Andy, Eduardo: Please consider this a gentle ping to understand how
this will get merged.
Andy, I guess you'll take the DT patches 2,4 and 7 and the rest will
go through Eduardo's thermal tree?
Regards,
Amit
On Wed, Jul 18, 2018 at 12:13 PM, Amit Kucheria
<amit.kucheria@xxxxxxxxxx> wrote:
> Here is a repost of the series. There have been no code changes since v6,
> just improving comments, patch descriptions, documentation. The series does
> the following:
> - Some code moves to allow code sharing between different SoCs with v2 of
> the TSENS IP,
> - a generic qcom,tsens-v2 property as a fallback compatible for all v2.x.y
> platforms,
> - new platform support (sdm845)
> - a cleanup patch and
> - a DT change to have a common way to deal with the SROT and TM registers
> despite slightly different features across the IP family and different
> register offsets.
>
> Changes since v7:
> - Fix couple of typos in spelling
> - Add review tags
> - Move the DT documentation patch before the code changes
>
> Changes since v6:
> - Fix comments and patch descriptions as per Doug's review
> - Rename tsens to thermal-sensor in DT
> - Add various review tags
>
> Changes since v5:
> - Actually fix unit addressses for the two tsens blocks as per Stephen's
> comment.
>
> Changes since v4:
> - Revert back to a single fallback bindind qcom,tsens-v2 as per Rob's
> suggestion.
> - Rework how old (unsplit SROT and TM address space) DTs are handled by
> needing a 0x1000 offset but still sharing common code in tsens-v2.c
> - Remove the patch to added TRDY checks while we investigate Matthias'
> reports
> - Fix unit addressses for the two tsens blocks as per Stephen's comment.
>
> Changes since v3:
> - Introduce qcom,tsens-v2.4.0 property and make qcom,tsens-v2 a
> fallback, compatible property.
> - Rename ops_v2 to ops_generic_v2
>
> Changes since v2:
>
> - Based on review, moved tsens-8996.c to tsens-v2.c and changed
> corresponding function names, struct names to allow for generic tsensv2
> platforms
> - All v2 platforms will now only need to use the qcom,tsen-v2
> property
> - Added a DT patch to initialize tsens driver on sdm845, now that
> 4.18-rc1 will contain an sdm845.dtsi
>
> Changes since v1:
> - Move get_temp() from tsens-8996 to tsens-common and rename
> - Change 8996 DT entry to allow init_common() to work across
> sdm845 and 8996 due to different offsets
>
> Amit Kucheria (7):
> thermal: tsens: Get rid of unused fields in structure
> dt: thermal: tsens: Document the fallback DT property for v2 of TSENS
> IP
> thermal: tsens: Add support to split up register address space into
> two
> arm64: dts: msm8996: thermal: Initialise via DT and add second
> controller
> thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
> thermal: tsens: Add generic support for TSENS v2 IP
> arm64: dts: sdm845: Add tsens nodes
>
> .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++----
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 14 ++++++++--
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 +++++++++++
> drivers/thermal/qcom/Makefile | 2 +-
> drivers/thermal/qcom/tsens-common.c | 12 ++++++++
> drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 32 ++++++++++------------
> drivers/thermal/qcom/tsens.c | 3 ++
> drivers/thermal/qcom/tsens.h | 8 ++++--
> 8 files changed, 88 insertions(+), 30 deletions(-)
> rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (64%)
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
