On 9/5/2018 4:52 AM, Venkata Narendra Kumar Gutta wrote:
Add reg-names and interrupts for LLCC documentation and the usage
examples. llcc broadcast base is added in addition to llcc base,
which is used for llcc broadcast writes.
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@xxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/arm/msm/qcom,llcc.txt | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
index 5e85749..2e007dc 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
- reg:
Usage: required
Value Type: <prop-encoded-array>
- Definition: Start address and the the size of the register region.
+ Definition: The first element specifies the llcc base start address and
+ the size of the register region. The second element specifies
+ the llcc broadcast base address and size of the register region.
+
+- reg-names:
+ Usage: required
+ Value Type: <stringlist>
+ Definition: Register region names. Must be "llcc_base", "llcc_bcast_base".
+
+- interrupts:
+ Usage: required
+ Definition: The interrupt is associated with the llcc edac device.
+ It's used for llcc cache single and double bit error detection
+ and reporting.
Example:
cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
- reg = <0x1100000 0x250000>;
+ reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+ reg-names = "llcc_base", "llcc_bcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
Also, llcc_bcast_base should be llcc_broadcast_base as given in Patch 1
or you can change to llcc_bcast_base in Patch 1 of series.
