Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,


On 04/19/18 18:17, Bjorn Andersson wrote:
> Attempt to acquire the APCS IPC through the mailbox framework and fall
> back to the old syscon based approach, to allow us to move away from
> using the syscon.
> 
> Reviewed-by: Arun Kumar Neelakantam <aneela@xxxxxxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> Changes since v2:
> - Added comment about mbox_send_message() return value.
> 
>  .../devicetree/bindings/soc/qcom/qcom,smd.txt      |  8 ++-
>  drivers/rpmsg/Kconfig                              |  1 +
>  drivers/rpmsg/qcom_smd.c                           | 67 ++++++++++++++++------
>  3 files changed, 56 insertions(+), 20 deletions(-)

This patch in the mainline Linux kernel as commit ab460a2e72dabecfdabd45eb7e3ee2d73fc876d4
causes a problem with the APQ8074 Dragonboard.  The mmc device is not set up
with the patch applied, thus I do not have the block device my root file system
is located on.

Testing on v4.18, if I revert this commit the mmc device is available.

I'll reply to this email with the console messages for 4.18 and for 4.18 with
this commit reverted.

-Frank


> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
> index ea1dc75ec9ea..234ae2256501 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
> @@ -22,9 +22,15 @@ The edge is described by the following properties:
>  	Definition: should specify the IRQ used by the remote processor to
>  		    signal this processor about communication related updates
>  
> -- qcom,ipc:
> +- mboxes:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> +	Definition: reference to the associated doorbell in APCS, as described
> +		    in mailbox/mailbox.txt
> +
> +- qcom,ipc:
> +	Usage: required, unless mboxes is specified
> +	Value type: <prop-encoded-array>
>  	Definition: three entries specifying the outgoing ipc bit used for
>  		    signaling the remote processor:
>  		    - phandle to a syscon node representing the apcs registers
> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> index 0fe6eac46512..2e4fb4ffd562 100644
> --- a/drivers/rpmsg/Kconfig
> +++ b/drivers/rpmsg/Kconfig
> @@ -39,6 +39,7 @@ config RPMSG_QCOM_GLINK_SMEM
>  
>  config RPMSG_QCOM_SMD
>  	tristate "Qualcomm Shared Memory Driver (SMD)"
> +	depends on MAILBOX
>  	depends on QCOM_SMEM
>  	select RPMSG
>  	help
> diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
> index bc0b30657230..3ff271a44bef 100644
> --- a/drivers/rpmsg/qcom_smd.c
> +++ b/drivers/rpmsg/qcom_smd.c
> @@ -14,6 +14,7 @@
>  
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> +#include <linux/mailbox_client.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/of_irq.h>
> @@ -107,6 +108,8 @@ static const struct {
>   * @ipc_regmap:		regmap handle holding the outgoing ipc register
>   * @ipc_offset:		offset within @ipc_regmap of the register for ipc
>   * @ipc_bit:		bit in the register at @ipc_offset of @ipc_regmap
> + * @mbox_client:	mailbox client handle
> + * @mbox_chan:		apcs ipc mailbox channel handle
>   * @channels:		list of all channels detected on this edge
>   * @channels_lock:	guard for modifications of @channels
>   * @allocated:		array of bitmaps representing already allocated channels
> @@ -129,6 +132,9 @@ struct qcom_smd_edge {
>  	int ipc_offset;
>  	int ipc_bit;
>  
> +	struct mbox_client mbox_client;
> +	struct mbox_chan *mbox_chan;
> +
>  	struct list_head channels;
>  	spinlock_t channels_lock;
>  
> @@ -366,7 +372,17 @@ static void qcom_smd_signal_channel(struct qcom_smd_channel *channel)
>  {
>  	struct qcom_smd_edge *edge = channel->edge;
>  
> -	regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
> +	if (edge->mbox_chan) {
> +		/*
> +		 * We can ignore a failing mbox_send_message() as the only
> +		 * possible cause is that the FIFO in the framework is full of
> +		 * other writes to the same bit.
> +		 */
> +		mbox_send_message(edge->mbox_chan, NULL);
> +		mbox_client_txdone(edge->mbox_chan, 0);
> +	} else {
> +		regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
> +	}
>  }
>  
>  /*
> @@ -1326,27 +1342,37 @@ static int qcom_smd_parse_edge(struct device *dev,
>  	key = "qcom,remote-pid";
>  	of_property_read_u32(node, key, &edge->remote_pid);
>  
> -	syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
> -	if (!syscon_np) {
> -		dev_err(dev, "no qcom,ipc node\n");
> -		return -ENODEV;
> -	}
> +	edge->mbox_client.dev = dev;
> +	edge->mbox_client.knows_txdone = true;
> +	edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0);
> +	if (IS_ERR(edge->mbox_chan)) {
> +		if (PTR_ERR(edge->mbox_chan) != -ENODEV)
> +			return PTR_ERR(edge->mbox_chan);
>  
> -	edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
> -	if (IS_ERR(edge->ipc_regmap))
> -		return PTR_ERR(edge->ipc_regmap);
> +		edge->mbox_chan = NULL;
>  
> -	key = "qcom,ipc";
> -	ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
> -	if (ret < 0) {
> -		dev_err(dev, "no offset in %s\n", key);
> -		return -EINVAL;
> -	}
> +		syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
> +		if (!syscon_np) {
> +			dev_err(dev, "no qcom,ipc node\n");
> +			return -ENODEV;
> +		}
>  
> -	ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
> -	if (ret < 0) {
> -		dev_err(dev, "no bit in %s\n", key);
> -		return -EINVAL;
> +		edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
> +		if (IS_ERR(edge->ipc_regmap))
> +			return PTR_ERR(edge->ipc_regmap);
> +
> +		key = "qcom,ipc";
> +		ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
> +		if (ret < 0) {
> +			dev_err(dev, "no offset in %s\n", key);
> +			return -EINVAL;
> +		}
> +
> +		ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
> +		if (ret < 0) {
> +			dev_err(dev, "no bit in %s\n", key);
> +			return -EINVAL;
> +		}
>  	}
>  
>  	ret = of_property_read_string(node, "label", &edge->name);
> @@ -1452,6 +1478,8 @@ struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
>  	return edge;
>  
>  unregister_dev:
> +	if (!IS_ERR_OR_NULL(edge->mbox_chan))
> +		mbox_free_channel(edge->mbox_chan);
>  	put_device(&edge->dev);
>  	return ERR_PTR(ret);
>  }
> @@ -1480,6 +1508,7 @@ int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
>  	if (ret)
>  		dev_warn(&edge->dev, "can't remove smd device: %d\n", ret);
>  
> +	mbox_free_channel(edge->mbox_chan);
>  	device_unregister(&edge->dev);
>  
>  	return 0;
> 




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux