Search Linux Wireless

[PATCH V2 1/5] brcmfmac: set F2 blocksize for 4373

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wright Feng <wright.feng@xxxxxxxxxxx>

Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having
UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value.

Signed-off-by: Wright Feng <wright.feng@xxxxxxxxxxx>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 14 +++++++++++++-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  4 ++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 22a17ae09e94..bb3196cba683 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -43,6 +43,7 @@
 
 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
+#define SDIO_4373_FUNC2_BLOCKSIZE	256
 #define SDIO_4359_FUNC2_BLOCKSIZE	256
 /* Maximum milliseconds to wait for F2 to come up */
 #define SDIO_WAIT_F2RDY	3000
@@ -910,13 +911,24 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 		sdio_release_host(sdiodev->func1);
 		goto out;
 	}
-	if (sdiodev->func2->device == SDIO_DEVICE_ID_BROADCOM_4359)
+	switch (sdiodev->func2->device) {
+	case SDIO_DEVICE_ID_CYPRESS_4373:
+		f2_blksz = SDIO_4373_FUNC2_BLOCKSIZE;
+		break;
+	case SDIO_DEVICE_ID_BROADCOM_4359:
 		f2_blksz = SDIO_4359_FUNC2_BLOCKSIZE;
+		break;
+	default:
+		break;
+	}
+
 	ret = sdio_set_block_size(sdiodev->func2, f2_blksz);
 	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
 		sdio_release_host(sdiodev->func1);
 		goto out;
+	} else {
+		brcmf_dbg(SDIO, "set F2 blocksize to %d\n", f2_blksz);
 	}
 
 	/* increase F2 timeout */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index ce6f15284277..dce22cd2279d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -41,6 +41,7 @@
 /* watermark expressed in number of words */
 #define DEFAULT_F2_WATERMARK    0x8
 #define CY_4373_F2_WATERMARK    0x40
+#define CY_4373_F1_MESBUSYCTRL  (CY_4373_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)
 #define CY_43012_F2_WATERMARK    0x60
 #define CY_4359_F2_WATERMARK	0x40
 #define CY_4359_F1_MESBUSYCTRL	(CY_4359_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)
@@ -4195,8 +4196,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
 			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
-					   CY_4373_F2_WATERMARK |
-					   SBSDIO_MESBUSYCTRL_ENAB, &err);
+					   CY_4373_F1_MESBUSYCTRL, &err);
 			break;
 		case SDIO_DEVICE_ID_CYPRESS_43012:
 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
-- 
2.25.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux