Add PON and pwrkey as child nodes for PON device. Also
add additional properties for pwrkey i.e., linux,code
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8916.dtsi | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 196b1c0ceb9b..15a37cbcd216 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
@@ -18,12 +19,19 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pm8916_gpios: gpios@c000 {
--
2.14.4
