From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
Moved code for getting number of ports from exar_pci_probe() to a
separate exar_get_nr_ports() function.
Chnages in v3:
- Only moved existing code in this patch, will add CTI code in subsequent
patch
Signed-off-by: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_exar.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 3565b880f512..388dd60ad23a 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -703,6 +703,21 @@ static irqreturn_t exar_misc_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static unsigned int exar_get_nr_ports(struct exar8250_board *board,
+ struct pci_dev *pcidev)
+{
+ unsigned int nr_ports = 0;
+
+ if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+ nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
+ else if (board->num_ports)
+ nr_ports = board->num_ports;
+ else
+ nr_ports = pcidev->device & 0x0f;
+
+ return nr_ports;
+}
+
static int
exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
{
@@ -722,12 +737,12 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3);
- if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
- nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
- else if (board->num_ports)
- nr_ports = board->num_ports;
- else
- nr_ports = pcidev->device & 0x0f;
+ nr_ports = exar_get_nr_ports(board, pcidev);
+ if (nr_ports == 0) {
+ dev_err_probe(&pcidev->dev, -ENODEV,
+ "failed to get number of ports\n");
+ return -ENODEV;
+ }
priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
if (!priv)
--
2.43.2
