From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx> On some devices (MSM8974 for example), the HFPLLs are instantiated within the Krait processor subsystem as separate register regions. Add a driver for these PLLs so that we can provide HFPLL clocks for use by the system. Cc: <devicetree@xxxxxxxxxxxxxxx> Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx> --- drivers/clk/qcom/Kconfig | 8 ++++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/hfpll.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 drivers/clk/qcom/hfpll.c diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 9c3480d..95f9980 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -253,3 +253,11 @@ config SPMI_PMIC_CLKDIV Technologies, Inc. SPMI PMIC. It configures the frequency of clkdiv outputs of the PMIC. These clocks are typically wired through alternate functions on GPIO pins. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + depends on COMMON_CLK_QCOM + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 1331ed7..d486aa3 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o +obj-$(CONFIG_QCOM_HFPLL) += hfpll.o diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c new file mode 100644 index 0000000..a6de7101 --- /dev/null +++ b/drivers/clk/qcom/hfpll.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> + +#include "clk-regmap.h" +#include "clk-hfpll.h" + +static const struct hfpll_data hdata = { + .mode_reg = 0x00, + .l_reg = 0x04, + .m_reg = 0x08, + .n_reg = 0x0c, + .user_reg = 0x10, + .config_reg = 0x14, + .config_val = 0x430405d, + .status_reg = 0x1c, + .lock_bit = 16, + + .user_val = 0x8, + .user_vco_mask = 0x100000, + .low_vco_max_rate = 1248000000, + .min_rate = 537600000UL, + .max_rate = 2900000000UL, +}; + +static const struct of_device_id qcom_hfpll_match_table[] = { + { .compatible = "qcom,hfpll" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); + +static const struct regmap_config hfpll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x30, + .fast_io = true, +}; + +static int qcom_hfpll_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *regmap; + struct clk_hfpll *h; + struct clk_init_data init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_ops_hfpll, + }; + + h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); + if (!h) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + if (of_property_read_string_index(dev->of_node, "clock-output-names", + 0, &init.name)) + return -ENODEV; + + h->d = &hdata; + h->clkr.hw.init = &init; + spin_lock_init(&h->lock); + + return devm_clk_register_regmap(&pdev->dev, &h->clkr); +} + +static struct platform_driver qcom_hfpll_driver = { + .probe = qcom_hfpll_probe, + .driver = { + .name = "qcom-hfpll", + .of_match_table = qcom_hfpll_match_table, + }, +}; +module_platform_driver(qcom_hfpll_driver); + +MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:qcom-hfpll"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html