[PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.

The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.

Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt |   3 +-
 drivers/cpufreq/Kconfig.arm                        |   2 +-
 drivers/cpufreq/cpufreq-dt-platdev.c               |   5 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c               | 151 +++++++++++++++++++--
 4 files changed, 149 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index 6dcdfcd..7bc0f1a 100644
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -19,7 +19,8 @@ In 'cpus' nodes:
 
 In 'operating-points-v2' table:
 - compatible: Should be
-	- 'operating-points-v2-qcom-cpu' for apq8096 and msm8996.
+	- 'operating-points-v2-qcom-cpu' for apq8096, msm8996, msm8974,
+					     apq8064, msm8960 and ipq8074.
 - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
 		efuse registers that has information about the
 		speedbin that is used to select the right frequency/voltage
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 13fbd97..497ae89 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -126,7 +126,7 @@ config ARM_OMAP2PLUS_CPUFREQ
 
 config ARM_QCOM_CPUFREQ_NVMEM
 	tristate "Qualcomm nvmem based CPUFreq"
-	depends on ARM64
+	depends on ARCH_QCOM
 	depends on QCOM_QFPROM
 	depends on QCOM_SMEM
 	select PM_OPP
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index fe14c57..917cdc2 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -128,6 +128,11 @@
 	{ .compatible = "ti,am43", },
 	{ .compatible = "ti,dra7", },
 
+	{ .compatible = "qcom,ipq8064", },
+	{ .compatible = "qcom,apq8064", },
+	{ .compatible = "qcom,msm8974", },
+	{ .compatible = "qcom,msm8960", },
+
 	{ }
 };
 
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 0ad8e5b..5f2add0 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -45,6 +45,82 @@ enum _msm8996_version {
 
 static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
 
+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver,
+					  struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+	u32 pte_efuse;
+
+	pte_efuse = *((u32 *)buf);
+
+	*speed = pte_efuse & 0xf;
+	if (*speed == 0xf)
+		*speed = (pte_efuse >> 4) & 0xf;
+
+	if (*speed == 0xf) {
+		*speed = 0;
+		pr_warn("Speed bin: Defaulting to %d\n", *speed);
+	} else {
+		pr_info("Speed bin: %d\n", *speed);
+	}
+
+	*pvs = (pte_efuse >> 10) & 0x7;
+	if (*pvs == 0x7)
+		*pvs = (pte_efuse >> 13) & 0x7;
+
+	if (*pvs == 0x7) {
+		*pvs = 0;
+		pr_warn("PVS bin: Defaulting to %d\n", *pvs);
+	} else {
+		pr_info("PVS bin: %d\n", *pvs);
+	}
+
+	kfree(buf);
+}
+
+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver,
+					  struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+	u32 pte_efuse, redundant_sel;
+
+	pte_efuse = *((u32 *)buf);
+	redundant_sel = (pte_efuse >> 24) & 0x7;
+	*speed = pte_efuse & 0x7;
+
+	/* 4 bits of PVS are in efuse register bits 31, 8-6. */
+	*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+	*pvs_ver = (pte_efuse >> 4) & 0x3;
+
+	switch (redundant_sel) {
+	case 1:
+		*speed = (pte_efuse >> 27) & 0xf;
+		break;
+	case 2:
+		*pvs = (pte_efuse >> 27) & 0xf;
+		break;
+	}
+
+	/* Check SPEED_BIN_BLOW_STATUS */
+	if (pte_efuse & BIT(3)) {
+		pr_info("Speed bin: %d\n", *speed);
+	} else {
+		pr_warn("Speed bin not set. Defaulting to 0!\n");
+		*speed = 0;
+	}
+
+	/* Check PVS_BLOW_STATUS */
+	pte_efuse = *(((u32 *)buf) + 4);
+	pte_efuse &= BIT(21);
+	if (pte_efuse) {
+		pr_info("PVS bin: %d\n", *pvs);
+	} else {
+		pr_warn("PVS bin not set. Defaulting to 0!\n");
+		*pvs = 0;
+	}
+
+	pr_info("PVS version: %d\n", *pvs_ver);
+	kfree(buf);
+}
+
 static enum _msm8996_version __init qcom_cpufreq_get_msm_id(void)
 {
 	size_t len;
@@ -74,6 +150,35 @@ static enum _msm8996_version __init qcom_cpufreq_get_msm_id(void)
 	return version;
 }
 
+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
+					   struct nvmem_cell *speedbin_nvmem,
+					   char **name,
+					   u32 *versions)
+{
+	int speed = 0, pvs = 0, pvs_ver = 0;
+	u8 *buf;
+	size_t len;
+
+	buf = nvmem_cell_read(speedbin_nvmem, &len);
+	if (len == 4) {
+		get_krait_bin_format_a(&speed, &pvs, &pvs_ver,
+				       speedbin_nvmem, buf);
+	} else if (len == 8) {
+		get_krait_bin_format_b(&speed, &pvs, &pvs_ver,
+				       speedbin_nvmem, buf);
+	} else {
+		dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
+		return -ENODEV;
+	}
+
+	snprintf(*name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
+		 speed, pvs, pvs_ver);
+
+	*versions = (1 << speed);
+
+	return 0;
+}
+
 static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 					  struct nvmem_cell *speedbin_nvmem,
 					  char **pvs_name,
@@ -83,6 +188,7 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 	u8 *speedbin;
 	enum _msm8996_version msm8996_version;
 
+	*pvs_name = NULL;
 	msm8996_version = qcom_cpufreq_get_msm_id();
 	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
 		dev_err(cpu_dev, "Not Snapdragon 820/821!");
@@ -111,7 +217,7 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 
 static int qcom_cpufreq_probe(struct platform_device *pdev)
 {
-	struct opp_table *opp_tables[NR_CPUS] = { NULL };
+	struct opp_table *tbl1[NR_CPUS] = { NULL }, *tbl2[NR_CPUS] = { NULL };
 	int (*get_version)(struct device *cpu_dev,
 			   struct nvmem_cell *speedbin_nvmem,
 			   char **name, int *versions);
@@ -120,8 +226,8 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	struct device *cpu_dev;
 	unsigned cpu;
 	u32 versions;
-	char *pvs_name = NULL;
 	const struct of_device_id *match;
+	char *pvs_name = "speedXX-pvsXX-vXX";
 	int ret;
 
 	cpu_dev = get_cpu_device(0);
@@ -163,10 +269,19 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 			goto free_opp;
 		}
 
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
+		if (pvs_name) {
+			tbl1[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name);
+			if (IS_ERR(tbl1[cpu])) {
+				ret = PTR_ERR(tbl1[cpu]);
+				dev_err(cpu_dev, "Failed to add OPP name %s\n",
+					pvs_name);
+				goto free_opp;
+			}
+		}
+
+		tbl2[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, &versions, 1);
+		if (IS_ERR(tbl2[cpu])) {
+			ret = PTR_ERR(tbl2[cpu]);
 			dev_err(cpu_dev, "Failed to set supported hardware\n");
 			goto free_opp;
 		}
@@ -182,9 +297,15 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 
 free_opp:
 	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+		if (IS_ERR_OR_NULL(tbl1[cpu]))
+			break;
+		dev_pm_opp_put_prop_name(tbl1[cpu]);
+	}
+
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(tbl2[cpu]))
 			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
+		dev_pm_opp_put_supported_hw(tbl2[cpu]);
 	}
 
 	return ret;
@@ -205,8 +326,18 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
 };
 
 static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096", .data = qcom_cpufreq_kryo_name_version},
-	{ .compatible = "qcom,msm8996", .data = qcom_cpufreq_kryo_name_version},
+	{ .compatible = "qcom,apq8096",
+	  .data = qcom_cpufreq_kryo_name_version},
+	{ .compatible = "qcom,msm8996",
+	  .data = qcom_cpufreq_kryo_name_version},
+	{ .compatible = "qcom,ipq8064",
+	  .data = qcom_cpufreq_krait_name_version },
+	{ .compatible = "qcom,apq8064",
+	  .data = qcom_cpufreq_krait_name_version },
+	{ .compatible = "qcom,msm8974",
+	  .data = qcom_cpufreq_krait_name_version },
+	{ .compatible = "qcom,msm8960",
+	  .data = qcom_cpufreq_krait_name_version },
 	{},
 };
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux