SDM845 uses the TSENS v2 IP block Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> --- Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 1 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- drivers/thermal/qcom/tsens-v2.c | 9 ++++++++- drivers/thermal/qcom/tsens.c | 3 +++ drivers/thermal/qcom/tsens.h | 5 ++++- 5 files changed, 17 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 06195e8..84da3db 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -5,6 +5,7 @@ Required properties: - "qcom,msm8916-tsens" : For 8916 Family of SoCs - "qcom,msm8974-tsens" : For 8974 Family of SoCs - "qcom,msm8996-tsens" : For 8996 Family of SoCs + - "qcom,tsens-v2" : For any SoC with v2 version of the tsens IP - reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 6c8a857..28d4c08 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -460,7 +460,7 @@ }; tsens0: thermal-sensor@4a8000 { - compatible = "qcom,msm8996-tsens"; + compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c index c981a40..abc8f13 100644 --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -69,8 +69,15 @@ static const struct tsens_ops ops_v2 = { .get_temp = get_temp_tsens_v2, }; +const struct tsens_data data_tsens_v2 = { + .ops = &ops_v2, +}; + +/* Kept around for backward compatibility with old msm8996.dtsi. + * New platforms should use data_tsens_v2 if possible and define + * the #qcom,sensors property in DT. + */ const struct tsens_data data_8996 = { .num_sensors = 13, .ops = &ops_v2, }; - diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 3440166c..a2c9bfa 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = { }, { .compatible = "qcom,msm8996-tsens", .data = &data_8996, + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, }, {} }; diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index dc56e1e..69212cb 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -87,6 +87,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); int init_common(struct tsens_device *); int get_temp_common(struct tsens_device *, int, int *); -extern const struct tsens_data data_8916, data_8974, data_8960, data_8996; +/* TSENS v1 targets */ +extern const struct tsens_data data_8916, data_8974, data_8960; +/* TSENS v2 targets */ +extern const struct tsens_data data_8996, data_tsens_v2; #endif /* __QCOM_TSENS_H__ */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html