Hi Rob,
On Wed, Jun 6, 2018 at 6:08 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Sat, Jun 02, 2018 at 01:56:08AM +0530, Vikash Garodia wrote:
> > A separate child device is added for video firmware.
> > This is needed to
> > [1] configure the firmware context bank with the desired SID.
> > [2] ensure that the iova for firmware region is from 0x0.
> >
> > Signed-off-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/media/qcom,venus.txt | 8 +++-
> > drivers/media/platform/qcom/venus/core.c | 48 +++++++++++++++++++---
> > drivers/media/platform/qcom/venus/firmware.c | 20 ++++++++-
> > drivers/media/platform/qcom/venus/firmware.h | 2 +
> > 4 files changed, 71 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
> > index 00d0d1b..701cbe8 100644
> > --- a/Documentation/devicetree/bindings/media/qcom,venus.txt
> > +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
> > @@ -53,7 +53,7 @@
> >
> > * Subnodes
> > The Venus video-codec node must contain two subnodes representing
> > -video-decoder and video-encoder.
> > +video-decoder and video-encoder, one optional firmware subnode.
> >
> > Every of video-encoder or video-decoder subnode should have:
> >
> > @@ -79,6 +79,8 @@ Every of video-encoder or video-decoder subnode should have:
> > power domain which is responsible for collapsing
> > and restoring power to the subcore.
> >
> > +The firmware sub node must contain the iommus specifiers for ARM9.
> > +
> > * An Example
> > video-codec@1d00000 {
> > compatible = "qcom,msm8916-venus";
> > @@ -105,4 +107,8 @@ Every of video-encoder or video-decoder subnode should have:
> > clock-names = "core";
> > power-domains = <&mmcc VENUS_CORE1_GDSC>;
> > };
> > + venus-firmware {
> > + compatible = "qcom,venus-firmware-no-tz";
> > + iommus = <&apps_smmu 0x10b2 0x0>;
>
> This mostly looks like you are adding a node in order to create a
> platform device. DT is not the only way to create platform devices and
> shouldn't be used when the device is not really a separate h/w device.
> Plus it seems like it is debatable that you even need a driver.
>
> For iommus, just move it up to the parent (or add to existing prop).
As far as I understood the issue from reading this series and also
talking a bit with Stanimir, there are multiple (physical?) ports from
the Venus hardware block and that includes one dedicated for firmware
loading, which has IOVA range restrictions up to 6 MiBs or something
like that.
If we add the firmware port to the iommus property of the main node,
we would bind it to the same IOVA address space as the other ports and
so it would be part of the main full 32-bit IOMMU domain.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
