Hi Doug,
Please find my comments inline.
On 7/18/2018 11:34 PM, Douglas Anderson wrote:
Add both the interface and core clock.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
drivers/clk/qcom/gcc-sdm845.c | 73 +++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 0f694ed4238a..2ee96f9bc217 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -162,6 +162,20 @@ static const char * const gcc_parent_names_10[] = {
"core_bi_pll_test_se",
};
+static const struct parent_map gcc_parent_map_9[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPLL0_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_EVEN, 6 },
+ { P_SLEEP_CLK, 7 },
SRC 7 has 'core_bi_pll_test_se' and not 'sleep_clk'.
Please use the 'gcc_parent_map_0'
+};
+
+static const char * const gcc_parent_names_9[] = {
+ "bi_tcxo",
+ "gpll0",
+ "gpll0_out_even",
+ "core_pi_sleep_clk",
+};
+
static struct clk_alpha_pll gpll0 = {
.offset = 0x0,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
@@ -358,6 +372,31 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
},
};
+static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+ F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+ F(100000000, P_GPLL0_OUT_EVEN, 3, 0, 0),
Is SW planning to use this frequency?
+ F(150000000, P_GPLL0_OUT_EVEN, 2, 0, 0),
F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(300000000, P_GPLL0_OUT_EVEN, 1, 0, 0),
F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ F(400000000, P_GPLL0_OUT_MAIN, 1.5, 0, 0),
Please remove this, the Max supported frequency is 300MHz.
+ { }
+};
+
+static struct clk_rcg2 gcc_qspi_core_clk_src = {
+ .cmd_rcgr = 0x4b008,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_9,
+ .freq_tbl = ftbl_gcc_qspi_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk_src",
+ .parent_names = gcc_parent_names_9,
+ .num_parents = 4,
+ .ops = &clk_rcg2_floor_ops,
Could we use the rcg2_ops instead?
+ },
+};
+
static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
F(9600000, P_BI_TCXO, 2, 0, 0),
F(19200000, P_BI_TCXO, 1, 0, 0),
@@ -1935,6 +1974,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
},
};
+static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
+ .halt_reg = 0x4b000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_cnoc_periph_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qspi_core_clk = {
+ .halt_reg = 0x4b004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk",
+ .parent_names = (const char *[]){
+ "gcc_qspi_core_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
.halt_reg = 0x17030,
.halt_check = BRANCH_HALT_VOTED,
@@ -3383,6 +3453,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
[GPLL4] = &gpll4.clkr,
[GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
[GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
+ [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
+ [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
+ [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
};
static const struct qcom_reset_map gcc_sdm845_resets[] = {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
