From: Parker Newman <pnewman@xxxxxxxxxxxxxxx> Change line wrapping of ternary operators in cti_get_port_type_xr17c15x_xr17v25x() for better readability. Old example: port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; New: port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; Based on feedback from: Link: https://lore.kernel.org/linux-serial/f2353b8c-2079-b895-2707-f6be83161288@xxxxxxxxxxxxxxx Signed-off-by: Parker Newman <pnewman@xxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_exar.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 10725ad0f3ef..a76b4e5bab4e 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -741,19 +741,19 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p break; // 1x RS232, 1x RS422/RS485 case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1: - port_type = port_num == 0 ? - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; + port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 : + CTI_PORT_TYPE_RS422_485; break; // 2x RS232, 2x RS422/RS485 case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2: - port_type = port_num < 2 ? - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 : + CTI_PORT_TYPE_RS422_485; break; // 4x RS232, 4x RS422/RS485 case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4: case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP: - port_type = port_num < 4 ? - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; + port_type = port_num < 4 ? CTI_PORT_TYPE_RS232 : + CTI_PORT_TYPE_RS422_485; break; // RS232/RS422/RS485 HW (jumper) selectable case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2: @@ -789,13 +789,13 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p break; // 6x RS232, 2x RS422/RS485 case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP: - port_type = port_num < 6 ? - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; + port_type = port_num < 6 ? CTI_PORT_TYPE_RS232 : + CTI_PORT_TYPE_RS422_485; break; // 2x RS232, 6x RS422/RS485 case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP: - port_type = port_num < 2 ? - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485; + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 : + CTI_PORT_TYPE_RS422_485; break; default: dev_err(&pcidev->dev, "unknown/unsupported device\n"); -- 2.43.2
