On Mon, Jun 18 2018 at 07:37 -0600, Raju P L S S S N wrote:
From: Lina Iyer <ilina@xxxxxxxxxxxxxx> Sending RPMH requests and waiting for response from the controller through a callback is common functionality across all platform drivers. To simplify drivers, add a library functions to create RPMH client and send resource state requests. rpmh_write() is a synchronous blocking call that can be used to send active state requests. Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@xxxxxxxxxxxxxx> --- Changes in v11: - move rpmh_request to rpmh-internal.h - Associate rpmh_ctrl to rsc_drv - Remove EXPORT_SYMBOL for rpmh_tx_done Changes in v10: - Remove rsc_drv_list - Add EXPORT_SYMBOL Changes in v9: - Remove EXPORT_SYMBOL - add WARN_ON if response fails Changes in v7: - Optimization and locking fixes Changes in v6: - replace rpmh_client with device - inline wait_for_tx_done() Changes in v4: - use const struct tcs_cmd in API - remove wait count from this patch - changed -EFAULT to -EINVAL --- drivers/soc/qcom/Makefile | 4 +- drivers/soc/qcom/rpmh-internal.h | 31 ++++++++++- drivers/soc/qcom/rpmh-rsc.c | 4 ++ drivers/soc/qcom/rpmh.c | 116 +++++++++++++++++++++++++++++++++++++++ include/soc/qcom/rpmh.h | 25 +++++++++ 5 files changed, 178 insertions(+), 2 deletions(-) create mode 100644 drivers/soc/qcom/rpmh.c create mode 100644 include/soc/qcom/rpmh.h diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index cb6300f..bb395c3 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -7,7 +7,9 @@ obj-$(CONFIG_QCOM_PM) += spm.o obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o qmi_helpers-y += qmi_encdec.o qmi_interface.o obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o -obj-$(CONFIG_QCOM_RPMH) += rpmh-rsc.o +obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o +qcom_rpmh-y += rpmh-rsc.o +qcom_rpmh-y += rpmh.o obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o obj-$(CONFIG_QCOM_SMEM) += smem.o obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h index cc29176..f8e0f2a 100644 --- a/drivers/soc/qcom/rpmh-internal.h +++ b/drivers/soc/qcom/rpmh-internal.h @@ -42,6 +42,32 @@ struct tcs_group { }; /** + * struct rpmh_request: the message to be sent to rpmh-rsc + * + * @msg: the request + * @cmd: the payload that will be part of the @msg + * @completion: triggered when request is done + * @dev: the device making the request + * @err: err return from the controller + */ +struct rpmh_request { + struct tcs_request msg; + struct tcs_cmd cmd[MAX_RPMH_PAYLOAD]; + struct completion *completion; + const struct device *dev; + int err; +}; + +/** + * struct rpmh_ctrlr: our representation of the controller + * + * @drv: the controller instance + */ +struct rpmh_ctrlr { + struct rsc_drv *drv; +}; + +/** * struct rsc_drv: the Direct Resource Voter (DRV) of the * Resource State Coordinator controller (RSC) * @@ -52,6 +78,7 @@ struct tcs_group { * @tcs: TCS groups * @tcs_in_use: s/w state of the TCS * @lock: synchronize state of the controller + * @ctrl: controller to handle cases like batch requests
This is not only for batch requests. This is handle to the DRV's client. @client might be a better name than @ctrlr. Thanks, Lina
*/ struct rsc_drv { const char *name; @@ -61,9 +88,11 @@ struct rsc_drv { struct tcs_group tcs[TCS_TYPE_NR]; DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR); spinlock_t lock; + struct rpmh_ctrlr ctrlr; }; - int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg); +void rpmh_tx_done(const struct tcs_request *msg, int r); + #endif /* __RPM_INTERNAL_H__ */ diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index 89d41cd..59fa41f 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -175,6 +175,8 @@ static irqreturn_t tcs_tx_done(int irq, void *p) spin_lock(&drv->lock); clear_bit(i, drv->tcs_in_use); spin_unlock(&drv->lock); + if (req) + rpmh_tx_done(req, err); } return IRQ_HANDLED; @@ -467,6 +469,8 @@ static int rpmh_rsc_probe(struct platform_device *pdev) /* Enable the active TCS to send requests immediately */ write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, drv->tcs[ACTIVE_TCS].mask); + dev_set_drvdata(&pdev->dev, drv); + return devm_of_platform_populate(&pdev->dev); } diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c new file mode 100644 index 0000000..969f1d5 --- /dev/null +++ b/drivers/soc/qcom/rpmh.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/atomic.h> +#include <linux/bug.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/wait.h> + +#include <soc/qcom/rpmh.h> + +#include "rpmh-internal.h" + +#define RPMH_TIMEOUT_MS msecs_to_jiffies(10000) + +#define DEFINE_RPMH_MSG_ONSTACK(dev, s, q, name) \ + struct rpmh_request name = { \ + .msg = { \ + .state = s, \ + .cmds = name.cmd, \ + .num_cmds = 0, \ + .wait_for_compl = true, \ + }, \ + .cmd = { { 0 } }, \ + .completion = q, \ + .dev = dev, \ + } + +#define ctrlr_to_drv(ctrlr) container_of(ctrlr, struct rsc_drv, ctrlr) + +static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct device *dev) +{ + struct rsc_drv *drv = dev_get_drvdata(dev->parent); + + return &drv->ctrlr; +} + +void rpmh_tx_done(const struct tcs_request *msg, int r) +{ + struct rpmh_request *rpm_msg = container_of(msg, struct rpmh_request, + msg); + struct completion *compl = rpm_msg->completion; + + rpm_msg->err = r; + + if (r) + dev_err(rpm_msg->dev, "RPMH TX fail in msg addr=%#x, err=%d\n", + rpm_msg->msg.cmds[0].addr, r); + + /* Signal the blocking thread we are done */ + if (compl) + complete(compl); +} + +/** + * __rpmh_write: send the RPMH request + * + * @dev: The device making the request + * @state: Active/Sleep request type + * @rpm_msg: The data that needs to be sent (cmds). + */ +static int __rpmh_write(const struct device *dev, enum rpmh_state state, + struct rpmh_request *rpm_msg) +{ + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev); + + rpm_msg->msg.state = state; + + if (state != RPMH_ACTIVE_ONLY_STATE) + return -EINVAL; + + WARN_ON(irqs_disabled()); + + return rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg); +} + +/** + * rpmh_write: Write a set of RPMH commands and block until response + * + * @rc: The RPMH handle got from rpmh_get_client + * @state: Active/sleep set + * @cmd: The payload data + * @n: The number of elements in @cmd + * + * May sleep. Do not call from atomic contexts. + */ +int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ + DECLARE_COMPLETION_ONSTACK(compl); + DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg); + int ret; + + if (!cmd || !n || n > MAX_RPMH_PAYLOAD) + return -EINVAL; + + memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd)); + rpm_msg.msg.num_cmds = n; + + ret = __rpmh_write(dev, state, &rpm_msg); + if (ret) + return ret; + + ret = wait_for_completion_timeout(&compl, RPMH_TIMEOUT_MS); + WARN_ON(!ret); + return (ret > 0) ? 0 : -ETIMEDOUT; +} +EXPORT_SYMBOL(rpmh_write); diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h new file mode 100644 index 0000000..c1d0f90 --- /dev/null +++ b/include/soc/qcom/rpmh.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + +#ifndef __SOC_QCOM_RPMH_H__ +#define __SOC_QCOM_RPMH_H__ + +#include <soc/qcom/tcs.h> +#include <linux/platform_device.h> + + +#if IS_ENABLED(CONFIG_QCOM_RPMH) +int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n); + +#else + +static inline int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ return -ENODEV; } + +#endif /* CONFIG_QCOM_RPMH */ + +#endif /* __SOC_QCOM_RPMH_H__ */ -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
-- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html