Quoting Amit Nischal (2018-07-12 05:23:48) > On 2018-07-09 11:04, Stephen Boyd wrote: > > Quoting Amit Nischal (2018-06-06 04:41:45) > >> For some of the GDSCs, there is a requirement to enable/disable the > >> few clocks before turning on/off the gdsc power domain. Add support > > > > Why is there a requirement? Do the clks need to be in hw control mode > > or > > they can't be turned off when the GDSC is off? It's hard for me to > > understand with these vague statements. > > > > This requirement is primarily to turn on the GPU GX GDSC and these > clocks > do not need to be in HW control mode and clock disable is not related > with the GDSC. Ok that's good to know. > > To turn on the GX GDSC, root clock (GFX3D RCG) needs to be enabled first > before writing to SW_COLLAPSE bit of the GDSC. The CLK_ON signal from > RCG > would power up the GPU GX GDSC. Can you please put this specific information in the commit text instead of making a vague statement about GDSC hardware configurations? Does anything go wrong if the GDSC is enabled from genpd but doesn't actually turn on until the GFX3D RCG root bit is enabled or disabled by the clk enable call? I suppose we won't know if the GDSC is enabled or not until the clk is enabled? Maybe we should make the clk enable of the RCG for GPU go check the GDSC status bit as well to make sure it's toggling on or off? Also, does the RCG turn on when the GX GDSC is off? I think we may be able to rely on the GPU driver to "do the right thing" and enable the GPU CX GDSC first, then the RCG and branch for the GFX3D clk, and then the GPU GX GDSC for the core GPU logic. Then we don't need to do anything special in the GDSC code for this. -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
