Linux SoC
[Prev Page][Next Page]
- Re: [PATCH v4 1/3] thermal: qcom-spmi: Allow to disable stage 2 shutdown
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH] clk: fix apss cpu overclocking
- From: John Crispin <john@xxxxxxxxxxx>
- [PATCH] soc: qcom: spm: add SCM probe dependency
- From: John Crispin <john@xxxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/2] clk: qcom: Add camera clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: clock: Introduce QCOM Camera clock bindings
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 0/2] Add QCOM camera clock controller driver
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v5] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH v4] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v4] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH v8 0/7] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
- From: Andy Gross <andy.gross@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
- From: Andy Gross <andy.gross@xxxxxxxxxx>
- [RFC PATCH 4/4] clk: qcom: sdm845: Add Power Domain to RCGs and PLL
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [RFC PATCH 3/4] clk: qcom: Add prepare/unprepare clock ops for PLL/RCG
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [RFC PATCH 2/4] clk: qcom: Initialize the power domain class for each clock
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [RFC PATCH 1/4] clk: qcom: Add support to request power domain state
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [RFC PATCH 0/4] clk: qcom: Add support to vote to genpd
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V2] dt-bindings: soc: qcom: Add device tree binding for GENI SE
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 1/3] thermal: qcom-spmi: Allow to disable stage 2 shutdown
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH V2] dt-bindings: soc: qcom: Add device tree binding for GENI SE
- From: Dilip Kota <dkota@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH 2/3] dts: arm64/sdm845: Add node for qcom,smmu-v2
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH 0/3] Enable smmu support on sdm845
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH v2] arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
- From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
- [PATCH 5/6] drivers: qcom: rpmh-rsc: write PDC data
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 6/6] drivers: qcom: rpmh: write PDC data
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 4/6] drivers: qcom: rpmh-rsc: clear active mode configuration for waketcs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 3/6] drivers: qcom: rpmh: disallow active requests in solver mode
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 2/6] drivers: qcom: rpmh: export controller idle status
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 0/6] drivers/qcom: add additional functionality to RPMH
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH 1/7] drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH 1/7] drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: grahamr@xxxxxxxxxxxxxx
- [RFC PATCH 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [RFC PATCH 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH v2 1/1] dts: qcom: db820c: Add gpio-line-names property
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v8 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v8 4/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v8 0/7] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v4 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v4 3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v4 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v4 1/3] thermal: qcom-spmi: Allow to disable stage 2 shutdown
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH 0/2] qcom: remove memcpy()ing from cmd-db driver
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH 1/2] soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH 2/2] soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH v2 2/7] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 4/7] dt-bindings: trivial: remove tsl2772
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 5/7] iio: tsl2772: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 3/7] iio: tsl2772: add support for reading power settings from device tree
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 1/7] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 6/7] iio: tsl2772: add device tree binding for avago,apds9930
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 7/7] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH v2 0/7] ARM: dts: qcom: msm8974-hammerhead: add more sensors
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [v9] clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 1/3] arm: Convert arm boot_lock to raw
- From: Wei Xu <xuwei5@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] arm: Convert arm boot_lock to raw
- From: Patrice CHOTARD <patrice.chotard@xxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH] clk: qcom: Update SPDX headers for common files
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 2/2] clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 1/2] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 0/2] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] arm: Convert arm boot_lock to raw
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH] drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- [PATCH] drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: spanda@xxxxxxxxxxxxxx
- [PATCH v2 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 0/4] Add QCOM graphics clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v2 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v2 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v2 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
- From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
- Re: [PATCH 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH v7 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v7 3/7] arm64: dts: msm8996: thermal: Initialise via DT and add second controller
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v7 0/7] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH 1/3] arm: Convert arm boot_lock to raw
- From: Andreas Färber <afaerber@xxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
- [PATCH 1/3] arm: Convert arm boot_lock to raw
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH 3/3] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH 0/3] ARM: dts: qcom: msm8974-hammerhead: add support for mpu6515
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Pierre Le Magourou <lemagoup@xxxxxxxxx>
- Re: [PATCH v11 2/2] dt: qcom: Add qcom-cpufreq-kryo driver configuration
- From: Ilia Lin <ilia.lin@xxxxxxxxx>
- Re: [PATCH v11 2/2] dt: qcom: Add qcom-cpufreq-kryo driver configuration
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- Re: [PATCH 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
- From: Sean Paul <seanpaul@xxxxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
- From: Bhushan Shah <bshah@xxxxxxx>
- [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v6 0/7] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v4 0/6] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v5 3/7] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v5 0/7] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
- From: Bhushan Shah <bshah@xxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] clk: qcom: Add support for RCG to register for DFS
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 1/1] dts: qcom: db820c: Add gpio-line-names property
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 2/3] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 1/3] clk: qcom: Move frequency table macro to common file
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: Add lpass clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH] soc: qcom/llcc: add MODULE_LICENSE tag
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] soc: qcom: rmtfs-mem: fix memleak in probe error paths
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 4/4] venus: firmware: register separate driver for firmware device
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 0/2] Add support for LPASS clock controller for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] clk: qcom: Add lpass clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH] soc: qcom: llc-slice: Add missing MODULE_LICENSE()
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH v3 2/4] venus: firmware: move load firmware in a separate function
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v3 3/4] venus: firmware: add no TZ boot and shutdown routine
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v3 4/4] venus: firmware: register separate driver for firmware device
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v3 1/4] venus: firmware: add routine to reset ARM9
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v3 0/4] Venus updates - PIL
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH] arm: dts: qcom: Fix 'interrupts = <>' property to use proper macros
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 6/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH v3 6/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v3 1/6] soc: qcom: smem: Add missing include of sizes.h
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 2/6] soc: qcom: llcc-slice: Add missing include of sizes.h
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 5/6] soc: qcom: Remove bogus depends on OF from QCOM_SMD_RPM
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 4/6] soc: qcom: smsm: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 3/6] soc: qcom: smp2p: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 6/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 0/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v4 2/6] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v4 0/6] thermal: tsens: Refactoring for TSENSv2 IP
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCH v4 0/6] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v4 0/6] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v4 2/6] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [bug report] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: David Collins <collinsd@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH] arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add thermal-zones node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH] soc: qcom: llc-slice: Add missing MODULE_LICENSE()
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add thermal-zones node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH 1/3] arm64: dts: qcom: sdm845: Add thermal-zones node
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- [PATCH v2 0/2] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 1/2] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v10 00/14] Krait clocks + Krait CPUfreq
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH] rpmsg: glink: Set tail pointer to 0 at end of FIFO
- From: Chris Lew <clew@xxxxxxxxxxxxxx>
- [bug report] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH v10 00/14] Krait clocks + Krait CPUfreq
- From: Thierry Escande <thierry.escande@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
- [PATCH resend 01/12] soc: qcom: smem: rename variable in qcom_smem_get_global()
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 02/12] soc: qcom: smem: initialize region struct only when successful
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 03/12] soc: qcom: smem: always ignore partitions with 0 offset or size
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 04/12] soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 05/12] soc: qcom: smem: verify both host ids in partition header
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 07/12] soc: qcom: smem: introduce qcom_smem_partition_header()
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 08/12] soc: qcom: smem: verify partition header size
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 10/12] soc: qcom: smem: small change in global entry loop
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 11/12] soc: qcom: smem: verify partition host ids match
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 12/12] soc: qcom: smem: a few last cleanups
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 06/12] soc: qcom: smem: require order of host ids to match
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 09/12] soc: qcom: smem: verify partition offset_free_uncached
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH resend 00/12] soc: qcom: smem: some refactoring
- From: Alex Elder <elder@xxxxxxxxxx>
- Re: [PATCH] soc: qcom: smem: Correct check for global partition
- From: Alex Elder <elder@xxxxxxxxxx>
- [PATCH] soc: qcom: smem: Correct check for global partition
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 0/3] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 1/3] clk: qcom: Move frequency table macro to common file
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 2/3] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] venus: add check to make scm calls
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v13 00/10] drivers/qcom: add RPMH communication support
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: sdm845: Add rpmh-clk node
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] arm: dts: qcom: Fix 'interrupts = <>' property to use proper macros
- From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
- [PATCH v13 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v12 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 00/10] drivers/qcom: add RPMH communication support
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH] arm: dts: qcom: Fix 'interrupts = <>' property to use proper macros
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v10 13/14] cpufreq: Add module to register cpufreq on Krait CPUs
- From: sricharan@xxxxxxxxxxxxxx
- Re: [PATCH v10 13/14] cpufreq: Add module to register cpufreq on Krait CPUs
- From: sricharan@xxxxxxxxxxxxxx
- Re: [PATCH v12 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] clk: qcom: Add some missing gcc clks for msm8996
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: fix CLK_SET_RATE_GATE with clock rate protection
- From: Michael Turquette <mturquette@xxxxxxxxxxxx>
- Re: [PATCH 1/2] clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks
- From: Michael Turquette <mturquette@xxxxxxxxxxxx>
- Re: [PATCH v10 13/14] cpufreq: Add module to register cpufreq on Krait CPUs
- From: Craig Tatlor <ctatlor97@xxxxxxxxx>
- Re: [PATCH v2 0/2] Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v10 13/14] cpufreq: Add module to register cpufreq on Krait CPUs
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- [PATCH v10 02/14] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 06/14] clk: qcom: Add IPQ806X's HFPLLs
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 04/14] dt-bindings: clock: Document qcom,hfpll
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 01/14] ARM: Add Krait L2 register accessor functions
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 05/14] clk: qcom: Add MSM8960/APQ8064's HFPLLs
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 08/14] clk: qcom: Add KPSS ACC/GCC driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 09/14] dt-bindings: arm: Document qcom,kpss-gcc
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 11/14] dt-bindings: clock: Document qcom,krait-cc
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 13/14] cpufreq: Add module to register cpufreq on Krait CPUs
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 12/14] clk: qcom: Add safe switch hook for krait mux clocks
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 14/14] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 10/14] clk: qcom: Add Krait clock controller driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 07/14] clk: qcom: Add support for Krait clocks
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 03/14] clk: qcom: Add HFPLL driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v10 00/14] Krait clocks + Krait CPUfreq
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH 1/2] clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- [PATCH 2/2] clk: fix CLK_SET_RATE_GATE with clock rate protection
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- [PATCH 0/2] clk: enforce CLK_SET_RATE_GATE along the tree
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- [PATCH v12 00/10] drivers/qcom: add RPMH communication support
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v11 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v11 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: sdm845: Add rpmh-clk node
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: sdm845: Add rpmh-clk node
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/2] arm64: dts: sdm845: Add rpmh-rsc node
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- Re: [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- [PATCH v2] drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v11 00/10] drivers/qcom: add RPMH communication support
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- [PATCH] drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add lpass clock controller driver for SDM845
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v11 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 00/10] drivers/qcom: add RPMH communication support
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v10 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v13 1/8] soc: qcom: Separate kryo l2 accessors from PMU driver
- [PATCH v13 0/8] Clock for CPU scaling support for msm8996
- [PATCH v13 2/8] clk: qcom: Make clk_alpha_pll_configure available to modules
- [PATCH v13 4/8] clk: qcom: Add CPU clock driver for msm8996
- [PATCH v13 5/8] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
- [PATCH v13 3/8] clk: Use devm_ in the register fixed factor clock
- [PATCH v13 6/8] clk: qcom: cpu-8996: Add support to switch to alternate PLL
- [PATCH v13 7/8] clk: qcom: cpu-8996: Add support to switch below 600Mhz
- [PATCH v13 8/8] clk: qcom: Add ACD path to CPU clock driver for msm8996
- Re: [PATCH v10 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
- Re: [PATCH v3 4/6] thermal: tsens: Add support for SDM845
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH v3 4/6] thermal: tsens: Add support for SDM845
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH v2 2/7] soc: qcom: smem: Add missing include of sizes.h
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 7/7] soc: qcom: Allow COMPILE_TEST of all drivers
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 6/7] soc: qcom: Remove bogus depends on OF
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 3/7] soc: qcom: smp2p: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 4/7] soc: qcom: smsm: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 0/7] soc: qcom: Allow COMPILE_TEST of all drivers
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v3 2/6] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v3 4/6] thermal: tsens: Add support for SDM845
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v3 6/6] arm64: dts: sdm845: Add tsens nodes
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v3 0/6] thermal: tsens: Refactoring for TSENSv2 IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add lpass clock controller driver for SDM845
- From: kbuild test robot <lkp@xxxxxxxxx>
- [RFC PATCH] clk: qcom: gcc_lpass_sway_clk can be static
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH 0/2] Add support for LPASS clock controller for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH 2/2] clk: qcom: Add lpass clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v10 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v10 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH 5/5] soc: qcom: Remove depends on ARCH_QCOM
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH 4/5] soc: qcom: smsm: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH 3/5] soc: qcom: smp2p: Add select IRQ_DOMAIN
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH 2/5] soc: qcom: smem: Add missing include of sizes.h
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH 0/5] soc: qcom: remove depends on ARCH_QCOM
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- [PATCH v2 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v2 0/2] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH] clk: qcom: Move frequency table macro to common file
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH] clk: qcom: Move frequency table macro to common file
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/5] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH] soc: qcom: rmtfs-mem: fix memleak in probe error paths
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v2 2/5] dt: qcom: 8996: thermal: Move to DT initialisation
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- [PATCH v2 0/5] thermal: tsens: Prepare for version 2 of TSENS IP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v1] clk: qcom: Add support for RCG to register for DFS
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] soc: qcom: smem: fix checkpatch warnings
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH] soc: qcom: smem: fix checkpatch warnings
- From: Ramon Fried <ramon.fried@xxxxxxxxx>
- [PATCH v10 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v10 00/10] drivers/qcom: add RPMH communication support
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v9 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v9 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v9 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Julien Massot <jmassot@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] soc: qcom: apr: fix spelling mistake: "paket" -> "packet"
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH v3] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Julien Massot <jmassot@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH V2] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Vinod <vkoul@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Vinod <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 0/4] Add QCOM graphics clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 4/4] clk: qcom: Add graphics clock controller driver for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Vinod <vkoul@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Tomasz Figa <tfiga@xxxxxxxxxx>
- Re: [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Vinod Koul <vinod.koul@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Vinod <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Vinod <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Vinod <vkoul@xxxxxxxxxx>
- [PATCH] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 4/5] media: venus: add no TZ boot and shutdown routine
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 3/5] venus: add check to make scm calls
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
- [PATCH 0/2] Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: clock: Introduce QCOM Display clock bindings
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH 2/2] clk: qcom: Add display clock controller driver for SDM845
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] media: venus: add no TZ boot and shutdown routine
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] venus: add check to make scm calls
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- [PATCH v2 2/5] media: venus: add a routine to set venus state
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v2 5/5] venus: register separate driver for firmware device
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v2 4/5] media: venus: add no TZ boot and shutdown routine
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v2 3/5] venus: add check to make scm calls
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v2 1/5] media: venus: add a routine to reset ARM9
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- [PATCH v2 0/5] Venus updates - PIL
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH] clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: qcom: Add video clock controller driver for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM Video clock bindings
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] media: venus: add PIL support
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: qup: fix building without CONFIG_ACPI
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: qup: fix building without CONFIG_ACPI
- From: "Christ, Austin" <austinwc@xxxxxxxxxxxxxx>
- [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v9 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v9 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v9 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v8 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] i2c: qup: fix building without CONFIG_ACPI
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
- From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: algos: make use of i2c_8bit_addr_from_msg
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: busses: make use of i2c_8bit_addr_from_msg
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: msm8996: Move UFS_GDSC to UFS HCD
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH v2] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- [PATCH] ARM: dts: qcom: fix cpu0's qcom,saw2 reg value
- From: Christian Lamparter <chunkeey@xxxxxxxxx>
- [PATCH] clk: qcom: Enable clocks which needs to be always on for SDM845
- From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
- Re: [PATCH v9 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH] qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: fix regulator property name for wlan pcie endpoint
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH v2] arm64: dts: qcom: msm8996: Move UFS_GDSC to UFS HCD
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH] qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
- From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
- [PATCH v1] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH v1] clk: qcom: Add support for RCG to register for DFS
- From: Taniya Das <tdas@xxxxxxxxxxxxxx>
- [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- [PATCH 00/15] arm: dts: Fix OPP and cooling device properties
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- [PATCH v8 01/12] ARM: dts: ipq4019: Add a default chosen node
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 03/12] ARM: dts: ipq4019: Change the max opp frequency
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 02/12] ARM: dts: ipq4019: Add a few peripheral nodes
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 04/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 05/12] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 06/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 09/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 08/12] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 10/12] ARM: dts: ipq8074: Add peripheral nodes
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 11/12] ARM: dts: ipq8074: Add pcie nodes
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 12/12] ARM: dts: ipq8074: Enable few peripherals for hk01 board
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 07/12] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH v8 00/12] ARM: dts: ipq: updates to enable a few peripherals
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v9 02/15] clk: mux: Split out register accessors for reuse
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH] clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v9 02/15] clk: mux: Split out register accessors for reuse
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH v12 0/8] Clock for CPU scaling support for msm8996
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- [PATCH v9 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v9 00/10] drivers/qcom: add RPMH communication support
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v12 0/8] Clock for CPU scaling support for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 3/8] clk: Use devm_ in the register fixed factor clock
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 2/8] clk: qcom: Make clk_alpha_pll_configure available to modules
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 4/8] clk: qcom: Add CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 5/8] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 7/8] clk: qcom: cpu-8996: Add support to switch below 600Mhz
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 6/8] clk: qcom: cpu-8996: Add support to switch to alternate PLL
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 8/8] clk: qcom: Add ACD path to CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v12 1/8] soc: qcom: Separate kryo l2 accessors from PMU driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH v8 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v11 1/8] soc: qcom: Separate kryo l2 accessors from PMU driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v8 09/10] drivers: qcom: rpmh: add support for batch RPMH request
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- [PATCH v11 0/2] CPU scaling support for msm8996 DT
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 2/2] dt: qcom: Add qcom-cpufreq-kryo driver configuration
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 1/2] dt: qcom: Add opp and thermal to the msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 1/8] soc: qcom: Separate kryo l2 accessors from PMU driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 3/8] clk: Use devm_ in the register fixed factor clock
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 2/8] clk: qcom: Make clk_alpha_pll_configure available to modules
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 4/8] clk: qcom: Add CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 5/8] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 6/8] clk: qcom: cpu-8996: Add support to switch to alternate PLL
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 8/8] clk: qcom: Add ACD path to CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 7/8] clk: qcom: cpu-8996: Add support to switch below 600Mhz
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v11 0/8] CPU scaling support for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH v8 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v8 07/10] drivers: qcom: rpmh: cache sleep/wake state requests
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v8 04/10] drivers: qcom: rpmh: add RPMH helper functions
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH v8 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
- From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 3/4] venus: add check to make scm calls
- From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] venus: add check to make scm calls
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- [PATCH] arm64: dts: fix regulator property name for wlan pcie endpoint
- From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
- Re: [PATCH 3/4] venus: add check to make scm calls
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [PATCH v9 11/15] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 4/4] media: venus: add PIL support
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH v8 04/15] clk: qcom: Add CPU clock driver for msm8996
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH 3/4] venus: add check to make scm calls
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- Re: [PATCH 4/4] media: venus: add PIL support
- From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
- [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH V6 5/5] remoteproc: qcom: Add q6v5-wcss rproc ops
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH V6 3/5] remoteproc: qcom: Split the head and tail of the q5v5-pil rproc reset function
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- RE: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: <ilialin@xxxxxxxxxxxxxx>
- RE: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: <ilialin@xxxxxxxxxxxxxx>
- Applied "ASoC: qdsp6: q6routing: Add support to all SLIMBus Mixers" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v9 01/15] soc: qcom: Separate kryo l2 accessors from PMU driver
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- RE: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- RE: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: <ilialin@xxxxxxxxxxxxxx>
- Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- [PATCH v9 00/15] CPU scaling support for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 01/15] soc: qcom: Separate kryo l2 accessors from PMU driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 03/15] clk: Use devm_ in the register fixed factor clock
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 04/15] clk: qcom: Add CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 05/15] dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 07/15] clk: qcom: cpu-8996: Add support to switch below 600Mhz
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 09/15] dt: qcom: Add opp and thermal to the msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 10/15] cpufreq: Add Kryo CPU scaling driver
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 08/15] clk: qcom: Add ACD path to CPU clock driver for msm8996
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 14/15] dt-bindings: qcom_spmi: Document SAW support
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
- [PATCH v9 11/15] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
- From: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
[Index of Archives]
[Linux Samsung SoC]
[Linux Rockchip SoC]
[Linux for Synopsys ARC Processors]
[Linux Actions SoC]
[Linux Kernel]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Scanners]
[Yosemite Forum]