Re: [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 1, 2018 at 1:34 PM Venkata Narendra Kumar Gutta
<vnkgutta@xxxxxxxxxxxxxx> wrote:
>
> From: Channagoud Kadabi <ckadabi@xxxxxxxxxxxxxx>
>
> Add error reporting driver for SBEs and DBEs. As of now, this driver
> supports erp for Last Level Cache Controller (LLCC). This driver takes
> care of dumping registers and adding config options to enable and
> disable panic when the errors happen in cache.
>
> Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
> Signed-off-by: Channagoud Kadabi <ckadabi@xxxxxxxxxxxxxx>
> ---
>  MAINTAINERS              |   7 +
>  drivers/edac/Kconfig     |  28 +++
>  drivers/edac/Makefile    |   1 +
>  drivers/edac/qcom_edac.c | 507 +++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 543 insertions(+)
>  create mode 100644 drivers/edac/qcom_edac.c
>
...
> diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
> new file mode 100644
> index 0000000..cf3e2b0
> --- /dev/null
> +++ b/drivers/edac/qcom_edac.c
> @@ -0,0 +1,507 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/edac.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/smp.h>
> +#include <linux/regmap.h>
> +#include <linux/interrupt.h>
> +#include <linux/soc/qcom/llcc-qcom.h>

Please alphabetize these includes, and remove any unneeded ones.

> +#include "edac_mc.h"
> +#include "edac_device.h"
> +
> +#ifdef CONFIG_EDAC_QCOM_LLCC_PANIC_ON_UE
> +#define LLCC_ERP_PANIC_ON_UE            1
> +#else
> +#define LLCC_ERP_PANIC_ON_UE            0
> +#endif
> +
> +#define EDAC_LLCC                       "qcom_llcc"
> +
> +#define TRP_SYN_REG_CNT                 6
> +
> +#define DRP_SYN_REG_CNT                 8
> +
> +#define LLCC_COMMON_STATUS0             0x0003000C
> +#define LLCC_LB_CNT_MASK                GENMASK(31, 28)
> +#define LLCC_LB_CNT_SHIFT               28
> +
> +/* single & Double Bit syndrome register offsets */
> +#define TRP_ECC_SB_ERR_SYN0             0x0002304C
> +#define TRP_ECC_DB_ERR_SYN0             0x00020370
> +#define DRP_ECC_SB_ERR_SYN0             0x0004204C
> +#define DRP_ECC_DB_ERR_SYN0             0x00042070
> +
> +/* Error register offsets */
> +#define TRP_ECC_ERROR_STATUS1           0x00020348
> +#define TRP_ECC_ERROR_STATUS0           0x00020344
> +#define DRP_ECC_ERROR_STATUS1           0x00042048
> +#define DRP_ECC_ERROR_STATUS0           0x00042044
> +
> +/* TRP, DRP interrupt register offsets */
> +#define DRP_INTERRUPT_STATUS            0x00041000
> +#define TRP_INTERRUPT_0_STATUS          0x00020480
> +#define DRP_INTERRUPT_CLEAR             0x00041008
> +#define DRP_ECC_ERROR_CNTR_CLEAR        0x00040004
> +#define TRP_INTERRUPT_0_CLEAR           0x00020484
> +#define TRP_ECC_ERROR_CNTR_CLEAR        0x00020440
> +
> +/* Mask and shift macros */
> +#define ECC_DB_ERR_COUNT_MASK           GENMASK(4, 0)
> +#define ECC_DB_ERR_WAYS_MASK            GENMASK(31, 16)
> +#define ECC_DB_ERR_WAYS_SHIFT           BIT(4)
> +
> +#define ECC_SB_ERR_COUNT_MASK           GENMASK(23, 16)
> +#define ECC_SB_ERR_COUNT_SHIFT          BIT(4)
> +#define ECC_SB_ERR_WAYS_MASK            GENMASK(15, 0)
> +
> +#define SB_ECC_ERROR                    BIT(0)
> +#define DB_ECC_ERROR                    BIT(1)
> +
> +#define DRP_TRP_INT_CLEAR               GENMASK(1, 0)
> +#define DRP_TRP_CNT_CLEAR               GENMASK(1, 0)
> +
> +/* Config registers offsets*/
> +#define DRP_ECC_ERROR_CFG               0x00040000
> +
> +/* TRP, DRP interrupt register offsets */
> +#define CMN_INTERRUPT_0_ENABLE          0x0003001C
> +#define CMN_INTERRUPT_2_ENABLE          0x0003003C
> +#define TRP_INTERRUPT_0_ENABLE          0x00020488
> +#define DRP_INTERRUPT_ENABLE            0x0004100C
> +
> +#define SB_ERROR_THRESHOLD              0x1
> +#define SB_ERROR_THRESHOLD_SHIFT        24
> +#define SB_DB_TRP_INTERRUPT_ENABLE      0x3
> +#define TRP0_INTERRUPT_ENABLE           0x1
> +#define DRP0_INTERRUPT_ENABLE           BIT(6)
> +#define SB_DB_DRP_INTERRUPT_ENABLE      0x3
> +
> +
> +enum {
> +       LLCC_DRAM_CE = 0,
> +       LLCC_DRAM_UE,
> +       LLCC_TRAM_CE,
> +       LLCC_TRAM_UE,
> +};
> +
> +struct errors_edac {
> +       const char *msg;
> +       void (*func)(struct edac_device_ctl_info *edev_ctl,
> +                               int inst_nr, int block_nr, const char *msg);
> +};
> +
> +static const struct errors_edac errors[] = {
> +       {"LLCC Data RAM correctable Error", edac_device_handle_ce},
> +       {"LLCC Data RAM uncorrectable Error", edac_device_handle_ue},
> +       {"LLCC Tag RAM correctable Error", edac_device_handle_ce},
> +       {"LLCC Tag RAM uncorrectable Error", edac_device_handle_ue},
> +};
> +
> +static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
> +{
> +       u32 sb_err_threshold;
> +       int ret;
> +
> +       /* Enable TRP in instance 2 of common interrupt enable register */
> +       ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
> +                                TRP0_INTERRUPT_ENABLE,
> +                                TRP0_INTERRUPT_ENABLE);
> +       if (ret)
> +               return ret;
> +
> +       /* Enable ECC interrupts on Tag Ram */
> +       ret = regmap_update_bits(llcc_bcast_regmap, TRP_INTERRUPT_0_ENABLE,
> +                                SB_DB_TRP_INTERRUPT_ENABLE,
> +                                SB_DB_TRP_INTERRUPT_ENABLE);
> +       if (ret)
> +               return ret;
> +
> +       /* Enable SB error for Data RAM */
> +       sb_err_threshold = (SB_ERROR_THRESHOLD << SB_ERROR_THRESHOLD_SHIFT);
> +       ret = regmap_write(llcc_bcast_regmap, DRP_ECC_ERROR_CFG,
> +                          sb_err_threshold);
> +       if (ret)
> +               return ret;
> +
> +       /* Enable DRP in instance 2 of common interrupt enable register */
> +       ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
> +                                DRP0_INTERRUPT_ENABLE,
> +                                DRP0_INTERRUPT_ENABLE);
> +       if (ret)
> +               return ret;
> +
> +       /* Enable ECC interrupts on Data Ram */
> +       ret = regmap_write(llcc_bcast_regmap, DRP_INTERRUPT_ENABLE,
> +                          SB_DB_DRP_INTERRUPT_ENABLE);
> +       return ret;
> +}
> +
> +/* Clear the error interrupt and counter registers */
> +static int qcom_llcc_clear_errors(int err_type, struct llcc_drv_data *drv)
> +{
> +       int ret = 0;
> +
> +       switch (err_type) {
> +       case LLCC_DRAM_CE:
> +       case LLCC_DRAM_UE:
> +               /* Clear the interrupt */
> +               ret = regmap_write(drv->bcast_regmap, DRP_INTERRUPT_CLEAR,
> +                                  DRP_TRP_INT_CLEAR);
> +               if (ret)
> +                       return ret;
> +
> +               /* Clear the counters */
> +               ret = regmap_write(drv->bcast_regmap, DRP_ECC_ERROR_CNTR_CLEAR,
> +                                  DRP_TRP_CNT_CLEAR);
> +               if (ret)
> +                       return ret;
> +               break;
> +       case LLCC_TRAM_CE:
> +       case LLCC_TRAM_UE:
> +               ret = regmap_write(drv->bcast_regmap, TRP_INTERRUPT_0_CLEAR,
> +                                  DRP_TRP_INT_CLEAR);
> +               if (ret)
> +                       return ret;
> +
> +               ret = regmap_write(drv->bcast_regmap, TRP_ECC_ERROR_CNTR_CLEAR,
> +                                  DRP_TRP_CNT_CLEAR);
> +               if (ret)
> +                       return ret;
> +               break;
> +       }
> +       return ret;
> +}
> +
> +/* Dump syndrome registers for tag Ram Double bit errors */
> +static int dump_trp_db_syn_reg(struct llcc_drv_data *drv, u32 bank)
> +{
> +       int db_err_cnt, db_err_ways, ret, i;
> +       u32 synd_reg, synd_val;
> +
> +       for (i = 0; i < TRP_SYN_REG_CNT; i++) {
> +               synd_reg = TRP_ECC_DB_ERR_SYN0 + (i * 4);
> +               ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> +                                 &synd_val);
> +               if (ret)
> +                       return ret;
> +               edac_printk(KERN_CRIT, EDAC_LLCC, "TRP_ECC_SYN%d: 0x%8x\n",
> +                           i, synd_val);
> +       }
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + TRP_ECC_ERROR_STATUS1,
> +                         &db_err_cnt);
> +       if (ret)
> +               return ret;
> +       db_err_cnt = (db_err_cnt & ECC_DB_ERR_COUNT_MASK);
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Double-Bit error count: 0x%4x\n",
> +                   db_err_cnt);
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + TRP_ECC_ERROR_STATUS0,
> +                         &db_err_ways);
> +       if (ret)
> +               return ret;
> +       db_err_ways = (db_err_ways & ECC_DB_ERR_WAYS_MASK);
> +       db_err_ways >>= ECC_DB_ERR_WAYS_SHIFT;
> +
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Double-Bit error ways: 0x%4x\n",
> +                   db_err_ways);
> +
> +       return ret;
> +}
> +
> +/* Dump syndrome register for tag Ram Single Bit Errors */
> +static int dump_trp_sb_syn_reg(struct llcc_drv_data *drv, u32 bank)
> +{
> +       int sb_err_cnt, sb_err_ways, ret, i;
> +       u32 synd_reg, synd_val;
> +
> +       for (i = 0; i < TRP_SYN_REG_CNT; i++) {
> +               synd_reg = TRP_ECC_SB_ERR_SYN0 + (i * 4);
> +               ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> +                                 &synd_val);
> +               if (ret)
> +                       return ret;
> +               edac_printk(KERN_CRIT, EDAC_LLCC, "TRP_ECC_SYN%d: 0x%8x\n", i,
> +                           synd_val);
> +       }
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + TRP_ECC_ERROR_STATUS1,
> +                         &sb_err_cnt);
> +       if (ret)
> +               return ret;
> +       sb_err_cnt = (sb_err_cnt & ECC_SB_ERR_COUNT_MASK);
> +       sb_err_cnt >>= ECC_SB_ERR_COUNT_SHIFT;
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Single-Bit error count: 0x%4x\n",
> +                   sb_err_cnt);
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + TRP_ECC_ERROR_STATUS0,
> +                         &sb_err_ways);
> +       if (ret)
> +               return ret;
> +
> +       sb_err_ways = sb_err_ways & ECC_SB_ERR_WAYS_MASK;
> +
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Single-Bit error ways: 0x%4x\n",
> +                   sb_err_ways);
> +
> +       return ret;
> +}
> +
> +/* Dump syndrome registers for Data Ram Double bit errors */
> +static int dump_drp_db_syn_reg(struct llcc_drv_data *drv, u32 bank)
> +{
> +       int db_err_cnt, db_err_ways, ret, i;
> +       u32 synd_reg, synd_val;
> +
> +       for (i = 0; i < DRP_SYN_REG_CNT; i++) {
> +               synd_reg = DRP_ECC_DB_ERR_SYN0 + (i * 4);
> +               ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> +                                 &synd_val);
> +               if (ret)
> +                       return ret;
> +               edac_printk(KERN_CRIT, EDAC_LLCC, "DRP_ECC_SYN%d: 0x%8x\n", i,
> +                           synd_val);
> +       }
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + DRP_ECC_ERROR_STATUS1,
> +                         &db_err_cnt);
> +       if (ret)
> +               return ret;
> +       db_err_cnt = (db_err_cnt & ECC_DB_ERR_COUNT_MASK);
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Double-Bit error count: 0x%4x\n",
> +                   db_err_cnt);
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + DRP_ECC_ERROR_STATUS0,
> +                         &db_err_ways);
> +       if (ret)
> +               return ret;
> +       db_err_ways &= ECC_DB_ERR_WAYS_MASK;
> +       db_err_ways >>= ECC_DB_ERR_WAYS_SHIFT;
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Double-Bit error ways: 0x%4x\n",
> +                   db_err_ways);
> +
> +       return ret;
> +}
> +
> +/* Dump Syndrome registers for Data Ram Single bit errors*/
> +static int dump_drp_sb_syn_reg(struct llcc_drv_data *drv, u32 bank)
> +{
> +       int sb_err_cnt, sb_err_ways, ret, i;
> +       u32 synd_reg, synd_val;
> +
> +       for (i = 0; i < DRP_SYN_REG_CNT; i++) {
> +               synd_reg = DRP_ECC_SB_ERR_SYN0 + (i * 4);
> +               ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
> +                                 &synd_val);
> +               if (ret)
> +                       return ret;
> +               edac_printk(KERN_CRIT, EDAC_LLCC, "DRP_ECC_SYN%d: 0x%8x\n", i,
> +                           synd_val);
> +       }
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + DRP_ECC_ERROR_STATUS1,
> +                         &sb_err_cnt);
> +       if (ret)
> +               return ret;
> +       sb_err_cnt &= ECC_SB_ERR_COUNT_MASK;
> +       sb_err_cnt >>= ECC_SB_ERR_COUNT_SHIFT;
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Single-Bit error count: 0x%4x\n",
> +                   sb_err_cnt);
> +
> +       ret = regmap_read(drv->regmap,
> +                         drv->offsets[bank] + DRP_ECC_ERROR_STATUS0,
> +                         &sb_err_ways);
> +       if (ret)
> +               return ret;
> +       sb_err_ways = sb_err_ways & ECC_SB_ERR_WAYS_MASK;
> +
> +       edac_printk(KERN_CRIT, EDAC_LLCC, "Single-Bit error ways: 0x%4x\n",
> +                   sb_err_ways);
> +
> +       return ret;
> +}

As Borislav mentioned, dump_{trp,drp}_{db,sb}_syn_reg are basically
copy/pastes of each other with minor differences. I wonder if there's
a way to refactor this so that there's less boilerplate. Maybe a
helper function for the for loop, and maybe another one to read both
of the status registers (or optionally just one) might help. Or you
might do even better with a table, depending on how things shake out.

> +
> +static int dump_syn_reg(struct edac_device_ctl_info *edev_ctl,
> +                        int err_type, u32 bank)
> +{
> +       struct llcc_drv_data *drv = edev_ctl->pvt_info;
> +       int ret = 0;
> +
> +       switch (err_type) {
> +       case LLCC_DRAM_CE:
> +               ret = dump_drp_sb_syn_reg(drv, bank);
> +               break;
> +       case LLCC_DRAM_UE:
> +               ret = dump_drp_db_syn_reg(drv, bank);
> +               break;
> +       case LLCC_TRAM_CE:
> +               ret = dump_trp_sb_syn_reg(drv, bank);
> +               break;
> +       case LLCC_TRAM_UE:
> +               ret = dump_trp_db_syn_reg(drv, bank);
> +               break;
> +       }
> +       if (ret)
> +               return ret;
> +

If something fails and you return here without clearing errors, would
there be an interrupt storm?

> +       ret = qcom_llcc_clear_errors(err_type, drv);
> +       if (ret)
> +               return ret;
> +
> +       errors[err_type].func(edev_ctl, 0, bank, errors[err_type].msg);
> +
> +       return ret;
> +}
> +

Whoops, I clipped the rest of this message already, but in probe, the
type of ecc_irq should be int. Also, in patch 2 you directly assigned
platform_get_irq into the ecc_irq member, so the if (!ecc_irq) logic
in probe doesn't quite work if platform_get_irq returns a negative
number. Is 0 a valid irq number? I don't know.



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux