Linux USB Users

• Thread Index

• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [RFC] xhci: add traces for debug messages in xhci_address_device()
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Re: [PATCH net-next] net/usb: add relative mii functions for r815x
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Toralf Förster <toralf.foerster@xxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] USB: remove redundant "#if"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: global suspend and remote wakeup don't mix
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: linux-next: Tree for Jul 11 (usb/chipidea)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [RFC] ux500 dma & short transfers on MUSB
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: Help adding trace events to xHCI
  • From: "Arend van Spriel" <arend@xxxxxxxxxxxx>
• Re: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage with hcd_urb_list_lock
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] ux500 dma & short transfers on MUSB
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage with hcd_urb_list_lock
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix value used in dwc2_set_all_params
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: Video corruption varies by system load
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Help adding trace events to xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] [RFC] usb: gadget: USB_GADGET should depend on HAS_DMA
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/50] USB: usblp: spin_lock in complete() cleanup
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 06/13] usb: chipidea: add otg_cap attribute for otg capable
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 44/50] sound: usb: caiaq: spin_lock in complete() cleanup
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 17/50] USB: serial: sierra: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 1/6] usb: dwc3: USB_DWC3 should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 5/6] usb: gadget: USB_MV_U3D should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 4/6] usb: gadget: USB_FOTG210_UDC should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 6/6] [RFC] usb: gadget: USB_GADGET should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/6] usb: chipidea: USB_CHIPIDEA_UDC should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 3/6] usb: gadget: USB_MV_UDC should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 08/50] USB: legousbtower: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 42/50] media: usb: tlg2300: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 44/50] sound: usb: caiaq: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 46/50] Sound: usb: ua101: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 17/50] USB: serial: sierra: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 08/50] USB: legousbtower: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 36/50] media: usb: em28xx: spin_lock in complete() cleanup
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [PATCH 08/50] USB: legousbtower: spin_lock in complete() cleanup
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] staging: dwc2: fix value used in dwc2_set_all_params
  • From: Julien Delacou <julien.delacou.st@xxxxxxxxx>
• Re: [PATCH 08/50] USB: legousbtower: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/50] USB: misc: uss720: spin_lock in complete() cleanup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Announcing libusbx-1.0.16 final
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 02/50] USB: cdc-wdm: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 03/50] USB: usblp: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 04/50] USB: adutux: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 05/50] USB: misc: uss720: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 06/50] USB: iowarrior: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• RE: question on skel_read func of usb_skeleton.c‏
  • From: WangChen <unicorn_wang@xxxxxxxxxxx>
• [PATCH 08/50] USB: legousbtower: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 09/50] USB: usbtest: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 10/50] USB: serial: cyberjack: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 11/50] USB: serial: digi_acceleportldusb: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 12/50] USB: serial: io_edgeport: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 13/50] USB: serial: io_ti: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 15/50] USB: serial: mos77840: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC] ux500 dma & short transfers on MUSB
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 18/50] USB: serial: symbolserial: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 19/50] USB: serial: ti_usb_3410_5052: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 22/50] BT: btusb: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 23/50] BT: bfusb: read_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 25/50] ISDN: hfcsusb: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 26/50] USBNET: cdc-phonet: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 27/50] USBNET: hso: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 29/50] USBNET: rtl8150: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 31/50] wireless: zd1211rw: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 32/50] wireless: ath: carl9170: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 33/50] wireless: libertas: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 34/50] wireless: libertas_tf: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 35/50] media: usb: cx231xx: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 36/50] media: usb: em28xx: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 37/50] media: usb: sn9x102: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 41/50] media: usb: em28xx: make sure irq disabled before acquiring lock
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 42/50] media: usb: tlg2300: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 43/50] sound: usb: midi: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 45/50] sound: usb: usx2y: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 46/50] Sound: usb: ua101: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 48/50] staging: bcm: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 50/50] staging: vt6656: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 49/50] staging: ced1401: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 47/50] staging: btmtk_usb: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 44/50] sound: usb: caiaq: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 40/50] media: dvb-core: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 39/50] media: usb: tm6000: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 38/50] media: usb: tlg2300: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 30/50] wireless: ath9k: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 28/50] USBNET: kaweth: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 24/50] input: cm109: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 21/50] hid: usbhid: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 20/50] USB: serial: usb_wwan: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 17/50] USB: serial: sierra: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 16/50] USB: serial: quatech2: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 14/50] USB: serial: mos7720: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 07/50] USB: ldusb: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 01/50] USB: devio: spin_lock in complete() cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 00/50] USB: cleanup spin_lock in URB->complete()
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Victor Yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb: gadget: fotg210-udc: Remove bogus __init/__exit annotations
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v12 02/13] usb: chipidea: imx: remove vbus regulator operation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v12 02/13] usb: chipidea: imx: remove vbus regulator operation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v12 13/13] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 11/13] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 08/13] usb: chipidea: move otg relate things to otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 09/13] usb: chipidea: add vbus interrupt handler
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 12/13] usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 05/13] usb: chipidea: Add role init and destory APIs
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 07/13] usb: chipidea: disable all interrupts and clear all interrupts status
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 06/13] usb: chipidea: add otg_cap attribute for otg capable
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 04/13] usb: chipidea: otg: Add otg file used to access otgsc
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 01/13] usb: chipidea: add vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 03/13] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 02/13] usb: chipidea: imx: remove vbus regulator operation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: class: move "checking 'actual'" code block into "checking 'buffer[1]'" code block
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: fotg210-udc: Remove bogus __init/__exit annotations
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: fotg210-udc: Remove bogus __init/__exit annotations
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: USB host support should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• [PATCH] option: add Olivetti Olicard 200
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] mfd: omap-usb-host: move initialization to module_init()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/6] mfd: omap-usb-host: Put pins in IDLE state on suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 5/6] USB: Support wakeup IRQ for suspended controllers
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 6/6] USB: ehci-omap: Implement suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/6] ARM: dts: omap3beagle-xm: Add idle state pins for USB host
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/6] USB: Implement runtime idling and remote wakeup for OMAP EHCI controller
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/6] ARM: OMAP3: Enable Hardware Save and Restore for USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: Edgeport 416 USB to serial convertor
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: Use usb_hcd_platform_shutdown() wherever possible
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] [RFC] usb: dwc3: using the maximum_speed to determine if the usb3 phy is needed
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Roger Quadros <rogerq@xxxxxx>
• Edgeport 416 USB to serial convertor
  • From: Brian Peters <brpeters@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] usb/gadget: Kconfig: Fix configfs-based RNDIS function build
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 2/2] [RFC] usb: dwc3: using the maximum_speed to determine if the usb3 phy is needed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] USB: host: Use usb_hcd_platform_shutdown() wherever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] chipidea: bits: Cast PORTSC_PTS and DEVLC_PTS macros
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: fix the build error with randconfig
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH] usb: phy: samsung-usb2: Toggle HSIC GPIO from device tree
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [xhci] null pointer dereference on ring_doorbell_for_active_rings
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/7] usb: phy: msm: Move mach depndend code to platform data
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 6/7] usb: phy: msm: Fix WARNING: Prefer seq_puts to seq_printf
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 5/7] usb: phy: msm: Fix WARNING: quoted string split across lines
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 0/7] usb: phy: msm: Fixes and cleanups
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 7/7] usb: phy: msm: Lindent the code
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 4/7] usb: phy: msm: Remove unnecessarily check for valid regulators.
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 3/7] usb: phy: msm: Move regulator usage to managed resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v2 2/7] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] USB: EHCI: Fix resume signalling on remote wakeup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] USB: host: Use usb_hcd_platform_shutdown() wherever possible
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: EHCI: Fix resume signalling on remote wakeup
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] USB: host: Use usb_hcd_platform_shutdown() wherever possible
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] usb: phy: omap-usb3: Improve DPLL parameter lookup code
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] USB: PHY: Make PHY driver selection possible by controller drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] USB: host: Use usb_hcd_platform_shutdown() wherever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: question on skel_read func of usb_skeleton.c‏
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: question on skel_read func of usb_skeleton.c‏
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: question on skel_read func of usb_skeleton.c‏
  • From: WangChen <unicorn_wang@xxxxxxxxxxx>
• RE: question on skel_read func of usb_skeleton.c‏
  • From: WangChen <unicorn_wang@xxxxxxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH] usb/gadget: Kconfig: Fix configfs-based RNDIS function build
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 1/1] usb/gadget: Kconfig: Fix configfs-based RNDIS function build
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 0/1] Fix for configfs-based RNDIS build
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: gadget: remove extra check on udc_stop
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Video corruption varies by system load
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 5/7] staging: usbip: set server port via option.
  • From: Anthony Foiani <tkil@xxxxxxxxx>
• Re: [PATCH 4/7] staging: usbip: add option for usbipd to save its process id.
  • From: Anthony Foiani <tkil@xxxxxxxxx>
• RE: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 01/01] Drivers: MMB and PI ZigBee USB Device Support in cp210x.c
  • From: Sami Rahman <sami.rahman@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [xhci] null pointer dereference on ring_doorbell_for_active_rings
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb/gadget: Kconfig: Fix configfs-based RNDIS function build
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: question on skel_read func of usb_skeleton.c‏
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• question on skel_read func of usb_skeleton.c‏
  • From: 汪辰 <unicorn_wang@xxxxxxxxxxx>
• Re: [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] musb: omap: Fix: pass all the resources to musb core
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 3/5] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/4] usb: musb: omap: use the new API to get PHY reference by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/4] usb: phy: add a new API to get PHY ref by label
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] musb: omap: Fix: pass all the resources to musb core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/5] usb: musb: dsps: enable dual instance support for am33xx platform
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 3/5] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 4/5] arm: dts: Add USB phy nodes for AM33XX
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 5/5] usb: musb: dsps: Remove the phy control from glue and add phy driver APIs
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH 0/5] Add phy support for AM335X platform using Generic PHy framework
  • From: George Cherian <george.cherian@xxxxxx>
• [PATCH] usb/gadget: Kconfig: Fix configfs-based RNDIS function build
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH] Urgent fix for configfs-based RNDIS build
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/2] usb: host: delete chipidea dependency
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: chipidea: kconfig: using USB_EHCI_HCD instead of USB for dependency
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] usb: gadget: s3c-hsotg: Allow driver instantiation using device tree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] jacinto6 : usb3_phy: Updated dpll M,N values.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/1] usb: chipidea: fix the build error with randconfig
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 4/7] staging: usbip: add option for usbipd to save its process id.
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 5/7] staging: usbip: set server port via option.
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 3/7] staging: usbip: improve error reporting
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 7/7] staging: usbip: fix up alignment in long options list
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 6/7] staging: usbip: properly handle "-l" / "--log" option
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 2/7] staging: usbip: use local variable while setting up socket
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 1/7] staging: usbip: clean up checkpatch warnings in usbipd.c
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• [PATCH 0/7] staging: usbip: features and a tiny fix
  • From: Anthony Foiani <anthony.foiani@xxxxxxxxx>
• Re: Detecting start/stop streaming for UVC webcam with bulk transfer mode
  • From: Chetan Nanda <chetannanda@xxxxxxxxx>
• [PATCH net-next] net/usb: add relative mii functions for r815x
  • From: Hayes Wang <hayeswang@xxxxxxxxxxx>
• Video corruption varies by system load
  • From: Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>
• RE: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: lsusb doesn't handle 32 bits Usage tags.
  • From: pchavent <Paul.Chavent@xxxxxxxx>
• Re: lsusb doesn't handle 32 bits Usage tags.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• lsusb doesn't handle 32 bits Usage tags.
  • From: pchavent <Paul.Chavent@xxxxxxxx>
• Re: [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Repeated disconnects of wired mouse
  • From: Larry Keegan <lk@xxxxxxxxxxxxxxx>
• Re: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage with hcd_urb_list_lock
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [xhci] corrupt urbs after module reload
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: Chipidea usb otg support for IMX/MXS (device functionality)
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] [RFC] usb: dwc3: using the maximum_speed to determine if the usb3 phy is needed
  • From: Nishanth Menon <nm@xxxxxx>
• Re: musb: dsps: make it work with two instances
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• Re: Repeated disconnects of wired mouse
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage with hcd_urb_list_lock
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: Repeated disconnects of wired mouse
  • From: Larry Keegan <lk@xxxxxxxxxxxxxxx>
• inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage with hcd_urb_list_lock
  • From: Maarten Lankhorst <m.b.lankhorst@xxxxxxxxx>
• Re: [PATCH 2/2] [RFC] usb: dwc3: using the maximum_speed to determine if the usb3 phy is needed
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Repeated disconnects of wired mouse
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] [RFC] usb: dwc3: using the maximum_speed to determine if the usb3 phy is needed
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• [PATCH 1/2] usb: dwc3: adapt to use dr_mode device tree helper
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [xhci] null pointer dereference on ring_doorbell_for_active_rings
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Announcing libusbx-1.0.16-rc3
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Why no USB id list in the kernel sources?
  • From: Michael Opdenacker <michael.opdenacker@xxxxxxxxxxxxxxxxxx>
• Re: Why no USB id list in the kernel sources?
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Repeated disconnects of wired mouse
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Why no USB id list in the kernel sources?
  • From: Michael Opdenacker <michael.opdenacker@xxxxxxxxxxxxxxxxxx>
• Re: How to enable hidraw driver for USB HID touchpad?
  • From: Bohdan Koval <koval.bogdan@xxxxxxxxx>
• [RFC v3] xhci: fix dma mask setup in xhci.c
  • From: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
• Repeated disconnects of wired mouse
  • From: Larry Keegan <lk@xxxxxxxxxxxxxxx>
• [RFC 1/2] usb/musb dma: add cppi41 dma driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC 2/2] temporary disable first instance
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC] cppi41 dma support for musb
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: [PATCH] [RFC] usb: dwc3: removal of assumption that usb3 phy always present
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH 1/1] net: add dm9620 net usb driver
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCH 4/5] usb: musb: dsps: use proper child nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/5] usb: musb: dsps: remove the hardcoded phy pieces
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/5] arm: dts: am33xx: add USB phy nodes
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/5] musb: musb: dsps: remove instances variable
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/5] usb: phy: phy-nop: add support for am335x PHY
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• musb: dsps: make it work with two instances
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] usb: common: introduce of_usb_get_maximum_speed()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/5] usb: common: introduce of_usb_get_maximum_speed()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/5] usb: common: introduce of_usb_get_maximum_speed()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/5] usb: common: introduce of_usb_get_maximum_speed()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/5] usb: common: introduce of_usb_get_maximum_speed()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb: phy: phy-nop: add support for am335x PHY
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: phy-nop: add support for am335x PHY
  • From: George Cherian <george.cherian@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Victor Yeo <victoryeo1974@xxxxxxxxx>
• RE: One USB mouse problem with runtime power management enabled
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: EHCI force full speed (chipidea ip) interrupt transfer
  • From: Rong Wang <wr011235813@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] Adding Manhattan Hi-Speed USB DVI Converter to sisusbvga
  • From: "Jóhann B. Guðmundsson" <johannbg@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: [PATCH 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: James Stone <jamesmstone@xxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [PATCH 2/2] USB: OHCI: make ohci-pxa27x a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH 1/2] USB: OHCI: make ohci-ep93xx a separate driver
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• [PATCH 0/2] USB: OHCI: more bus glues as separate modules
  • From: Manjunath Goudar <manjunath.goudar@xxxxxxxxxx>
• Re: [PATCH] usb: phy: phy-nop: add support for am335x PHY
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb: phy: phy-nop: add support for am335x PHY
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Sound Blaster USB X-Fi configuration problem
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Reinhard Max <max@xxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI force full speed (chipidea ip) interrupt transfer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: One USB mouse problem with runtime power management enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] Replace debug macro
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: webcams that work on ehci but don't work on xhci
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] usb: gadget: mv_u3d_core: fix to pass correct device identity to free_irq()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• device failing to enumerate with XHCI
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v2 5/5] staging: ozwpan: Rename Kbuild to Makefile
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] staging: ozwpan: Remove extra debug logs.
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH v2 0/5] Replace debug macro
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH v2 2/5] staging: ozwpan: Replace oz_trace with oz_dbg
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH v2 5/5] staging: ozwpan: Rename Kbuild to Makefile
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH v2 4/5] staging: ozwpan: Convert macro to function.
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• [PATCH v2 3/5] staging: ozwpan: Remove old debug macro.
  • From: Rupesh Gujare <rupesh.gujare@xxxxxxxxx>
• Re: [PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: One USB mouse problem with runtime power management enabled
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: omap4 ehci sporadic resume issue
  • From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: EHCI force full speed (chipidea ip) interrupt transfer
  • From: Rong Wang <wr011235813@xxxxxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb: phy: phy-mxs-usb: Check the return value from stmp_reset_block()
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH] [RFC] usb: dwc3: removal of assumption that usb3 phy always present
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• [PATCH] usb: dwc3: fix the error returned with usb3_phy failure
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• [PATCH] usb: phy: omap-usb3: fix dpll clock index
  • From: Ruchika Kharwar <ruchika@xxxxxx>
• Re: How to enable hidraw driver for USB HID touchpad?
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Detecting start/stop streaming for UVC webcam with bulk transfer mode
  • From: Sharma Bhupesh-B45370 <B45370@xxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Sound Blaster USB X-Fi configuration problem
  • From: Mariusz Grecki <mariusz.grecki@xxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Reinhard Max <max@xxxxxxx>
• How to enable hidraw driver for USB HID touchpad?
  • From: Bohdan Koval <koval.bogdan@xxxxxxxxx>
• [no subject]
  • From: Bohdan Koval <koval.bogdan@xxxxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: [PATCH 09/24] USB: pl2303: clean up baud-rate handling
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: Audio I/O parameters
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Detecting start/stop streaming for UVC webcam with bulk transfer mode
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Proposed modification to PL2303 driver
  • From: Reinhard Max <max@xxxxxxx>
• [PATCH] usb: phy: phy-mxs-usb: Check the return value from stmp_reset_block()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Toralf Förster <toralf.foerster@xxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Log spam from xhci_hcd
  • From: Paul Neumann <paul104x@xxxxxxxx>
• Re: [PATCH 1/3] USB: remove unneeded idr.h include
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to distinguish device classes which attached on port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Victor Yeo <victoryeo1974@xxxxxxxxx>
• Re: Section mismatch in drivers/usb/gadget/fotg210-udc.c
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: Section mismatch in drivers/usb/gadget/fotg210-udc.c
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: remove unneeded idr.h include
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: One USB mouse problem with runtime power management enabled
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: remove unneeded idr.h include
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: isp1362: move debug files from proc to debugfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 5/5] USB: EHCI: support running URB giveback in tasklet context
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v5 4/5] USB: EHCI: improve interrupt qh unlink
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v5 3/5] USB: EHCI: improve ehci_endpoint_disable
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v5 2/5] USB: URB documentation: claim complete() will be run with IRQs enabled
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v5 1/5] USB: HCD: support giveback of URB in tasklet context
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v5 0/5] USB: HCD/EHCI: giveback of URB in tasklet context
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/5] USB: EHCI: improve interrupt qh unlink
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] USB: isp1362: move debug files from proc to debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] USB: sl811: move debug files from proc to debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] USB: remove unneeded idr.h include
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Oliver Neukum <oneukum@xxxxxxx>
• autosuspend issues with the Intel Bluetooth device [8087:07dc]
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 09/24] USB: pl2303: clean up baud-rate handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• RE: [PATCH v9 0/8] Generic PHY Framework
  • From: "Patel, Satish" <satish.patel@xxxxxx>
• Re: [RFC PATCH 4/6] USB: ehci-omap: Suspend the controller during bus suspend
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Victor Yeo <victoryeo1974@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Victor Yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH 1/5] usb: dwc3: switch to GPL v2 only
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] net: add dm9620 net usb driver
  • From: "Joseph Chang" <joseph_chang@xxxxxxxxxxxxxx>
• [RFC/PATCH 2/2] usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: misc: EHSET Test Fixture device driver for host compliance
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• [PATCH 0/2] usb: Add support for EHSET
  • From: Jack Pham <jackp@xxxxxxxxxxxxxx>
• How to distinguish device classes which attached on port
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• One USB mouse problem with runtime power management enabled
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• RE: [PATCH 1/5] usb: dwc3: switch to GPL v2 only
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] staging: dwc2: fix thinko in dwc2_hc_set_even_odd_frame()
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: How should we handle isochronous underruns?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v4 4/5] USB: EHCI: improve interrupt qh unlink
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: dwc3: switch to GPL v2 only
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v2 0/3] changes from v1
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Hardware bug in Intel USB-2 hub?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/3] USB: isp1362: move debug files from proc to debugfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] USB: sl811: move debug files from proc to debugfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] USB: remove unneeded idr.h include
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/5] usb: dwc3: switch to GPL v2 only
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Regarding g_mass_storage.ko module configuration.
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>