Search Linux Wireless

[PATCH v3 5/9] ath11k: extend peer_assoc_cmd for 6GHz band

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds support required for configuring min_data_rate of 6GHz oper IE
and peer_he_caps_6ghz in peer assoc command. The Minimum Rate field
indicates the minimum rate, in units of 1 Mb/s, that the non-AP STA is
allowed to use for sending PPDUs as defined in IEEE P802.11ax™/D6.0.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 2 ++
 drivers/net/wireless/ath/ath11k/wmi.h | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 500108fa59d9..a6bbb3badd1f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1789,6 +1789,7 @@ int ath11k_wmi_send_peer_assoc_cmd(struct ath11k *ar,
 	cmd->peer_he_cap_info = param->peer_he_cap_macinfo[0];
 	cmd->peer_he_cap_info_ext = param->peer_he_cap_macinfo[1];
 	cmd->peer_he_cap_info_internal = param->peer_he_cap_macinfo_internal;
+	cmd->peer_he_caps_6ghz = param->peer_he_caps_6ghz;
 	cmd->peer_he_ops = param->peer_he_ops;
 	memcpy(&cmd->peer_he_cap_phy, &param->peer_he_cap_phyinfo,
 	       sizeof(param->peer_he_cap_phyinfo));
@@ -1842,6 +1843,7 @@ int ath11k_wmi_send_peer_assoc_cmd(struct ath11k *ar,
 
 	/* HE Rates */
 	cmd->peer_he_mcs = param->peer_he_mcs_count;
+	cmd->min_data_rate = param->min_data_rate;
 
 	ptr += sizeof(*mcs);
 
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index afa3c4cf90e9..fd82cff7537b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -1011,6 +1011,7 @@ enum wmi_tlv_vdev_param {
 	WMI_VDEV_PARAM_FILS_MAX_CHANNEL_GUARD_TIME,
 	WMI_VDEV_PARAM_BA_MODE = 0x7e,
 	WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE = 0x87,
+	WMI_VDEV_PARAM_6GHZ_PARAMS = 0x99,
 	WMI_VDEV_PARAM_PROTOTYPE = 0x8000,
 	WMI_VDEV_PARAM_BSS_COLOR,
 	WMI_VDEV_PARAM_SET_HEMU_MODE,
@@ -3444,6 +3445,7 @@ struct peer_assoc_params {
 	u32 tx_max_rate;
 	u32 tx_mcs_set;
 	u8 vht_capable;
+	u8 min_data_rate;
 	u32 tx_max_mcs_nss;
 	u32 peer_bw_rxnss_override;
 	bool is_pmf_enabled;
@@ -3472,6 +3474,7 @@ struct peer_assoc_params {
 	bool he_flag;
 	u32 peer_he_cap_macinfo[2];
 	u32 peer_he_cap_macinfo_internal;
+	u32 peer_he_caps_6ghz;
 	u32 peer_he_ops;
 	u32 peer_he_cap_phyinfo[WMI_HOST_MAX_HECAP_PHY_SIZE];
 	u32 peer_he_mcs_count;
@@ -3509,6 +3512,8 @@ struct  wmi_peer_assoc_complete_cmd {
 	u32 peer_he_mcs;
 	u32 peer_he_cap_info_ext;
 	u32 peer_he_cap_info_internal;
+	u32 min_data_rate;
+	u32 peer_he_caps_6ghz;
 } __packed;
 
 struct wmi_stop_scan_cmd {
-- 
2.17.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux