Hi Dave,
My apologies that this comes so late, it took me much longer than
I had anticipated to pull together the 6 GHz changes between the
overlaps that Qualcomm and we at Intel had, since we both had much
of this implemented, though with a bit different focus (AP/mesh
vs. client). But I think it's now fine, although I left out the
scanning for now since we're still discussing the userspace API.
Other than that, nothing really big, you can see the tag message
below.
Please pull and let me know if there's any problem.
Thanks,
johannes
The following changes since commit dc0f3ed1973f101508957b59e529e03da1349e09:
net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032 (2020-05-26 23:26:04 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git tags/mac80211-next-for-davem-2020-05-31
for you to fetch changes up to 093a48d2aa4b74db3134b61d7b7a061dbe79177b:
cfg80211: support bigger kek/kck key length (2020-05-31 11:27:24 +0200)
----------------------------------------------------------------
Another set of changes, including
* many 6 GHz changes, though it's not _quite_ complete
(I left out scanning for now, we're still discussing)
* allow userspace SA-query processing for operating channel
validation
* TX status for control port TX, for AP-side operation
* more per-STA/TID control options
* move to kHz for channels, for future S1G operation
* various other small changes
----------------------------------------------------------------
Arend Van Spriel (1):
cfg80211: adapt to new channelization of the 6GHz band
Gustavo A. R. Silva (2):
cfg80211: Replace zero-length array with flexible-array
mac80211: Replace zero-length array with flexible-array
Hauke Mehrtens (1):
wireless: Use linux/stddef.h instead of stddef.h
Ilan Peer (2):
mac80211: Add HE 6GHz capabilities element to probe request
mac80211: Consider 6 GHz band when handling power constraint
Johannes Berg (15):
mac80211: allow SA-QUERY processing in userspace
mac80211: fix HT-Control field reception for management frames
cfg80211: fix 6 GHz frequencies to kHz
nl80211: really allow client-only BIGTK support
cfg80211: add a helper to identify 6 GHz PSCs
ieee80211: add code to obtain and parse 6 GHz operation field
ieee80211: add HE ext EIDs and 6 GHz capability defines
cfg80211: add and expose HE 6 GHz band capabilities
mac80211: avoid using ext NSS high BW if not supported
mac80211: determine chandef from HE 6 GHz operation
mac80211: use HE 6 GHz band capability and pass it to the driver
cfg80211: treat 6 GHz channels as valid regardless of capability
cfg80211: reject HT/VHT capabilities on 6 GHz band
cfg80211: require HE capabilities for 6 GHz band
mac80211: accept aggregation sessions on 6 GHz
Markus Theil (2):
nl80211: add ability to report TX status for control port TX
mac80211: support control port TX status reporting
Nathan Errera (1):
cfg80211: support bigger kek/kck key length
Patrick Steinhardt (1):
cfg80211: fix CFG82011_CRDA_SUPPORT still mentioning internal regdb
Rajkumar Manoharan (5):
cfg80211: handle 6 GHz capability of new station
mac80211: add HE 6 GHz Band Capabilities into parse extension
mac80211: add HE 6 GHz Band Capability element
mac80211: build HE operation with 6 GHz oper information
mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode
Ramon Fontes (1):
mac80211_hwsim: report the WIPHY_FLAG_SUPPORTS_5_10_MHZ capability
Sergey Matyukevich (4):
cfg80211: fix mask type in cfg80211_tid_cfg structure
mac80211: fix variable names in TID config methods
cfg80211: add support for TID specific AMSDU configuration
nl80211: simplify peer specific TID configuration
Shaul Triebitz (1):
mac80211: check the correct bit for EMA AP
Tamizh Chelvam (2):
mac80211: Add new AMPDU factor macro for HE peer caps
nl80211: Add support to configure TID specific Tx rate configuration
Thomas Pedersen (4):
cfg80211: add KHz variants of frame RX API
nl80211: add KHz frequency offset for most wifi commands
nl80211: support scan frequencies in KHz
ieee80211: S1G defines
Tova Mussai (2):
ieee80211: definitions for reduced neighbor reports
mac80211: set short_slot for 6 GHz band
drivers/net/wireless/mac80211_hwsim.c | 1 +
include/linux/ieee80211.h | 344 +++++++++++++++++++++++++++++++++-
include/net/cfg80211.h | 169 ++++++++++++++---
include/net/mac80211.h | 14 +-
include/uapi/linux/nl80211.h | 126 ++++++++++---
include/uapi/linux/wireless.h | 6 +-
net/mac80211/agg-rx.c | 5 +-
net/mac80211/agg-tx.c | 3 +-
net/mac80211/cfg.c | 13 +-
net/mac80211/driver-ops.h | 4 +-
net/mac80211/he.c | 48 +++++
net/mac80211/ibss.c | 11 +-
net/mac80211/ieee80211_i.h | 25 ++-
net/mac80211/main.c | 4 +
net/mac80211/mesh.c | 54 +++++-
net/mac80211/mesh.h | 2 +
net/mac80211/mesh_plink.c | 9 +-
net/mac80211/mlme.c | 120 ++++++++----
net/mac80211/rx.c | 105 ++++++++---
net/mac80211/scan.c | 23 ++-
net/mac80211/spectmgmt.c | 4 +-
net/mac80211/status.c | 9 +-
net/mac80211/tdls.c | 2 +-
net/mac80211/tx.c | 65 +++++--
net/mac80211/util.c | 298 +++++++++++++++++++++++++++--
net/wireless/Kconfig | 4 +-
net/wireless/chan.c | 22 ++-
net/wireless/core.c | 17 +-
net/wireless/core.h | 2 +-
net/wireless/mlme.c | 6 +-
net/wireless/nl80211.c | 297 ++++++++++++++++++++++-------
net/wireless/rdev-ops.h | 9 +-
net/wireless/sme.c | 7 +-
net/wireless/trace.h | 25 ++-
net/wireless/util.c | 10 +-
35 files changed, 1575 insertions(+), 288 deletions(-)
