware_crashed()
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 7/8] liquidio: use new taint_firmware_crashed()
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v3 6/8] bnxt_en: use new taint_firmware_crashed()
  • From: Michael Chan <michael.chan@xxxxxxxxxxxx>
• [PATCH v3 6/8] bnxt_en: use new taint_firmware_crashed()
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 4/8] panic: make taint data type clearer
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 3/8] taint: add firmware crash taint support
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 2/8] panic: add uevent support
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 1/8] kernel.h: move taint and system state flags to uapi
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• [PATCH v3 0/8] kernel: taint when the driver firmware crashes
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH 2/2] b43_legacy: Fix connection problem with WPA3
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] b43: Fix connection problem with WPA3
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/10] staging: wfx: introduce nl80211 vendor extensions
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH 2/2] staging: vt6656: Move vnt_tx_usb_header to vnt_tx_context
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 1/2] staging: vt6656: vnt_tx_packet use skb_clone to preserve sk_buff.
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] staging: wfx: introduce nl80211 vendor extensions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: pull request: mt76 2019-05-22
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: pull-request: mac80211-next next-2020-04-25
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v3 8/9] ath11k: Send multiple scan_chan_list messages if required
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 9/9] ath11k: Add support for 6g scan hint
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 1/9] cfg80211: Add helper function to identify 6GHz PSC channel
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 6/9] ath11k: set psc channel flag when sending channel list to firmware.
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 0/9] add 6GHz radio support in ath11k driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 3/9] ath11k: add support for 6GHz radio in driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 2/9] ath11k: add 6G frequency list supported by driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 5/9] ath11k: extend peer_assoc_cmd for 6GHz band
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 7/9] ath11k: Add 6G scan dwell time parameter in scan request command
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v3 4/9] ath11k: Use freq instead of channel number in rx path
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [PATCH] wireless: Use linux/stddef.h instead of stddef.h
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 00/10] staging: wfx: introduce nl80211 vendor extensions
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 01/10] staging: wfx: drop unused variable
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 03/10] staging: wfx: drop unused function wfx_pending_requeue()
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 04/10] staging: wfx: add support for tx_power_loop
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 02/10] staging: wfx: do not declare variables inside loops
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 06/10] staging: wfx: split wfx_get_ps_timeout() from wfx_update_pm()
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 05/10] staging: wfx: retrieve the PS status from the vif
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 10/10] staging: wfx: allow to run nl80211 vendor commands with 'iw'
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 09/10] staging: wfx: allow to set PTA settings
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 08/10] staging: wfx: allow to burn prevent rollback bit
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• [PATCH 07/10] staging: wfx: add support for set/get ps_timeout
  • From: Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx>
• Re: [PATCH] cfg80211: propagate iftype HE 6 GHz capability
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• [PATCH 2/2] b43_legacy: Fix connection problem with WPA3
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 1/2] b43: Fix connection problem with WPA3
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 0/2] Fix WPA3 problems with b43 and b43_legacy
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] ath10k: Avoid override CE5 configuration for QCA99X0 chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• [PATCH v3 5/8] ath10k: use new taint_firmware_crashed()
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: vt6656: Fix vnt_tx_usb_header static checker warning
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/3] nl80211: add control port tx status method
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] nl80211/mac80211: add tx status for ctrl port
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/3] nl80211: add support for setting fixed HE rate/gi/ltf
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] nl80211: S1G band and channel definitions
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [wireless-regdb] Request for Update regulatory rules for Egypt (EG)
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] mac80211: enable TKIP when using encapsulation offloading
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] nl80211: fix PORT_AUTHORIZED wording to reflect behavior
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Auth/Assoc/Connect events coming before CMD_CONNECT response (hwsim)
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] mac80211: fix HT-Control field reception for management frames
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability
  • From: Ramon Fontes <ramonreisfontes@xxxxxxxxx>
• Re: Regarding .wake_tx_queue() model
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH] mac80211: allow SA-QUERY processing in userspace
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• Re: [PATCH] cfg80211: propagate iftype HE 6 GHz capability
  • From: Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx>
• [PATCH] cfg80211: propagate iftype HE 6 GHz capability
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxx>
• Re: pull-request: mac80211 2020-05-25
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: pull-request: wireless-drivers-next-2020-05-25
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v2 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] mac80211: FILS disc/bcast probe resp config
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] FILS discovery and bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• [PATCH] mac80211: do not iterate active interfaces when in re-configure
  • From: greearb@xxxxxxxxxxxxxxx
• Re: [PATCH] rtw88: add debugfs to fix tx rate
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: mac80211 spam and deadlock on OpenWrt
  • From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [PATCH v2] rt2800: enable MFP support unconditionally
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• pull-request: mac80211-next next-2020-04-25
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• pull-request: mac80211 2020-05-25
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH v2] rt2800: enable MFP support unconditionally
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH] rt2800: enable MFP support unconditionally
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• [PATCH] rt2800: enable MFP support unconditionally
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH 1/6] iwlwifi: use thermal_zone_device_update() for temperature change
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [PATCH] ath10k: add SDIO firmware for QCA9377 WiFi
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• pull-request: wireless-drivers-next-2020-05-25
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH] cfg80211: fix debugfs rename crash
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [PATCH 07/11] mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 03/11] mmc: sdio: Move SDIO IDs from mwifiex driver to common include file
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH -next] mt76: mt7915: Fix build error
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Regarding .wake_tx_queue() model
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Potential IBSS race
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH] cfg80211: fix debugfs rename crash
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] wireless: Use linux/stddef.h instead of stddef.h
  • From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: mac80211 spam and deadlock on OpenWrt
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: iwlwifi: 8265: unexpected LLC packets TX'ed in monitor mode
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sven Eckelmann <sven@xxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] rtw88: add debugfs to fix tx rate
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] nl80211: fix p2p go mgmt send failure on DFS channel
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mac80211: Fix station dump inactive time after sta connection
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [PATCH 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to common include file
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] iwlwifi: use thermal_zone_device_update() for temperature change
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] ath10k: add SDIO firmware for QCA9377 WiFi
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• RE: [PATCH] Revert "rtw88: no need to set registers for SDIO"
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [wireless-drivers-next:master] BUILD SUCCESS 472f0a240250df443ffc4f39835e829916193ca1
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] mt76: only iterate over initialized rx queues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: only iterate over initialized rx queues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH] mt76: only iterate over initialized rx queues
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: only iterate over initialized rx queues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH v2] mt76: mt7615: add support for MT7611N
  • From: Alexander Schlichte <schlichte.alexander@xxxxxxxxx>
• [PATCH] ath10k: add SDIO firmware for QCA9377 WiFi
  • From: Christian Hewitt <christianshewitt@xxxxxxxxx>
• Re: [PATCH] mt76: only iterate over initialized rx queues
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: fix BUG: spinlock bad magic in mt76_dma_init
  • From: Felix Fietkau <nbd@xxxxxxxx>
• [PATCH] mt76: only iterate over initialized rx queues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Stanislaw Gruszka <stf_xl@xxxxx>
• [PATCH] mt76: fix BUG: spinlock bad magic in mt76_dma_init
  • From: <sean.wang@xxxxxxxxxxxx>
• [RFC PATCH] rt2800lib: unconditionally enable MFP
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• [PATCH v2] mt76: mt7615: add support for MT7611N
  • From: DENG Qingfang <dqfext@xxxxxxxxx>
• [PATCH] staging: vt6656: Fix vnt_tx_usb_header static checker warning
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH] atmel: Use shared constant for rfc1042 header
  • From: Pascal Terjan <pterjan@xxxxxxxxxx>
• [PATCH] libertas: Use shared constant for rfc1042 header
  • From: Pascal Terjan <pterjan@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH] mt76: fix wcid allocation issues
  • From: Felix Fietkau <nbd@xxxxxxxx>
• RE: [kbuild-all] Re: [linux-next:master 2957/8703] drivers/net/wireless/realtek/rtw88/rtw8822c.c:1039:2: warning: missing braces around initializer
  • From: "Sang, Oliver" <oliver.sang@xxxxxxxxx>
• Re: [PATCH] mt76: mt7915: Use proper enum type in __mt7915_mcu_msg_send
  • From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
• [PATCH] mt76: mt7915: Use proper enum type in __mt7915_mcu_msg_send
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in ath9k_hif_usb_rx_cb
  • From: syzbot <syzbot+c15a0a825788b6ba2bc4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Steve deRosier <derosier@xxxxxxxxx>
• [PATCH 0/2] FILS discovery and bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH 2/2] mac80211: FILS disc/bcast probe resp config
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• [PATCH 1/2] nl80211: FILS discovery/bcast probe resp support
  • From: Aloka Dixit <alokad@xxxxxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• (No Subject)
  • From: hyperfekt <linux-wireless@xxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wlcore_irq_locked
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH] mac80211: mesh: fix discovery timer re-arming issue / crash
  • From: Linus Lüssing <linus.luessing@xxxxxxxxx>
• Re: [PATCH 05/11] mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH 04/11] mmc: sdio: Move SDIO IDs from btmrvl driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 11/11] mmc: sdio: Sort all SDIO IDs in common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 08/11] mmc: sdio: Move SDIO IDs from ath10k driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 10/11] mmc: sdio: Fix Cypress SDIO IDs macros in common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 09/11] mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 07/11] mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 06/11] mmc: sdio: Move SDIO IDs from smssdio driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 05/11] mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 03/11] mmc: sdio: Move SDIO IDs from mwifiex driver to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 02/11] mmc: sdio: Change macro names for Marvell 8688 modules
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to common include file
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• pull request: mt76 2019-05-22
  • From: Felix Fietkau <nbd@xxxxxxxx>
• Re: [PATCH -next] mt76: mt7915: Fix build error
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH -next] mt76: mt7915: Fix build error
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH 0/5] brcmfmac: SDIO parameter change series
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• Re: [PATCH 0/5] brcmfmac: SDIO parameter change series
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] ath9k: release allocated buffer if timed out
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "rtw88: no need to set registers for SDIO"
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] brcmfmac: SoftAP creation and dcmd buffer size changes
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Michael Büsch <m@xxxxxxx>
• Re: [PATCH -next] mt76: mt7915: Fix build error
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] rtw88: 8822c: remove CCK TX setting when switch channel
  • From: <yhchuang@xxxxxxxxxxx>
• Re: [PATCH] mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phy
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phy
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phy
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] mt76: mt7915: fix possible NULL pointer dereference in mt7915_register_ext_phy
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 0/9] add 6GHz radio support in ath11k driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 9/9] ath11k: Add support for 6g scan hint
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 4/9] ath11k: Use freq instead of channel number in rx path
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 3/9] ath11k: add support for 6GHz radio in driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 2/9] ath11k: add 6G frequency list supported by driver
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 8/9] ath11k: Send multiple scan_chan_list messages if required
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 7/9] ath11k: Add 6G scan dwell time parameter in scan request command
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 6/9] ath11k: set psc channel flag when sending channel list to firmware.
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH v2 5/9] ath11k: extend peer_assoc_cmd for 6GHz band
  • From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
• [PATCH] mt76: mt7615: fix hw_scan with ssid_type for specified SSID only
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 12/15] ath10k: use new module_firmware_crashed()
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [RFC 1/2] devlink: add simple fw crash helpers
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH v2 12/15] ath10k: use new module_firmware_crashed()
  • From: Emmanuel Grumbach <egrumbach@xxxxxxxxx>
• [PATCH] wlcore: fix runtime pm imbalance in wlcore_irq_locked
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] rtw88: 8822c: fix missing brace warning for old compilers
  • From: <yhchuang@xxxxxxxxxxx>
• RE: [kbuild-all] Re: [linux-next:master 2957/8703] drivers/net/wireless/realtek/rtw88/rtw8822c.c:1039:2: warning: missing braces around initializer
  • From: Tony Chuang <yhchuang@xxxxxxxxxxx>
• [PATCH -next] mt76: mt7915: Fix build error
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH 0/3] rtw88: 8723d: follow up fixes
  • From: You-Sheng Yang <vicamo.yang@xxxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• [PATCH] wireless: Use linux/stddef.h instead of stddef.h
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [PATCH v2 12/15] ath10k: use new module_firmware_crashed()
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [PATCH] iwlwifi: Replace zero-length array with flexible-array
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_op_suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• [PATCH 3/3] ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" references
  • From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
• [PATCH 1/3] ath11k: vdev delete synchronization with firmware
  • From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
• [PATCH 2/3] ath11k: peer delete synchronization with firmware
  • From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
• [PATCH 0/3] ath11k: vdev and peer delete synchronization with firmware
  • From: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
• [PATCH] mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STA
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH] mwifiex: Parse all API_VER_ID properties
  • From: Pali Rohár <pali@xxxxxxxxxx>
• RE: [kbuild-all] Re: [linux-next:master 2957/8703] drivers/net/wireless/realtek/rtw88/rtw8822c.c:1039:2: warning: missing braces around initializer
  • From: "Sang, Oliver" <oliver.sang@xxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Michael Büsch <m@xxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Michael Büsch <m@xxxxxxx>
• [PATCH 10/10] staging: vt6656: move key frag controls to vnt_fill_txkey
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 09/10] staging: vt6656: Move calling point of vnt_fill_txkey.
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 08/10] staging: vt6656: Move tx_key inside vnt_fill_txkey.
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 07/10] staging: vt6656: move tx_body_size/payload_len to skb->len
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 06/10] staging: vt6656: Move key_buffer inside vnt_fill_txkey.
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 05/10] staging: vt6656: rxtx use ieee80211_tx_info for rts/cts control
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 04/10] staging: vt6656: use ieee80211_tx_info to replace need_mic
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 03/10] staging: vt6656: Move vnt_mic_hdr pointers to vnt_fill_txkey
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 02/10] staging: vt6656: rxtx remove unused need_ack
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• [PATCH 01/10] staging: vt6656: remove ieee80211_hdr from vnt_usb_send_context.
  • From: Malcolm Priestley <tvboxspy@xxxxxxxxx>
• Re: [PATCH 3/4] brcmfmac: set net carrier on via test tool for AP mode
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_op_suspend
  • From: dinghao.liu@xxxxxxxxxx
• [PATCH 3/5] brcmfmac: set F2 blocksize and watermark for 4354/4356 SDIO
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH 5/5] brcmfmac: 43012 Update MES Watermark
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH 4/5] brcmfmac: fix 43455 CRC error under SDIO 3.0 SDR104 mode
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH 2/5] brcmfmac: fix 4339 CRC error under SDIO 3.0 SDR104 mode
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH 1/5] brcmfmac: set F2 blocksize for 4373
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH 0/5] brcmfmac: SDIO parameter change series
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• Request for Update regulatory rules for Egypt (EG)
  • From: Ahmed Kamal <email.ahmedkamal@xxxxxxxxxxxxxx>
• Re: [PATCH] ath9k: release allocated buffer if timed out
  • From: Brian Norris <briannorris@xxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [OpenWrt-Devel] [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Vincent Wiemann <vincent.wiemann@xxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_tx_work
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wlcore_regdomain_config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in __wl1271_op_remove_interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] wlcore: fix runtime pm imbalance in wl1271_op_suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] ath10k : Fix channel survey dump
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: update qtnfmac maintainers
  • From: Sergey Matyukevich <sergey.matyukevich.os@xxxxxxxxxxxxx>
• [PATCH] wlcore: fix runtime pm imbalance in __wl1271_op_remove_interface
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] wlcore: fix runtime pm imbalance in wlcore_regdomain_config
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH] wlcore: fix runtime pm imbalance in wl1271_tx_work
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: iwlwifi firmware loading problems, rk3399
  • From: Emmanuel Grumbach <egrumbach@xxxxxxxxx>
• Re: [OpenWrt-Devel] [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Sebastian Gottschall <s.gottschall@xxxxxxxxxx>
• [PATCH] wlcore: fix runtime pm imbalance in wl1271_op_suspend
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [PATCH 4/4] brcmfmac: increase dcmd maximum buffer size
  • From: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
• [PATCH] cw1200: Remove local sdio VENDOR and DEVICE id definitions
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: iwlwifi firmware loading problems, rk3399
  • From: Mika Penttilä <mika.penttila@xxxxxxxxxxxx>
• Re: iwlwifi firmware loading problems, rk3399
  • From: Emmanuel Grumbach <egrumbach@xxxxxxxxx>
• [bug report] mt76: mt7915: fix possible deadlock in mt7915_stop
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] mt76: add mac80211 driver for MT7915 PCIe-based chipsets
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] mt76: adjust wcid size to support new 802.11ax generation
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] mt76: mt7915: fix locking bug in mt7915_sta_rc_update()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] mt76: add mac80211 driver for MT7915 PCIe-based chipsets
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [BUG?] b43: can't connect to WPA3 network (nohwcrypt=1)
  • From: Rui Salvaterra <rsalvaterra@xxxxxxxxx>
• Re: [OpenWrt-Devel] [PATCH v13] ath10k: add LED and GPIO controlling support for various chipsets
  • From: Vincent Wiemann <vincent.wiemann@xxxxxxxxxx>
• [PATCH] iw: Print limit for maximum associated stations in AP mode
  • From: Pali Rohár <pali@xxxxxxxxxx>