On 19/05/18 12:35, Ilia Lin wrote:
> In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
> the CPU frequency subset and voltage value of each OPP varies
> based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
> defines the voltage and frequency value based on the msm-id in SMEM
> and speedbin blown in the efuse combination.
> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
> to provide the OPP framework with required information.
> This is used to determine the voltage and frequency value for each OPP of
> operating-points-v2 table when it is parsed by the OPP framework.
>
> Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
> Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> ---
> drivers/cpufreq/Kconfig.arm | 10 +++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
> drivers/cpufreq/qcom-cpufreq-kryo.c | 164 +++++++++++++++++++++++++++++++++++
> 4 files changed, 178 insertions(+)
> create mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
>
[..]
> +
> +/*
> + * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
> + * the CPU frequency subset and voltage value of each OPP varies
> + * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
> + * defines the voltage and frequency value based on the msm-id in SMEM
> + * and speedbin blown in the efuse combination.
> + * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
> + * to provide the OPP framework with required information.
> + * This is used to determine the voltage and frequency value for each OPP of
> + * operating-points-v2 table when it is parsed by the OPP framework.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_opp.h>
> +#include <linux/slab.h>
> +#include <linux/soc/qcom/smem.h>
> +
> +#define MSM_ID_SMEM 137
> +#define SILVER_LEAD 0
> +#define GOLD_LEAD 2
> +
So I gather form other emails, that these are physical cpu number(not
even unique identifier like MPIDR). Will this work on parts or platforms
that need to boot in GOLD LEAD cpus.
[...]
> +
> +static int __init qcom_cpufreq_kryo_driver_init(void)
> +{
> + struct device *cpu_dev_silver, *cpu_dev_gold;
> + struct opp_table *opp_silver, *opp_gold;
> + enum _msm8996_version msm8996_version;
> + struct nvmem_cell *speedbin_nvmem;
> + struct platform_device *pdev;
> + struct device_node *np;
> + u8 *speedbin;
> + u32 versions;
> + size_t len;
> + int ret;
> +
> + cpu_dev_silver = get_cpu_device(SILVER_LEAD);
> + if (IS_ERR_OR_NULL(cpu_dev_silver))
> + return PTR_ERR(cpu_dev_silver);
> +
> + cpu_dev_gold = get_cpu_device(SILVER_LEAD);
s/SILVER/GOLD/ ?
--
Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
