Linux SoC

• Thread Index

• Re: [PATCH v2 3/6] drivers: qcom: rpmh: disallow active requests in solver mode
  • From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle
  • From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] drivers: qcom: rpmh: disallow active requests in solver mode
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] Add support for LPASS clock controller for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH v3 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod <vkoul@xxxxxxxxxx>
• [PATCH v5 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v5 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v5 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v5 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v5 0/4] Add EDAC driver for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: dkota@xxxxxxxxxxxxxx
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: sdm845: add prng-ee node
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: sdm845: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 0/2] arm64: dts: add prng-ee nodes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: qcom: apq8096-db820c: Add resin node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 3/4] arm64: dts: qcom: apq8016-sbc: Add resin node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 2/4] arm64: dts: qcom: pm8994: Add PON node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 1/4] arm64: dts: qcom: pm8916: Add PON node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v5 0/4] arm64: dts: Add PON & resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v1 2/2] arm64: dts: msm8916: Add camera thermal zone
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v1 1/2] arm64: dts: msm8916: Add gpu thermal management
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v1 0/2] Add gpu and camera thermal zones for msm8916
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: dkota@xxxxxxxxxxxxxx
• Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V12 00/14] Krait clocks + Krait CPUfreq
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: dkota@xxxxxxxxxxxxxx
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: dkota@xxxxxxxxxxxxxx
• Re: [PATCH V12 00/14] Krait clocks + Krait CPUfreq
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: apq8096-db820c: Add resin node
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: qcom: apq8096-db820c: Add resin node
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: qcom: apq8096-db820c: Add resin node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 3/4] arm64: dts: qcom: apq8016-sbc: Add resin node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 2/4] arm64: dts: qcom: pm8994: Add PON node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 1/4] arm64: dts: qcom: pm8916: Add PON node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 0/4] arm64: dts: Add PON & resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: sdm845: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v4 0/2] arm64: dts: add prng-ee nodes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: sdm845: add prng-ee node
  • From: Vinod <vkoul@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: sdm845: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: msm8996: add prng-ee node
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 0/2] arm64: dts: add prng-ee nodes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 2/2] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-mtp: pm8998 and pmi8998 regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-mtp: pm8998 and pmi8998 regulators
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845-mtp: pm8998 and pmi8998 regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/2] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: Add AOSS reset driver node for SDM845
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: msm8996: Drop model
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: msm8916: Drop model and compatible
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/2] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 0/6] drivers/qcom: add additional functionality to RPMH
  • From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: msm8996: Drop model
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: msm8916: Drop model and compatible
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v2 1/3] arm64: dts: db820c: Add qcom,apq8096 to compatible string
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v2 0/3] arm msm compatible+model cleanup
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: dts: qcom: Add reg-names for all tsens nodes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 0/4] Add EDAC driver for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• [PATCH v3 08/15] soc: octeontx2: Add RVU block LF provisioning support
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 07/15] soc: octeontx2: Scan blocks for LFs provisioned to PF/VF
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 06/15] soc: octeontx2: Convert mbox msg id check to a macro
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 05/15] soc: octeontx2: Add mailbox IRQ and msg handlers
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 04/15] soc: octeontx2: Add mailbox support infra
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 03/15] soc: octeontx2: Gather RVU blocks HW info
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 09/15] soc: octeontx2: Configure block LF's MSIX vector offset
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 14/15] soc: octeontx2: Register for CGX lmac events
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 13/15] soc: octeontx2: Add support for CGX link management
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 12/15] soc: octeontx2: Set RVU PFs to CGX LMACs mapping
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 02/15] soc: octeontx2: Reset all RVU blocks
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 01/15] soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v3 00/15] soc: octeontx2: Add RVU admin function driver
  • From: sunil.kovvuri@xxxxxxxxx
• Re: [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 05/15] soc: octeontx2: Add mailbox IRQ and msg handlers
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 03/15] soc: octeontx2: Gather RVU blocks HW info
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 02/15] soc: octeontx2: Reset all RVU blocks
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 01/15] soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 07/15] soc: octeontx2: Scan blocks for LFs provisioned to PF/VF
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 06/15] soc: octeontx2: Convert mbox msg id check to a macro
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 13/15] soc: octeontx2: Add support for CGX link management
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 08/15] soc: octeontx2: Add RVU block LF provisioning support
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 12/15] soc: octeontx2: Set RVU PFs to CGX LMACs mapping
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 09/15] soc: octeontx2: Configure block LF's MSIX vector offset
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 14/15] soc: octeontx2: Register for CGX lmac events
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 04/15] soc: octeontx2: Add mailbox support infra
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH v2 00/15] soc: octeontx2: Add RVU admin function driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH] arm64: dts: qcom: Populate pm8998 with some nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 2/8] arm64: dts: qcom: msm8998: Add RPM and regulators for MTP
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: qcom: msm8998: Add smp2p nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: msm8998: Add the qfprom node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 6/8] arm64: dts: qcom: msm8998: Add firmware node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 5/8] arm64: dts: qcom: msm8998: Add smem related nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 4/8] arm64: dts: qcom: msm8998: Add pmi8998 file
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 1/8] arm64: dts: Add msm8998 SoC and MTP board support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 0/8] MSM8998 and MTP dts
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: dts: qcom: Add reg-names for all tsens nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 02/11] arm/arm64: dts: msm8974/msm8916: thermal: Add "qcom,sensors" property
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: db820c: Add qcom,apq8096 to compatible string
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: msm8996: Add a default compatible string
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 9/9] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 8/9] soc: qcom: apr: Avoid string overflow
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 6/9] soc: qcom: Remove depends on OF from QCOM_RPMH
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 7/9] soc: qcom: wcnss_ctrl: Avoid string overflow
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] drivers: qcom: rpmh: use struct_size() in kzalloc()
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: sdm845: add prng-ee support
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: sdm845: add prng-ee support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: msm8996: add prng-ee support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: apq8096-db820c: Add resin binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: apq8016-sbc: Add resin binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 2/4] arm64: dts: qcom: pm8994: Add PON binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/4] arm64: dts: qcom: pm8916: Add PON binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845: Add adsp, cdsp and slpi smp2p
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: Add AOSS reset driver node for SDM845
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845-mtp: pm8998 and pmi8998 regulators
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v3] clk: qcom: Add camera clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 0/3] firmware: qcom: scm: Improve clock handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 0/3] firmware: qcom: scm: Improve clock handling
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: firmware: scm: Add MSM8998 and SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/3] firmware: qcom: scm: Refactor clock handling
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: firmware: scm: Refactor compatibles and clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] clk: qcom: clk-branch: Use true and false for boolean values
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: Allocate space for NULL terimation in DFS table
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• [PATCH 1/2] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/2] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• [PATCH] clk: qcom: Allocate space for NULL terimation in DFS table
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH v3 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/3] firmware: qcom: scm: Improve clock handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: firmware: scm: Refactor compatibles and clocks
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/3] firmware: qcom: scm: Refactor clock handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: firmware: scm: Add MSM8998 and SDM845
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [RFC PATCH] drivers: edac: edac_reg_data[] can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH v3 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: msm8996: Add a default compatible string
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: db820c: Add qcom,apq8096 to compatible string
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• Re: [PATCH v3 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: dkota@xxxxxxxxxxxxxx
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• RE: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Qiang Zhao <qiang.zhao@xxxxxxx>
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v6 9/9] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 8/9] soc: qcom: apr: Avoid string overflow
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 7/9] soc: qcom: wcnss_ctrl: Avoid string overflow
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 6/9] soc: qcom: Remove depends on OF from QCOM_RPMH
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 4/9] soc: qcom: smsm: Add select IRQ_DOMAIN
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 5/9] soc: qcom: Remove bogus depends on OF from QCOM_SMD_RPM
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 3/9] soc: qcom: smp2p: Add select IRQ_DOMAIN
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 2/9] soc: qcom: llcc-slice: Add missing include of sizes.h
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 1/9] soc: qcom: smem: Add missing include of sizes.h
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v6 0/9] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v3 0/4] Add EDAC driver for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] dt-bindings: msm: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Li Yang <leoyang.li@xxxxxxx>
• Re: [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Li Yang <leoyang.li@xxxxxxx>
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v2 10/11] arm64: dts: qcom: Add reg-names for all tsens nodes
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v2 02/11] arm/arm64: dts: msm8974/msm8916: thermal: Add "qcom,sensors" property
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v2 01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v2 00/11] Another round of tsens cleanups
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Sunil Kovvuri <sunil.kovvuri@xxxxxxxxx>
• Re: [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 15/15] MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 14/15] soc: octeontx2: Register for CGX lmac events
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 13/15] soc: octeontx2: Add support for CGX link management
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 12/15] soc: octeontx2: Set RVU PFs to CGX LMACs mapping
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 11/15] soc: octeontx2: Add Marvell OcteonTX2 CGX driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 10/15] soc: octeontx2: Reconfig MSIX base with IOVA
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 09/15] soc: octeontx2: Configure block LF's MSIX vector offset
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 08/15] soc: octeontx2: Add RVU block LF provisioning support
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 06/15] soc: octeontx2: Convert mbox msg id check to a macro
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 07/15] soc: octeontx2: Scan blocks for LFs provisioned to PF/VF
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 05/15] soc: octeontx2: Add mailbox IRQ and msg handlers
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 03/15] soc: octeontx2: Gather RVU blocks HW info
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 01/15] soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 04/15] soc: octeontx2: Add mailbox support infra
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 02/15] soc: octeontx2: Reset all RVU blocks
  • From: sunil.kovvuri@xxxxxxxxx
• [PATCH 00/15] soc: octeontx2: Add RVU admin function driver
  • From: sunil.kovvuri@xxxxxxxxx
• Re: [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v5 6/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Add smp2p nodes
  • From: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845: Add smp2p nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• [PATCH] arm64: dts: msm8996: Transition smp2p and smd to mailbox
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] soc: qcom: rmtfs-mem: Validate that scm is available
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] soc: Convert to using %pOFn instead of device_node.name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 6/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 5/6] soc: qcom: Remove bogus depends on OF from QCOM_SMD_RPM
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 4/6] soc: qcom: smsm: Add select IRQ_DOMAIN
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 3/6] soc: qcom: smp2p: Add select IRQ_DOMAIN
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 2/6] soc: qcom: llcc-slice: Add missing include of sizes.h
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 1/6] soc: qcom: smem: Add missing include of sizes.h
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v5 0/6] soc: qcom: Allow COMPILE_TEST of qcom SoC Kconfigs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: sdm845: add prng-ee support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: msm8996: add prng-ee support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: add prng-ee support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: qcom: apq8096-db820c: Add resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 3/4] arm64: dts: qcom: apq8016-sbc: Add resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 2/4] arm64: dts: qcom: pm8994: Add PON binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 1/4] arm64: dts: qcom: pm8916: Add PON binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 0/4] arm64: dts: Add PON & resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v6 2/4] venus: firmware: move load firmware in a separate function
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH] drivers: qcom: rpmh: avoid sending sleep/wake sets immediately
  • From: Lina Iyer <ilina@xxxxxxxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH RFC 5/6] drivers: qcom: rpmh: force flush new sleep/wake requests during suspend
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 6/6] drivers: soc: system_pm: Add suspend notifier
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 4/6] drivers: qcom: system_pm: program next wakeup to PDC timer
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 3/6] drivers: qcom: system_pm: Add power management ops
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 2/6] dt-bindings: introduce System PM bindings for Qualcomm SoCs
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 1/6] drivers: qcom: system_pm: add system PM client for RPMH based SoCs
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• [PATCH RFC 0/6] drivers: qcom: enable system low power modes for SDM845
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• [PATCH] drivers: qcom: rpmh: avoid sending sleep/wake sets immediately
  • From: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
• Re: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v2 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH V3] spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
  • From: Dilip Kota <dkota@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] venus: firmware: move load firmware in a separate function
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Venus updates - PIL
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] venus: firmware: move load firmware in a separate function
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Alexandre Courbot <acourbot@xxxxxxxxxxxx>
• Re: [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] drivers: qcom: rpmh: use struct_size() in kzalloc()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] drivers: qcom: rpmh: use struct_size() in kzalloc()
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v6 1/4] venus: firmware: add routine to reset ARM9
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v6 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v6 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v6 0/4] Venus updates - PIL
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindigs: msm: Update documentation of qcom,llcc
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] venus: firmware: move load firmware in a separate function
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 4/4] venus: firmware: register separate driver for firmware device
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 0/4] Venus updates - PIL
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v5 1/4] venus: firmware: add routine to reset ARM9
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v4 1/4] venus: firmware: add routine to reset ARM9
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v4 2/4] venus: firmware: move load firmware in a separate function
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Venus updates - PIL
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindigs: msm: Update documentation of qcom,llcc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v12 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH V2] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding for avago,apds9930
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v2 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] dt-bindigs: msm: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] Add EDAC driver for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v12 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: scm: Add sdm660 soc compatible
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] firmware: qcom: scm: Add sdm660 soc compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smd-rpm: Add sdm660 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V12 00/14] Krait clocks + Krait CPUfreq
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 06/14] clk: qcom: Add IPQ806X's HFPLLs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 09/14] dt-bindings: arm: Document qcom,kpss-gcc
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 07/14] clk: qcom: Add support for Krait clocks
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 12/14] clk: qcom: Add safe switch hook for krait mux clocks
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 10/14] clk: qcom: Add Krait clock controller driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 11/14] dt-bindings: clock: Document qcom,krait-cc
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 08/14] clk: qcom: Add KPSS ACC/GCC driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 04/14] dt-bindings: clock: Document qcom,hfpll
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 05/14] clk: qcom: Add MSM8960/APQ8064's HFPLLs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 03/14] clk: qcom: Add HFPLL driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 02/14] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v12 01/14] ARM: Add Krait L2 register accessor functions
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V12 00/14] Krait clocks + Krait CPUfreq
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 14/14] cpufreq: qcom: Add support for krait based socs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 12/14] clk: qcom: Add safe switch hook for krait mux clocks
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 11/14] dt-bindings: clock: Document qcom,krait-cc
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 10/14] clk: qcom: Add Krait clock controller driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 09/14] dt-bindings: arm: Document qcom,kpss-gcc
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 08/14] clk: qcom: Add KPSS ACC/GCC driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 07/14] clk: qcom: Add support for Krait clocks
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 04/14] dt-bindings: clock: Document qcom,hfpll
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 05/14] clk: qcom: Add MSM8960/APQ8064's HFPLLs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 06/14] clk: qcom: Add IPQ806X's HFPLLs
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 03/14] clk: qcom: Add HFPLL driver
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 02/14] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 01/14] ARM: Add Krait L2 register accessor functions
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V11 00/14] Krait clocks + Krait CPUfreq
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• Re: [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• Re: [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] clk: qcom: Add graphics clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: clock: Introduce QCOM Graphics clock bindings
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Add QCOM graphics clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• [PATCH V2] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] clk: qcom: gcc_sdm660_hws[] can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• [PATCH] firmware: qcom: scm: Add sdm660 soc compatible
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• [PATCH] soc: qcom: smd-rpm: Add sdm660 compatible
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• [PATCH v4 2/2] clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v4 1/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v4 0/2] clk: qcom: Add support for RCG to register for DFS
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dts: arm64/sdm845: Add node for arm,mmu-500
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sdm845: Add USB-related nodes
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] clk: qcom: Add Global Clock controller (GCC) driver for SDM660
  • From: Craig Tatlor <ctatlor97@xxxxxxxxx>
• Re: [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1 09/10] arm64: dts: qcom: Add reg-names for all tsens nodes
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v1 09/10] arm64: dts: qcom: Add reg-names for all tsens nodes
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v1 01/10] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• [PATCH v1 00/10] Another round of tsens cleanups
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Kexec for db820c not working
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH] arm64: dts: sdm845: Add dispcc node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: pm8998: Add adc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
• [PATCH v3] clk: qcom: Add camera clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v3] Add QCOM camera clock controller driver
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding for avago,apds9930
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] arm: dts: qcom: Add ipq8064-ap161.dts
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] arm: dts: qcom: Add ipq8064-ap161.dts
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v4 4/4] venus: firmware: register separate driver for firmware device
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] venus: firmware: add routine to reset ARM9
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH v4 0/4] Venus updates - PIL
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] venus: firmware: move load firmware in a separate function
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
• [PATCH] clk: qcom: clk-branch: Use true and false for boolean values
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] arm64: dts: sdm845: Add dispcc node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding for avago,apds9930
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/9] iio: tsl2772: add support for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/5] arm: dts: qcom: Add pcie nodes for ipq8064
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 3/5] arm: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 5/5] arm: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 4/5] arm: dts: qcom: Add ipq8064-ap161.dts
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 2/5] arm: dts: qcom: Add sdcc nodes for ipq8064
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH 0/5] arm: dts: qcom: Few updates for ipq8064
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for LPASS clock controller for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: clock: Introduce QCOM LPASS clock bindings
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: qcom: Add lpass clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding for avago,apds9930
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 5/9] iio: tsl2772: add support for regulator framework
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH v3 0/9] treewide: add support for various sensors on the LG Nexus 5 (hammerhead)
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v1 0/4] Add EDAC driver for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v1 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v1 4/4] dt-bindigs: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 4/5] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 3/5] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 2/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Improve thermal zone in example
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: thermal: qcom-spmi-temp-alarm: Fix documentation of 'reg'
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v6 4/5] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: apq8096-db820c: Add resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: apq8016-sbc: Add resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: pm8994: Add PON binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 1/4] arm64: dts: qcom: pm8916: Add PON binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm8994: Add PON and resin binding
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm8994: Add PON and resin binding
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm8994: Add PON and resin binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: pm8916: Add PON and resin binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: pm8994: Add PON and resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: pm8916: Add PON and resin binding
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v0 3/4] drivers: edac: Add cache erp driver for Last Level Cache Controller (LLCC)
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH V4 1/9] dt-bindings: soc: qcom: Add label for GLINK bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v0 3/4] drivers: edac: Add cache erp driver for Last Level Cache Controller (LLCC)
  • From: vnkgutta@xxxxxxxxxxxxxx
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• [PATCH v2] Add QCOM camera clock controller driver
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
• Re: [PATCH v0 3/4] drivers: edac: Add cache erp driver for Last Level Cache Controller (LLCC)
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: sdm845: add prng-ee support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: msm8996: add prng-ee support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH V4 1/9] dt-bindings: soc: qcom: Add label for GLINK bindings
  • From: Arun Kumar Neelakantam <aneela@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] drivers: qcom: rpmh: write PDC data
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] drivers: qcom: rpmh-rsc: write PDC data
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] drivers: qcom: rpmh-rsc: clear active mode configuration for waketcs
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] drivers: qcom: rpmh: disallow active requests in solver mode
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] drivers: qcom: rpmh: export controller idle status
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] drivers: qcom: rpmh-rsc: return if the controller is idle
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] drivers/qcom: add additional functionality to RPMH
  • From: Raju P L S S S N <rplsssn@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• Re: [PATCH v5] clk: qcom: Add display clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: qcom: Add support for RCG to register for DFS
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: clock: Introduce QCOM Camera clock bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 2/2] clk: qcom: Add camera clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] clk: fix apss cpu overclocking
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v0 4/4] dt-bindigs: Update documentation of qcom,llcc
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v0 3/4] drivers: edac: Add cache erp driver for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v0 2/4] drivers: soc: Support to add cache erp driver for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v0 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• [PATCH v0 0/4] Add cache erp driver for Last Level Cache Controller (LLCC)
  • From: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: qcom: Update SPDX headers for common files
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: trivial: remove tsl2772
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v3 1/4] venus: firmware: add routine to reset ARM9
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v3 3/4] venus: firmware: add no TZ boot and shutdown routine
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v3 2/4] venus: firmware: move load firmware in a separate function
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH v3 1/4] venus: firmware: add routine to reset ARM9
  • From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: Add clk_rcg2_gfx3d_ops for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: gdsc: Add support to enable/disable the clocks with GDSC
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v5 1/3] thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: pm8998: Add pm8998 thermal zone
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH v5 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] clk: qcom: Add display clock controller driver for SDM845
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
  • From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Taniya Das <tdas@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/12] i2c: qup: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>