On 2018-06-20 14:53, Sricharan R wrote:
Fix all nodes to use proper GIC_* macros for the interrupt type and the
interrupt trigger settings to avoid the boot warnings.
Thanks Sricharan for fixing these warnings.
Applied over 4.18 rc1 and tested in IPQ8064 AP148 board.
No backtraces are coming during boottime and IRQ seems OK.
root@OpenWrt:/# cat /proc/interrupts
CPU0 CPU1
16: 2602 4750 GIC-0 18 Edge gp_timer
17: 0 0 GIC-0 26 Level arm-pmu
23: 19 0 GIC-0 241 Level ahci[29000000.sata]
24: 912 0 GIC-0 184 Level msm_serial0
25: 113 0 GIC-0 185 Level i2c_qup
26: 6 0 GIC-0 187 Level 1a280000.spi
IPI0: 0 0 CPU wakeup interrupts
IPI1: 0 0 Timer broadcast interrupts
IPI2: 2045 1713 Rescheduling interrupts
IPI3: 1 4 Function call interrupts
IPI4: 0 0 CPU stop interrupts
IPI5: 0 0 IRQ work interrupts
IPI6: 0 0 completion interrupts
Err: 0
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
Tested-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
