Search Linux Wireless

Re: [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi again,

W dniu 29.05.2020 o 18:08, Andrzej Pietrasiewicz pisze:
Hi Guenter,

W dniu 29.05.2020 o 17:42, Guenter Roeck pisze:
On Thu, May 28, 2020 at 09:20:44PM +0200, Andrzej Pietrasiewicz wrote:
Prepare for eliminating get_mode().

Might be worthwhile to explain (not only in the subject) what you are
doing here.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
---
  drivers/acpi/thermal.c                        | 18 ++++++----------
  .../ethernet/mellanox/mlxsw/core_thermal.c    | 21 +++++++------------
  drivers/platform/x86/acerhdf.c                | 15 ++++++-------
  drivers/thermal/da9062-thermal.c              |  6 ++----
  drivers/thermal/imx_thermal.c                 | 17 +++++++--------
  .../intel/int340x_thermal/int3400_thermal.c   | 12 +++--------
  .../thermal/intel/intel_quark_dts_thermal.c   | 16 +++++++-------
  drivers/thermal/thermal_of.c                  | 10 +++------

After this patch is applied on top of the thermal 'testing' branch,
there are still local instances of thermal_device_mode in
    drivers/thermal/st/stm_thermal.c
    drivers/thermal/ti-soc-thermal/ti-thermal-common.c

If there is a reason not to replace those, it might make sense to explain
it here.


My understanding is that these two are sensor devices which are "plugged"
into their "parent" thermal zone device. The latter is the "proper" tzd.
They both use thermal_zone_of_device_ops instead of thermal_zone_device_ops.
The former doesn't even have get_mode(). The thermal core, when it calls
get_mode(), operates on the "parent" thermal zone devices.

Consequently, the drivers you mention use their "mode" members for
their private purpose, not for the purpose of storing the "parent"
thermal zone device mode.


Let me also say it differently.

Both drivers which you mention use devm_thermal_zone_of_sensor_register().
It calls thermal_zone_of_sensor_register(), which "will search the list of
thermal zones described in device tree and look for the zone that refer to
the sensor device pointed by @dev->of_node as temperature providers. For
the zone pointing to the sensor node, the sensor will be added to the DT
thermal zone device." When a match is found thermal_zone_of_add_sensor()
is invoked, which (using thermal_zone_get_zone_by_name()) iterates over
all registered thermal_zone_devices. The one eventually found will be
returned and propagated to the original caller of
devm_thermal_zone_of_sensor_register(). The state of this returned
device is managed elsewhere (in that device's struct tzd). The "mode"
member you are referring to is thus unrelated.

Regards,

Andrzej



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux