Linux Serial

• Thread Index

• Re: [PATCH v4 12/39] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
  • From: Conor Dooley
• Re: [PATCH v4 12/39] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
  • From: Varshini.Rajendran
• [PATCH] kdb: Fix the deadlock issue in KDB debugging.
  • From: LiuYe
• [tty:tty-testing] BUILD SUCCESS 13a44ba0dca8c133a4368323683a270a3874d88c
  • From: kernel test robot
• Re: [DO NOT MERGE v6 34/37] sh: Add dtbs target support.
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v6 13/37] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v6 15/37] clk: renesas: Add SH7750/7751 CPG Driver
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v6 33/37] sh: j2_mimas_v2.dts update
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v6 28/37] dt-bindings: soc: renesas: sh: Add SH7751 based target
  • From: Geert Uytterhoeven
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Federico Vaga
• Re: [DO NOT MERGE v6 14/37] clk: Compatible with narrow registers
  • From: Geert Uytterhoeven
• Re: [PATCH v2 14/14] serial: 8250_uniphier: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v2 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v2 14/14] serial: 8250_uniphier: Switch to use uart_read_port_properties()
  • From: Kunihiko Hayashi
• Re: [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: patchwork-bot+netdevbpf
• Re: (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Andi Shyti
• [PATCH v2] serial: Lock console when calling into driver before registration
  • From: Peter Collingbourne
• Re: [PATCH v2 05/14] serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  • From: Florian Fainelli
• Re: [PATCH v2 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Florian Fainelli
• Re: [PATCH v2 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  • From: Florian Fainelli
• Re: [PATCH v2] dt-bindings: serial: convert st,asc to DT schema
  • From: Krzysztof Kozlowski
• Re: [DO NOT MERGE v6 08/37] clocksource: sh_tmu: CLOCKSOURCE support.
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Andy Shevchenko
• Re: [DO NOT MERGE v6 02/37] sh: Kconfig unified OF supported targets.
  • From: Geert Uytterhoeven
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: VAMSHI GAJJELA
• [PATCH v2] dt-bindings: serial: convert st,asc to DT schema
  • From: Raphael Gallais-Pou
• [PATCH v5] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [PATCH v2 14/14] serial: 8250_uniphier: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 12/14] serial: 8250_pxa: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 13/14] serial: 8250_tegra: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 11/14] serial: 8250_omap: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 07/14] serial: 8250_dw: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 08/14] serial: 8250_ingenic: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 09/14] serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 05/14] serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v2 00/14] serial: Add a helper to parse device properties and more
  • From: Andy Shevchenko
• [PATCH v2 01/14] serial: core: Move struct uart_port::quirks closer to possible values
  • From: Andy Shevchenko
• [PATCH v2 02/14] serial: core: Add UPIO_UNKNOWN constant for unknown port type
  • From: Andy Shevchenko
• [PATCH v2 03/14] serial: port: Introduce a common helper to read properties
  • From: Andy Shevchenko
• [PATCH v2 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Andy Shevchenko
• Re: [PATCH] serial: Lock console when calling into driver before registration
  • From: John Ogness
• Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
  • From: Raphaël Gallais-Pou
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: John Ogness
• Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
  • From: Raphaël Gallais-Pou
• Re: [PATCH] tty: serial: manage irq with spin_lock_irqsave in SiFive console
  • From: Andy Chiu
• Re: [PATCH v1 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  • From: Andrew Jeffery
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andrew Jeffery
• Re: [GIT PULL] TTY/Serial driver fixes for 6.8-rc6
  • From: pr-tracker-bot
• Re: [PATCH 2/2] serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
  • From: Greg Kroah-Hartman
• Re: [PATCH] dt-bindings: serial: convert st,asc to DT schema
  • From: Krzysztof Kozlowski
• [PATCH 2/2] serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
  • From: Jonas Gorski
• [PATCH 1/2] serial: core: introduce uart_port_tx_limited_flags()
  • From: Jonas Gorski
• [GIT PULL] TTY/Serial driver fixes for 6.8-rc6
  • From: Greg KH
• [PATCH] dt-bindings: serial: convert st,asc to DT schema
  • From: Raphael Gallais-Pou
• Re: [PATCH v4 12/39] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
  • From: Conor Dooley
• Re: (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Mark Brown
• Re: [PATCH v1 19/19] hid-ft260: uart: improve write performance
  • From: Michael Zaidman
• [PATCH v4 12/39] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
  • From: Varshini Rajendran
• [PATCH v4 00/39] Add support for sam9x7 SoC family
  • From: Varshini Rajendran
• Re: [PATCH v4] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_dw: Do not reclock if already at correct rate
  • From: Andy Shevchenko
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Andy Shevchenko
• Re: [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
  • From: Christina Quast
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Petr Mladek
• Re: [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Serge Semin
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Crescent CY Hsieh
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Jiri Slaby
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Rengarajan.S
• Re: [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Thomas Bogendoerfer
• Re: [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Thomas Bogendoerfer
• Re: [PATCH 3/4] mips: zboot: Fix "no previous prototype" build warning
  • From: Thomas Bogendoerfer
• [PATCH v4] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Federico Vaga
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Jiri Slaby
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Jiri Slaby
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Jiri Slaby
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Leonardo Bras
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Leonardo Bras
• Re: [PATCH v1 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  • From: kernel test robot
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: andy . shevchenko
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: andy . shevchenko
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Florian Fainelli
• [PATCH] serial: Lock console when calling into driver before registration
  • From: Peter Collingbourne
• [PATCH] serial: 8250_dw: Do not reclock if already at correct rate
  • From: Peter Collingbourne
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Uwe Kleine-König
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Florian Fainelli
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: Use serial8250_do_set_termios for uartclk updating
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• [PATCH] serial: 8250: Use serial8250_do_set_termios for uartclk updating
  • From: Serge Semin
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Uwe Kleine-König
• [PATCH v1 tty] 8250: microchip: pci1xxxx: Refactor TX Burst code to use pre-existing APIs
  • From: Rengarajan S
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Uwe Kleine-König
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Ilpo Järvinen
• [PATCH] serial: 8250_dw: Emit an error message if getting the baudclk failed
  • From: Uwe Kleine-König
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Federico Vaga
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Jiri Slaby
• Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andrew Jeffery
• Re: [PATCH V2] serial: exar: Preserve FCTR[5] bit in pci_xr17v35x_setup()
  • From: andy . shevchenko
• [PATCH V2] serial: exar: Preserve FCTR[5] bit in pci_xr17v35x_setup()
  • From: Matthew Howell
• [PATCH V1] serial: exar: Preserve FCTR[5] bit in pci_xr17v35x_setup()
  • From: Matthew Howell
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: patchwork-bot+linux-riscv
• Re: [PATCH v1 01/14] serial: core: Move struct uart_port::quirks closer to possible values
  • From: Andy Shevchenko
• Re: [PATCH v1 01/14] serial: core: Move struct uart_port::quirks closer to possible values
  • From: Hugo Villeneuve
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Andy Shevchenko
• Re: [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Florian Fainelli
• Re: [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Serge Semin
• [PATCH v1 14/14] serial: 8250_uniphier: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 09/14] serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 13/14] serial: 8250_tegra: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 11/14] serial: 8250_omap: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 12/14] serial: 8250_pxa: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 05/14] serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 08/14] serial: 8250_ingenic: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 07/14] serial: 8250_dw: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 06/14] serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type
  • From: Andy Shevchenko
• [PATCH v1 03/14] serial: port: Introduce a common helper to read properties
  • From: Andy Shevchenko
• [PATCH v1 01/14] serial: core: Move struct uart_port::quirks closer to possible values
  • From: Andy Shevchenko
• [PATCH v1 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  • From: Andy Shevchenko
• [rft, PATCH v1 00/14] serial: Add a helper to parse device properties and more
  • From: Andy Shevchenko
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• RE: [PATCH v3] tty: serial: imx: Fix broken RS485
  • From: Christoph Niedermaier
• [PATCH v3] tty: serial: imx: Fix broken RS485
  • From: Rickard Andersson
• Re: [PATCH v3] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Patrice CHOTARD
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Leonardo Bras
• Re: [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Thomas Bogendoerfer
• Re: [PATCH v3] powerpc: macio: Make remove callback of macio driver void returned
  • From: Christophe Leroy
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH] drivers/tty/serial: Remove unused function early_mcf_setup
  • From: Greg Ungerer
• [PATCH v3] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Bartosz Golaszewski
• [PATCH v3] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• RE: [RFC][PATCH] serial: imx: Fix RS485 behaviour on disabled RX_DURING_TX
  • From: Christoph Niedermaier
• Re: [PATCH] drivers/tty/serial: Remove unused function early_mcf_setup
  • From: Geert Uytterhoeven
• [RFC][PATCH] serial: imx: Fix RS485 behaviour on disabled RX_DURING_TX
  • From: Christoph Niedermaier
• [tty:tty-testing] BUILD SUCCESS 1643281347f80116a500e6a17726351a7265a55c
  • From: kernel test robot
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Marek Vasut
• [tty:tty-linus] BUILD SUCCESS 3b69e32e151bc4a4e3c785cbdb1f918d5ee337ed
  • From: kernel test robot
• [tty:tty-next] BUILD SUCCESS 36d97cdaf46593330067c34ed3639d0556d4fd6d
  • From: kernel test robot
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Rickard X Andersson
• Re: [PATCH v2] tty: serial: imx: Fix broken RS485
  • From: Marek Vasut
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Marek Vasut
• Re: [PATCH v2] tty: serial: imx: Fix broken RS485
  • From: Greg KH
• Re: [PATCH v2] tty: serial: imx: Fix broken RS485
  • From: Greg KH
• [PATCH v2] tty: serial: imx: Fix broken RS485
  • From: Rickard Andersson
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Rickard X Andersson
• Re: [PATCH] drivers/tty/serial: Remove unused function early_mcf_setup
  • From: Jiri Slaby
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Rengarajan.S
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• [PATCH] drivers/tty/serial: Remove unused function early_mcf_setup
  • From: Thomas Huth
• [PATCH v2 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: max14830 nobody cared Disbling IRQ issue
  • From: Hugo Villeneuve
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• [PATCH v2 7/7] serial: 8250_exar: Don't use "proxy" headers
  • From: Andy Shevchenko
• [PATCH v2 5/7] serial: 8250_exar: switch to DEFINE_SIMPLE_DEV_PM_OPS()
  • From: Andy Shevchenko
• [PATCH v2 3/7] serial: 8250_exar: Clear interrupts before registering handler
  • From: Andy Shevchenko
• [PATCH v2 6/7] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• [PATCH v2 1/7] serial: 8250_exar: Don't remove GPIO device on suspend
  • From: Andy Shevchenko
• [PATCH v2 2/7] serial: 8250_exar: Use dev_get_drvdata() directly in PM callbacks
  • From: Andy Shevchenko
• [PATCH v2 4/7] serial: 8250_exar: Use generic function to set firmware node
  • From: Andy Shevchenko
• [PATCH v2 0/7] serial: 8250_exar: A few updates to the driver
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Andy Shevchenko
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• [PATCH v2] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Bartosz Golaszewski
• [PATCH printk v2 03/26] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: John Ogness
• [PATCH printk v2 00/26] wire up write_atomic() printing
  • From: John Ogness
• [PATCH printk v2 02/26] serial: core: Use lock wrappers
  • From: John Ogness
• [PATCH printk v2 01/26] serial: core: Provide port lock wrappers
  • From: John Ogness
• [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• Re: [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS WITH WARNING b8badbf3b592d3f8b70efc66be2c2c4d9698de51
  • From: kernel test robot
• [PATCH 3/3] serial: pmac_zilog: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 1/3] tty: amiserial: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 0/3] tty: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 2/3] tty: goldfish: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [tty:tty-testing 31/36] drivers/tty/serial/st-asc.c:525:7: warning: variable 'manual_rts' is used uninitialized whenever 'if' condition is false
  • From: kernel test robot
• Re: [GIT PULL] TTY/Serial driver fixes for 6.8-rc5
  • From: pr-tracker-bot
• Re: [PATCH v2 1/1] tty: Don't include tty_buffer.h in tty.h
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Greg Kroah-Hartman
• [GIT PULL] TTY/Serial driver fixes for 6.8-rc5
  • From: Greg KH
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: kernel test robot
• [PATCH 1/2] serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
  • From: Lino Sanfilippo
• [PATCH 2/2] serial: amba-pl011: Fix DMA transmission in RS485 mode
  • From: Lino Sanfilippo
• Re: [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Leonardo Bras
• Re: [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Leonardo Bras
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• Re: [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Marek Vasut
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Serge Semin
• [PATCH] tty: serial: imx: Fix broken RS485
  • From: Rickard Andersson
• [PATCH][next] tty: jsm: Remove redundant assignment to variable linestatus
  • From: Colin Ian King
• Re: [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Leonardo Bras
• [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Leonardo Bras
• [RFC PATCH v2 1/4] irq: Move spurious_deferred bit from BIT(31) to BIT(0)
  • From: Leonardo Bras
• [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Leonardo Bras
• [RFC PATCH v2 0/4] Fix force_irqthread + fast triggered edge-type IRQs
  • From: Leonardo Bras
• Re: [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Jiri Slaby
• [PATCH][next] serial: lpc32xx_hs: remove redundant check and assignment of hsu_rate
  • From: Colin Ian King
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Florian Fainelli
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Florian Fainelli
• [PATCH 0/4] MIPS: Fix missing proto and passing arg warnings
  • From: Serge Semin
• [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Serge Semin
• [PATCH 3/4] mips: zboot: Fix "no previous prototype" build warning
  • From: Serge Semin
• [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Serge Semin
• [PATCH 1/4] mips: cm: Add __mips_cm_l2sync_phys_base prototype declaration
  • From: Serge Semin
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Ilpo Järvinen
• [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• [PATCH v2 1/1] tty: Don't include tty_buffer.h in tty.h
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• [PATCH v1 5/5] serial: 8250_exar: Don't use "proxy" headers
  • From: Andy Shevchenko
• [PATCH v1 2/5] serial: 8250_exar: Use generic function to set firmware node
  • From: Andy Shevchenko
• [PATCH v1 1/5] serial: 8250_exar: Clear interrupts before registering handler
  • From: Andy Shevchenko
• [PATCH v1 3/5] serial: 8250_exar: switch to DEFINE_SIMPLE_DEV_PM_OPS()
  • From: Andy Shevchenko
• [PATCH v1 0/5] serial: 8250_exar: A few updates to the driver
  • From: Andy Shevchenko
• Re: [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Linus Walleij
• [PATCH v1 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Conor Dooley
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Anup Patel
• Re: [PATCH v7 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Krzysztof Kozlowski
• Re: (subset) [PATCH v7 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Paul Walmsley
• [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Palmer Dabbelt
• Re: [PATCH 1/1] tty: Don't include tty_buffer.h tty.h
  • From: Ilpo Järvinen
• [PATCH 1/1] tty: Don't include tty_buffer.h tty.h
  • From: Ilpo Järvinen
• Re: [rt-devel:linux-6.8.y-rt] [serial] 0a81ac5ba5: Kernel_panic-not_syncing:No_working_init_found
  • From: Sebastian Andrzej Siewior
• [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Andy Shevchenko
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Segher Boessenkool
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Sreenath Vijayan
• Re: [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Sreenath Vijayan
• RE: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: David Laight
• [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Bartosz Golaszewski
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Jiri Slaby
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Dan Carpenter
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• [PATCH v7 0/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 1/3] dt-bindings: serial: allow onewire as child node
  • From: Christoph Winklhofer via B4 Relay
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Jiri Slaby
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Sebastian Reichel
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Segher Boessenkool
• [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Andy Shevchenko
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Andy Shevchenko
• Re: [PATCH v6 5/6] serial: core: Handle serial console options
  • From: Andy Shevchenko
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Andy Shevchenko
• Re: [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
  • From: Jiri Kosina
• [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Arnd Bergmann
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• [PATCH v6 6/6] serial: 8250: Add preferred console in serial8250_isa_init_ports()
  • From: Tony Lindgren
• [PATCH v6 5/6] serial: core: Handle serial console options
  • From: Tony Lindgren
• [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• [PATCH v6 3/6] printk: Flag register_console() if console is set on command line
  • From: Tony Lindgren
• [PATCH v6 2/6] printk: Don't try to parse DEVNAME:0.0 console options
  • From: Tony Lindgren
• [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• [PATCH v6 0/6] Add support for DEVNAME:0.0 style hardware based addressing
  • From: Tony Lindgren
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• Re: (subset) [PATCH v6 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Krzysztof Kozlowski
• Re: (subset) [PATCH v6 1/3] dt-bindings: serial: allow onewire as child node
  • From: Krzysztof Kozlowski
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• [PATCH] tty/vt: Corrected doc of vc_sanitize_unicode(), vc_translate_unicode()
  • From: Roman Žilka
• Re: [PATCH v5 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Masahiro Yamada
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• [PATCH v1 19/19] hid-ft260: uart: improve write performance
  • From: Michael Zaidman
• [PATCH v1 18/19] hid-ft260: uart: fix rx data loss after device reopening
  • From: Michael Zaidman
• [PATCH v1 17/19] hid-ft260: uart: arm wake-up timer unconditionally on tty session start
  • From: Michael Zaidman
• [PATCH v1 16/19] hid-ft260: uart: suppress unhandled report 0xb1 dmesg
  • From: Michael Zaidman
• [PATCH v1 15/19] hid-ft260: uart: remove FIXME for wake-up workaround
  • From: Michael Zaidman
• [PATCH v1 14/19] hid-ft260: uart: cleanup and refactoring
  • From: Michael Zaidman
• [PATCH v1 13/19] hid-ft260: improve usb interface type detection logic
  • From: Michael Zaidman
• [PATCH v1 12/19] hid-ft260: uart: use kfifo_avail for fifo write room check
  • From: Michael Zaidman
• [PATCH v1 11/19] hid-ft260: uart: do not disable wakeup workaround twice
  • From: Michael Zaidman
• [PATCH v1 10/19] hid-ft260: uart: do not configure baud rate twice
  • From: Michael Zaidman
• [PATCH v1 09/19] hid-ft260: uart: wakeup device early to not lose rx data
  • From: Michael Zaidman
• [PATCH v1 08/19] hid-ft260: depend wakeup workaround activation on eeprom config
  • From: Michael Zaidman
• [PATCH v1 07/19] hid-ft260: depend wakeup workaround activation on uart baud rate
  • From: Michael Zaidman
• [PATCH v1 06/19] hid-ft260: uart: enable wakeup workaround
  • From: Michael Zaidman
• [PATCH v1 05/19] hid-ft260: fix unprotected write_buf concurrent access
  • From: Michael Zaidman
• [PATCH v1 04/19] hid-ft260: remove dead code in ft260_uart_receive_chars
  • From: Michael Zaidman
• [PATCH v1 03/19] hid-ft260: fix i2c driver regression in ft260_raw_event
  • From: Michael Zaidman
• [PATCH v1 02/19] hid-ft260: fix Wformat warning
  • From: Michael Zaidman
• [PATCH v1 01/19] hid-ft260: fix incompatible-pointer-types error
  • From: Michael Zaidman
• [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
  • From: Michael Zaidman
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Greg KH
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Jiri Slaby
• [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 0/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 1/3] dt-bindings: serial: allow onewire as child node
  • From: Christoph Winklhofer via B4 Relay
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• [PATCH v8 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v8 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v8 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v8 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v8 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v8 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v8 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v8 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v8 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: Hugo Villeneuve
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: John Ogness
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Greg KH
• [tty:tty-testing] BUILD SUCCESS 6cc3028f797a549f256d593867a769ab6a8265f2
  • From: kernel test robot
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Jiri Slaby
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: kernel test robot
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: kernel test robot
• [PATCH v5 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v5 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Yoann Congal
• [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v5 0/3] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal of CONFIG_BASE_FULL
  • From: Yoann Congal
• [tty:tty-linus] BUILD SUCCESS 7be50f2e8f20fc2299069b28dea59a28e3abe20a
  • From: kernel test robot
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Petr Mladek
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Petr Mladek
• Re: [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Petr Mladek
• Re: [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: Sreenath Vijayan
• Re: [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: Greg Kroah-Hartman
• [tty:tty-testing 28/29] include/linux/printk.h:275:13: warning: 'dump_printk_buffer' defined but not used
  • From: kernel test robot
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: kernel test robot
• RE: [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• [tty:tty-testing 28/29] kernel/printk/printk.c:4267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
  • From: kernel test robot
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Masahiro Yamada
• Re: [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• [PATCH 2/4] serial: sc16is7xx: split into core and I2C/SPI parts (core)
  • From: Hugo Villeneuve
• [PATCH 0/4] serial: sc16is7xx: split into core and I2C/SPI parts
  • From: Hugo Villeneuve
• [PATCH 1/4] serial: sc16is7xx: simplify and improve Kconfig help text
  • From: Hugo Villeneuve
• [PATCH 4/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg)
  • From: Hugo Villeneuve
• [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: Hugo Villeneuve
• Re: [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Masahiro Yamada
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Ilpo Järvinen
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Greg KH
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Petr Mladek
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Petr Mladek
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Petr Mladek
• Re: [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Petr Mladek
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Yoann Congal
• [PATCH v4 0/3] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal of CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v7 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v7 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v7 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v7 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v7 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v7 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v7 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v7 0/8] I3C target mode support
  • From: Frank Li
• [tty:tty-testing] BUILD SUCCESS a802f50d6e92298d44a806d326a2ba3eefa6db72
  • From: kernel test robot
• [rt-devel:linux-6.8.y-rt] [serial] 0a81ac5ba5: Kernel_panic-not_syncing:No_working_init_found
  • From: kernel test robot
• Re: [PATCH v3 0/2] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal
  • From: Petr Mladek
• Re: [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Petr Mladek
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Petr Mladek
• Re: [PATCH v6 8/8] tty: i3c: add TTY over I3C master support
  • From: kernel test robot
• [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• RE: [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• RE: [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Tamseel Shams
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: John Ogness
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: John Ogness
• Re: [syzbot] Monthly serial report (Feb 2024)
  • From: Tony Lindgren
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Jiri Slaby
• Re: [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• Re: [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Masahiro Yamada
• [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Yoann Congal
• [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v3 0/2] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal
  • From: Yoann Congal
• Re: [GIT PULL] TTY/Serial driver fixes for 6.8-rc3
  • From: pr-tracker-bot
• [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [GIT PULL] TTY/Serial driver fixes for 6.8-rc3
  • From: Greg KH
• Re: [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
  • From: Wolfram Sang
• [PATCH 2/2] serial: core: make serial_base_bus_type const
  • From: Ricardo B. Marliere
• [PATCH 1/2] serdev: make serdev_bus_type const
  • From: Ricardo B. Marliere
• [PATCH 0/2] drivers: tty: struct bus_type cleanup
  • From: Ricardo B. Marliere
• Re: [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Tetsuo Handa
• [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Tamseel Shams
• [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• [PATCH v6 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v6 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v6 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v6 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v6 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v6 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v6 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v6 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v6 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v5 1/8] i3c: add target mode support
  • From: kernel test robot
• [syzbot] Monthly serial report (Feb 2024)
  • From: syzbot
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH v5 1/8] i3c: add target mode support
  • From: kernel test robot
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Sam Protsenko
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [RFC PATCH v2 05/21] pnp.h: Return -EPROBE_DEFER for disabled IRQ resource in pnp_irq()
  • From: Sunil V L
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• [PATCH 22/22] tty: vt: decrypt magic constants in vc_is_control()
  • From: Jiri Slaby (SUSE)
• [PATCH 21/22] tty: vt: use ASCII enum constants in vt_console_print()
  • From: Jiri Slaby (SUSE)
• [PATCH 20/22] tty: vt: use switch+case in the ESgetpars case
  • From: Jiri Slaby (SUSE)
• [PATCH 19/22] tty: vt: use switch+case in the ESnonstd case
  • From: Jiri Slaby (SUSE)
• [PATCH 18/22] tty: vt: add new helper for reseting vc parameters
  • From: Jiri Slaby (SUSE)
• [PATCH 17/22] tty: vt: handle CSI+[ inside preexisting switch-case
  • From: Jiri Slaby (SUSE)
• [PATCH 16/22] tty: vt: simplify ansi_control_string()
  • From: Jiri Slaby (SUSE)
• [PATCH 15/22] tty: vt: name, reflow and document enum vc_ctl_state
  • From: Jiri Slaby (SUSE)
• [PATCH 14/22] tty: vt: move CSI ECMA handling to a separate function
  • From: Jiri Slaby (SUSE)
• [PATCH 13/22] tty: vt: move CSI DEC handling to a separate function
  • From: Jiri Slaby (SUSE)
• [PATCH 12/22] tty: vt: separate ESesc state handling into handle_esc()
  • From: Jiri Slaby (SUSE)
• [PATCH 11/22] tty: vt: extract ascii handling to handle_ascii()
  • From: Jiri Slaby (SUSE)
• [PATCH 10/22] tty: vt: accept u8 in do_con_trol() and vc_setGx()
  • From: Jiri Slaby (SUSE)
• [PATCH 09/22] tty: vt: put cases on separate lines
  • From: Jiri Slaby (SUSE)
• [PATCH 08/22] tty: vt: rename setterm_command() to csi_RSB()
  • From: Jiri Slaby (SUSE)
• [PATCH 07/22] tty: vt: define an enum for CSI+] codes
  • From: Jiri Slaby (SUSE)
• [PATCH 06/22] tty: vt: move CSI+n handling along to other ECMA CSIs
  • From: Jiri Slaby (SUSE)
• [PATCH 05/22] tty: vt: remove unneeded assignment of EPecma to vc_priv
  • From: Jiri Slaby (SUSE)
• [PATCH 04/22] tty: vt: split DEC CSI+h/l handling into csi_DEC_hl()
  • From: Jiri Slaby (SUSE)
• [PATCH 03/22] tty: vt: rename set_mode() to csi_hl()
  • From: Jiri Slaby (SUSE)
• [PATCH 02/22] tty: vt: define enums for CSI+h/l codes
  • From: Jiri Slaby (SUSE)
• [PATCH 01/22] tty: vt: make rgb_from_256() slighly more comprehensible
  • From: Jiri Slaby (SUSE)
• [PATCH 00/22] tty: vt: cleanup ESC sequences handling
  • From: Jiri Slaby (SUSE)
• [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Sam Protsenko
• Re: [RFC PATCH v2 05/21] pnp.h: Return -EPROBE_DEFER for disabled IRQ resource in pnp_irq()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Stefan Wahren
• Re: [PATCH] Revert "tty: serial: amba-pl011: Remove QDF2xxx workarounds"
  • From: Mark Brown
• [PATCH] Revert "tty: serial: amba-pl011: Remove QDF2xxx workarounds"
  • From: Konrad Dybcio
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Mark Brown
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Emil Kronborg
• Re: [PATCH v2 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Emil Kronborg
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Greg KH
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Konrad Dybcio
• Re: This is classified as spam [was: [PATCH] tty: fix atomicity violation in n_tty_read]
  • From: Greg KH
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Andy Shevchenko
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: John Ogness
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: John Ogness
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Christina Quast
• [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby (SUSE)
• [PATCH v2 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby (SUSE)
• [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Sreenath Vijayan
• [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• This is classified as spam [was: [PATCH] tty: fix atomicity violation in n_tty_read]
  • From: Jiri Slaby
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH] tty: serial: manage irq with spin_lock_irqsave in SiFive console
  • From: Jiri Slaby
• [PATCH] tty: serial: manage irq with spin_lock_irqsave in SiFive console
  • From: Andy Chiu
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Peter Hilber
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: John Ogness
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Masahiro Yamada
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Mark Brown
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH v5 2/3] dt-bindings: serial: allow onewire as child node
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby
• Re: mxs-auart broken in v6.2 and onwards
  • From: Jiri Slaby
• [PATCH 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby (SUSE)
• [PATCH 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby (SUSE)
• [PATCH] serial: 8250_pci1xxxx: partially revert off by one patch
  • From: Dan Carpenter
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Daniel Beer
• Re: [PATCH v5 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Rob Herring
• Re: [PATCH v5 1/6] dt-bindings: serial: Add binding for rs485 receiver enable GPIO
  • From: Rob Herring
• Re: [PATCH v5 1/3] dt-bindings: w1: UART 1-Wire bus
  • From: Rob Herring
• Re: Re: mxs-auart broken in v6.2 and onwards
  • From: Emil Kronborg
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Nathan Chancellor
• RE: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Christoph Niedermaier
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Rengarajan.S
• Re: mxs-auart broken in v6.2 and onwards
  • From: Jiri Slaby
• Re: [PATCH v5 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Krzysztof Kozlowski
• [PATCH v5 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v5 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v5 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v5 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v5 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v5 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v5 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v5 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v5 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Conor Dooley
• [PATCH 6.6 330/331] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: Greg Kroah-Hartman
• [PATCH 6.1 185/185] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Luis Chamberlain
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Yoann Congal
• Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Quentin Schulz
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Jiri Slaby