Re: [PATCH v8 04/10] drivers: qcom: rpmh: add RPMH helper functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 5/15/2018 11:52 PM, Doug Anderson wrote:
Hi,

On Tue, May 15, 2018 at 10:47 AM, Lina Iyer <ilina@xxxxxxxxxxxxxx> wrote:
On Fri, May 11 2018 at 14:17 -0600, Doug Anderson wrote:

Hi,

On Wed, May 9, 2018 at 10:01 AM, Lina Iyer <ilina@xxxxxxxxxxxxxx> wrote:

+int rpmh_write(const struct device *dev, enum rpmh_state state,
+              const struct tcs_cmd *cmd, u32 n)
+{
+       DECLARE_COMPLETION_ONSTACK(compl);
+       DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg);
+       int ret;
+
+       if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
+               return -EINVAL;
+
+       memcpy(rpm_msg.cmd, cmd, n * sizeof(*cmd));
+       rpm_msg.msg.num_cmds = n;
+
+       ret = __rpmh_write(dev, state, &rpm_msg);
+       if (ret)
+               return ret;
+
+       ret = wait_for_completion_timeout(&compl, RPMH_TIMEOUT_MS);


IMO it's almost never a good idea to use wait_for_completion_timeout()
together with a completion that's declared on the stack.  If you
somehow insist that this is a good idea then I need to see incredibly
clear and obvious code/comments that say why it's impossible that the
process might somehow try to signal the completion _after_
RPMH_TIMEOUT_MS has expired.

Specifically if the timeout happens but the process could still signal
a completion later then they will access random data on the stack of a
function that has already returned.  This causes ridiculously
difficult-to-debug crashes.


NOTE: You've got timeout set to 10 seconds here.  Is that really even
useful?  IMO just call wait_for_completion() without a timeout.  It's
much better to have a nice clean hang than a random stack corruption.


The 10 sec timeout will guarantee that we will not get a response at all
anymore for the request. Usually requests can be considered failed if
there is no response in a few tens of microseconds. 10 sec is just an
arbitarily large number.

The reason we use timeout is that once the timeout happens, we know we
have failed, we could trigger a watchdog or crash the system. This is
very important for our productization in debugging RPMH failures. A
hang would not always trigger a watchdog and the failure would be silent
and possibly fatal but hard to debug.

If you intend the system to crash when this timeout happens then IMHO
add a BUG_ON.  Then I won't worry about something coming around later
and clobbering the stack.

-Doug


Sure. Will add BUG_ON in next patch.

Thanks,
Raju.
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux