On Fri, 20 Jul 2018 11:36:35 -0600
Rob Herring <robh@xxxxxxxxxx> wrote:
> On Tue, Jul 17, 2018 at 04:41:54AM -0400, Brian Masney wrote:
> > This patch adds support for optionally reading the prox_diode and
> > prox_power settings from device tree. This was tested using a LG
> > Nexus 5 (hammerhead) which requires a different diode than the driver
> > default for the IR LED.
> >
> > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> > ---
> > The next patch in the series removes the tsl2772 driver from the
> > trivial-devices.txt file. I separated it out so that change can go
> > through device tree.
> >
> > .../devicetree/bindings/iio/light/tsl2772.txt | 39 +++++++++++++++++++
>
> Please split DT bindings to separate patch.
>
> > drivers/iio/light/tsl2772.c | 16 ++++++++
> > include/dt-bindings/iio/amstaos,tsl2772.h | 24 ++++++++++++
> > 3 files changed, 79 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > create mode 100644 include/dt-bindings/iio/amstaos,tsl2772.h
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > new file mode 100644
> > index 000000000000..ab553d52b9fc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > @@ -0,0 +1,39 @@
> > +* AMS/TAOS ALS and proximity sensor
> > +
> > +Required properties:
> > +
> > + - compatible: Should be one of
> > + "amstaos,tsl2571"
> > + "amstaos,tsl2671"
> > + "amstaos,tmd2671"
> > + "amstaos,tsl2771"
> > + "amstaos,tmd2771"
> > + "amstaos,tsl2572"
> > + "amstaos,tsl2672"
> > + "amstaos,tmd2672"
> > + "amstaos,tsl2772"
> > + "amstaos,tmd2772"
> > + - reg: the I2C address of the device
> > +
> > +Optional properties:
> > +
> > + - amstaos,prox_diode - must be TSL2772_DIODE0, TSL2772_DIODE1, or
> > + TSL2772_DIODE_BOTH.
>
> s/_/-/
>
> > + - amstaos,prox_power - must be TSL2772_100_mA, TSL2772_50_mA, TSL2772_25_mA,
> > + or TSL2772_13_mA.
>
> I wonder if this should be common. Perhaps we should use the existing
> 'led-max-microamp' as this is setting the current for an IR LED.
Seems reasonable, then perhaps have two controls to turn on the diodes
above.
>
> And while called 'power' this setting is current.
Also can we have real values? I really don't like defines if they
aren't absolutely necessary - particularly when there is a nice real
unit to be used.
>
> > + - interrupt-parent: should be the phandle for the interrupt controller
>
> Don't need to document this. It's implied by interrupts (and could be in
> a parent node).
>
> > + - interrupts: the sole interrupt generated by the device
> > +
> > + Refer to interrupt-controller/interrupts.txt for generic interrupt client
> > + node bindings.
> > +
> > +Example:
> > +
> > +#include <dt-bindings/iio/amstaos,tsl2772.h>
> > +
> > +tsl2772@39 {
> > + compatible = "amstaos,tsl2772";
> > + reg = <0x39>;
> > + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
> > + amstaos,prox_diode = <TSL2772_DIODE0>;
> > +};
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
