Hi Tomasz,
On 06/04/2018 04:18 PM, Tomasz Figa wrote:
> Hi Vikash,
>
> On Sat, Jun 2, 2018 at 5:27 AM Vikash Garodia <vgarodia@xxxxxxxxxxxxxx> wrote:
>>
>> A separate child device is added for video firmware.
>> This is needed to
>> [1] configure the firmware context bank with the desired SID.
>> [2] ensure that the iova for firmware region is from 0x0.
>>
>> Signed-off-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/media/qcom,venus.txt | 8 +++-
>> drivers/media/platform/qcom/venus/core.c | 48 +++++++++++++++++++---
>> drivers/media/platform/qcom/venus/firmware.c | 20 ++++++++-
>> drivers/media/platform/qcom/venus/firmware.h | 2 +
>> 4 files changed, 71 insertions(+), 7 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
>> index 00d0d1b..701cbe8 100644
>> --- a/Documentation/devicetree/bindings/media/qcom,venus.txt
>> +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
>> @@ -53,7 +53,7 @@
>>
>> * Subnodes
>> The Venus video-codec node must contain two subnodes representing
>> -video-decoder and video-encoder.
>> +video-decoder and video-encoder, one optional firmware subnode.
>>
>> Every of video-encoder or video-decoder subnode should have:
>>
>> @@ -79,6 +79,8 @@ Every of video-encoder or video-decoder subnode should have:
>> power domain which is responsible for collapsing
>> and restoring power to the subcore.
>>
>> +The firmware sub node must contain the iommus specifiers for ARM9.
>
> Please document the compatible string here as well.
>
>> +
>> * An Example
>> video-codec@1d00000 {
>> compatible = "qcom,msm8916-venus";
>> @@ -105,4 +107,8 @@ Every of video-encoder or video-decoder subnode should have:
>> clock-names = "core";
>> power-domains = <&mmcc VENUS_CORE1_GDSC>;
>> };
>> + venus-firmware {
>> + compatible = "qcom,venus-firmware-no-tz";
>
> I don't think "-no-tz" should be mentioned here in DT, since it's a
> firmware/software detail.
I have to agree with Tomasz, non-tz or tz is a software detail and it
shouldn't be reflected in compatible string.
Also I'm not sure but what will happen if this video-firmware subnode is
not added, do you expect that backward compatibility is satisfied for
older venus versions?
>
>> + iommus = <&apps_smmu 0x10b2 0x0>;
>> + }
>> };
>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>> index 101612b..5cfb3c2 100644
>> --- a/drivers/media/platform/qcom/venus/core.c
>> +++ b/drivers/media/platform/qcom/venus/core.c
>> @@ -179,6 +179,19 @@ static u32 to_v4l2_codec_type(u32 codec)
>> }
>> }
>>
>> +static int store_firmware_dev(struct device *dev, void *data)
>> +{
>> + struct venus_core *core = data;
>> +
>> + if (!core)
>> + return -EINVAL;
>> +
>
> No need to check this AFAICT.>
>> + if (of_device_is_compatible(dev->of_node, "qcom,venus-firmware-no-tz"))
>> + core->fw.dev = dev;
>> +
>> + return 0;
>> +}
>> +
>> static int venus_enumerate_codecs(struct venus_core *core, u32 type)
>> {
>> const struct hfi_inst_ops dummy_ops = {};
>> @@ -279,6 +292,13 @@ static int venus_probe(struct platform_device *pdev)
>> if (ret < 0)
>> goto err_runtime_disable;
>>
>> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>> + if (ret)
>> + goto err_runtime_disable;
>> +
>> + /* Attempt to store firmware device */
>> + device_for_each_child(dev, core, store_firmware_dev);
>> +
>> ret = venus_boot(core);
>> if (ret)
>> goto err_runtime_disable;
>> @@ -303,10 +323,6 @@ static int venus_probe(struct platform_device *pdev)
>> if (ret)
>> goto err_core_deinit;
>>
>> - ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>> - if (ret)
>> - goto err_dev_unregister;
>> -
>> ret = pm_runtime_put_sync(dev);
>> if (ret)
>> goto err_dev_unregister;
>> @@ -483,7 +499,29 @@ static __maybe_unused int venus_runtime_resume(struct device *dev)
>> .pm = &venus_pm_ops,
>> },
>> };
>> -module_platform_driver(qcom_venus_driver);
>> +
>> +static int __init venus_init(void)
>> +{
>> + int ret;
>> +
>> + ret = platform_driver_register(&qcom_video_firmware_driver);
>> + if (ret)
>> + return ret;
>
> Do we really need this firmware driver? As far as I can see, the
> approach used here should work even without any driver bound to the
> firmware device.
We need device/driver bind because we need to call dma_configure() which
internally doing iommus sID parsing.
--
regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
