Search Linux Wireless

Re: [PATCH] mt76: only iterate over initialized rx queues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-05-24 18:13, Lorenzo Bianconi wrote:
>> On 2020-05-24 15:45, Lorenzo Bianconi wrote:
>> >> Fixes the following reported crash:
>> >> 
>> >> [    2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456
>> >> [    2.361583]  lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
>> >> [    2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5
>> >> [    2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019
>> >> [    2.363343] Call Trace:
>> >> [    2.363552]  dump_stack+0x97/0xdb
>> >> [    2.363826]  ? spin_bug+0xa6/0xb3
>> >> [    2.364096]  do_raw_spin_lock+0x6a/0x9a
>> >> [    2.364417]  mt76_dma_rx_fill+0x44/0x1de [mt76]
>> >> [    2.364787]  ? mt76_dma_kick_queue+0x18/0x18 [mt76]
>> >> [    2.365184]  mt76_dma_init+0x53/0x85 [mt76]
>> >> [    2.365532]  mt7615_dma_init+0x3d7/0x546 [mt7615e]
>> >> [    2.365928]  mt7615_register_device+0xe6/0x1a0 [mt7615e]
>> >> [    2.366364]  mt7615_mmio_probe+0x14b/0x171 [mt7615e]
>> >> [    2.366771]  mt7615_pci_probe+0x118/0x13b [mt7615e]
>> >> [    2.367169]  pci_device_probe+0xaf/0x13d
>> >> [    2.367491]  driver_probe_device+0x284/0x2ca
>> >> [    2.367840]  __driver_attach+0x7a/0x9e
>> >> [    2.368146]  ? driver_attach+0x1f/0x1f
>> >> [    2.368451]  bus_for_each_dev+0xa0/0xdb
>> >> [    2.368765]  bus_add_driver+0x132/0x204
>> >> [    2.369078]  driver_register+0x8e/0xcd
>> >> [    2.369384]  do_one_initcall+0x160/0x257
>> >> [    2.369706]  ? 0xffffffffc0240000
>> >> [    2.369980]  do_init_module+0x60/0x1bb
>> >> [    2.370286]  load_module+0x18c2/0x1a2b
>> >> [    2.370596]  ? kernel_read_file+0x141/0x1b9
>> >> [    2.370937]  ? kernel_read_file_from_fd+0x46/0x71
>> >> [    2.371320]  SyS_finit_module+0xcc/0xf0
>> >> [    2.371636]  do_syscall_64+0x6b/0xf7
>> >> [    2.371930]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
>> >> [    2.372344] RIP: 0033:0x7da218ae4199
>> >> [    2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
>> >> [    2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199
>> >> [    2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006
>> >> [    2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540
>> >> [    2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000
>> >> [    2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000
>> >> 
>> >> Reported-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
>> >> Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue")
>> >> Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
>> > 
>> > Just a couple of nitpicks inline, for the rest:
>> > 
>> > Acked-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
>> > 
>> >> ---
>> >>  drivers/net/wireless/mediatek/mt76/debugfs.c      | 2 +-
>> >>  drivers/net/wireless/mediatek/mt76/dma.c          | 4 ++--
>> >>  drivers/net/wireless/mediatek/mt76/mt76.h         | 4 ++++
>> >>  drivers/net/wireless/mediatek/mt76/mt7603/mac.c   | 3 ++-
>> >>  drivers/net/wireless/mediatek/mt76/mt7615/mac.c   | 3 ++-
>> >>  drivers/net/wireless/mediatek/mt76/mt7615/pci.c   | 8 +++++---
>> >>  drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 3 ++-
>> >>  drivers/net/wireless/mediatek/mt76/mt7915/mac.c   | 3 ++-
>> >>  8 files changed, 20 insertions(+), 10 deletions(-)
>> >> 
>> >> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
>> >> index afb1ccf61b74..78378dcf430a 100644
>> >> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
>> >> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
>> >> @@ -671,6 +671,10 @@ static inline u16 mt76_rev(struct mt76_dev *dev)
>> >>  #define mt76_queue_tx_cleanup(dev, ...)	(dev)->mt76.queue_ops->tx_cleanup(&((dev)->mt76), __VA_ARGS__)
>> >>  #define mt76_queue_kick(dev, ...)	(dev)->mt76.queue_ops->kick(&((dev)->mt76), __VA_ARGS__)
>> >>  
>> >> +#define mt76_for_each_q_rx(dev, i)	\
>> >> +	for (i = 0; i < ARRAY_SIZE((dev)->q_rx) && \
>> >> +		    (dev)->q_rx[i].desc; i++)
> 
> reviewing the patch I guess this will not work for usb code since we do not
> allocate q_rx[].desc pointer there. I guess we can use q_rx[].ndesc instead
Thanks, I will send v2 with that change included.

- Felix



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux