In an early version of the I2C patch that was posted to the list the default I2C frequency (if none was specified) was 400 kHz. There was debate on the list and we decided that it would be more consistent with the rest of i2c if we defaulted to 100 kHz. ...but we never updated the bindings. Let's fix this. NOTE: since the i2c driver itself hasn't actually landed yet and the SoC here is very new it seems terribly unlikely that anyone was relying on the old 400 kHz number, so I'll assume this is an OK "incompatible" device tree change. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index d330c73de9a2..68b7d6207e3d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -39,7 +39,7 @@ Required properties: Optional property: - clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 400000Hz. + When missing default to 100000Hz. Child nodes should conform to I2C bus binding as described in i2c.txt. -- 2.18.0.rc1.244.gcf134e6275-goog -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
