Linux Serial

• Thread Index

• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• [PATCH] drivers/tty/serial: Remove unused function early_mcf_setup
  • From: Thomas Huth
• [PATCH v2 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: max14830 nobody cared Disbling IRQ issue
  • From: Hugo Villeneuve
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• [PATCH v2 7/7] serial: 8250_exar: Don't use "proxy" headers
  • From: Andy Shevchenko
• [PATCH v2 5/7] serial: 8250_exar: switch to DEFINE_SIMPLE_DEV_PM_OPS()
  • From: Andy Shevchenko
• [PATCH v2 3/7] serial: 8250_exar: Clear interrupts before registering handler
  • From: Andy Shevchenko
• [PATCH v2 6/7] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• [PATCH v2 1/7] serial: 8250_exar: Don't remove GPIO device on suspend
  • From: Andy Shevchenko
• [PATCH v2 2/7] serial: 8250_exar: Use dev_get_drvdata() directly in PM callbacks
  • From: Andy Shevchenko
• [PATCH v2 4/7] serial: 8250_exar: Use generic function to set firmware node
  • From: Andy Shevchenko
• [PATCH v2 0/7] serial: 8250_exar: A few updates to the driver
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• Re: [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: Andy Shevchenko
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• Re: [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Thomas Gleixner
• [PATCH v2] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Bartosz Golaszewski
• [PATCH printk v2 03/26] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: John Ogness
• [PATCH printk v2 00/26] wire up write_atomic() printing
  • From: John Ogness
• [PATCH printk v2 02/26] serial: core: Use lock wrappers
  • From: John Ogness
• [PATCH printk v2 01/26] serial: core: Provide port lock wrappers
  • From: John Ogness
• [PATCH printk v2 08/26] printk: nbcon: Implement processing in port->lock wrapper
  • From: John Ogness
• Re: [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Greg Kroah-Hartman
• [tty:tty-testing] BUILD SUCCESS WITH WARNING b8badbf3b592d3f8b70efc66be2c2c4d9698de51
  • From: kernel test robot
• [PATCH 3/3] serial: pmac_zilog: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 1/3] tty: amiserial: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 0/3] tty: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 2/3] tty: goldfish: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [tty:tty-testing 31/36] drivers/tty/serial/st-asc.c:525:7: warning: variable 'manual_rts' is used uninitialized whenever 'if' condition is false
  • From: kernel test robot
• Re: [GIT PULL] TTY/Serial driver fixes for 6.8-rc5
  • From: pr-tracker-bot
• Re: [PATCH v2 1/1] tty: Don't include tty_buffer.h in tty.h
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Greg Kroah-Hartman
• [GIT PULL] TTY/Serial driver fixes for 6.8-rc5
  • From: Greg KH
• Re: [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: kernel test robot
• [PATCH 1/2] serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
  • From: Lino Sanfilippo
• [PATCH 2/2] serial: amba-pl011: Fix DMA transmission in RS485 mode
  • From: Lino Sanfilippo
• Re: [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Leonardo Bras
• Re: [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Leonardo Bras
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• Re: [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: imx: Fix broken RS485
  • From: Marek Vasut
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Serge Semin
• [PATCH] tty: serial: imx: Fix broken RS485
  • From: Rickard Andersson
• [PATCH][next] tty: jsm: Remove redundant assignment to variable linestatus
  • From: Colin Ian King
• Re: [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• [RFC PATCH v2 3/4] irq: Introduce IRQ_HANDLED_MANY
  • From: Leonardo Bras
• [RFC PATCH v2 4/4] tty/serial8250: Make use of IRQ_HANDLED_MANY interface
  • From: Leonardo Bras
• [RFC PATCH v2 1/4] irq: Move spurious_deferred bit from BIT(31) to BIT(0)
  • From: Leonardo Bras
• [RFC PATCH v2 2/4] irq/spurious: Account for multiple handles in note_interrupt
  • From: Leonardo Bras
• [RFC PATCH v2 0/4] Fix force_irqthread + fast triggered edge-type IRQs
  • From: Leonardo Bras
• Re: [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Jiri Slaby
• [PATCH][next] serial: lpc32xx_hs: remove redundant check and assignment of hsu_rate
  • From: Colin Ian King
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Serge Semin
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Florian Fainelli
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Florian Fainelli
• [PATCH 0/4] MIPS: Fix missing proto and passing arg warnings
  • From: Serge Semin
• [PATCH 4/4] tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  • From: Serge Semin
• [PATCH 3/4] mips: zboot: Fix "no previous prototype" build warning
  • From: Serge Semin
• [PATCH 2/4] mips: cm: Add CM GCR and L2-sync base address getters declarations
  • From: Serge Semin
• [PATCH 1/4] mips: cm: Add __mips_cm_l2sync_phys_base prototype declaration
  • From: Serge Semin
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Ilpo Järvinen
• [PATCH v1 1/1] serial: 8250_bcm7271: Replace custom unit definitions
  • From: Andy Shevchenko
• [PATCH v2 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• [PATCH v2 1/1] tty: Don't include tty_buffer.h in tty.h
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• [PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources
  • From: Andy Shevchenko
• [PATCH v1 5/5] serial: 8250_exar: Don't use "proxy" headers
  • From: Andy Shevchenko
• [PATCH v1 2/5] serial: 8250_exar: Use generic function to set firmware node
  • From: Andy Shevchenko
• [PATCH v1 1/5] serial: 8250_exar: Clear interrupts before registering handler
  • From: Andy Shevchenko
• [PATCH v1 3/5] serial: 8250_exar: switch to DEFINE_SIMPLE_DEV_PM_OPS()
  • From: Andy Shevchenko
• [PATCH v1 0/5] serial: 8250_exar: A few updates to the driver
  • From: Andy Shevchenko
• Re: [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Linus Walleij
• [PATCH v1 1/1] serial: 8250_of: Drop quirk fot NPCM from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Conor Dooley
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Anup Patel
• Re: [PATCH v7 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Krzysztof Kozlowski
• Re: (subset) [PATCH v7 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Paul Walmsley
• [PATCH] tty: hvc: Don't enable the RISC-V SBI console by default
  • From: Palmer Dabbelt
• Re: [PATCH 1/1] tty: Don't include tty_buffer.h tty.h
  • From: Ilpo Järvinen
• [PATCH 1/1] tty: Don't include tty_buffer.h tty.h
  • From: Ilpo Järvinen
• Re: [rt-devel:linux-6.8.y-rt] [serial] 0a81ac5ba5: Kernel_panic-not_syncing:No_working_init_found
  • From: Sebastian Andrzej Siewior
• [PATCH v1 1/1] serial: 8250_pci1xxxx: Drop quirk from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v9 1/4] serial: 8250: Add 8250 port clock update method
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Andy Shevchenko
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Segher Boessenkool
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Sreenath Vijayan
• Re: [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Sreenath Vijayan
• RE: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: David Laight
• [PATCH] serial: st-asc: don't get/put GPIOs in atomic context
  • From: Bartosz Golaszewski
• Re: [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Jiri Slaby
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Dan Carpenter
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• [PATCH v7 0/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v7 1/3] dt-bindings: serial: allow onewire as child node
  • From: Christoph Winklhofer via B4 Relay
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Jiri Slaby
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Sebastian Reichel
• Re: [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Segher Boessenkool
• [PATCH v1 1/1] serial: 8250_pci1xxxx: Don't use "proxy" headers
  • From: Andy Shevchenko
• Re: [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Andy Shevchenko
• Re: [PATCH v6 5/6] serial: core: Handle serial console options
  • From: Andy Shevchenko
• Re: [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Andy Shevchenko
• Re: [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
  • From: Jiri Kosina
• [PATCH] tty: hvc-iucv: fix function pointer casts
  • From: Arnd Bergmann
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• [PATCH v6 6/6] serial: 8250: Add preferred console in serial8250_isa_init_ports()
  • From: Tony Lindgren
• [PATCH v6 5/6] serial: core: Handle serial console options
  • From: Tony Lindgren
• [PATCH v6 4/6] serial: core: Add support for DEVNAME:0.0 style naming for kernel console
  • From: Tony Lindgren
• [PATCH v6 3/6] printk: Flag register_console() if console is set on command line
  • From: Tony Lindgren
• [PATCH v6 2/6] printk: Don't try to parse DEVNAME:0.0 console options
  • From: Tony Lindgren
• [PATCH v6 1/6] printk: Save console options for add_preferred_console_match()
  • From: Tony Lindgren
• [PATCH v6 0/6] Add support for DEVNAME:0.0 style hardware based addressing
  • From: Tony Lindgren
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• Re: (subset) [PATCH v6 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Krzysztof Kozlowski
• Re: (subset) [PATCH v6 1/3] dt-bindings: serial: allow onewire as child node
  • From: Krzysztof Kozlowski
• Re: [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• [PATCH] tty/vt: Corrected doc of vc_sanitize_unicode(), vc_translate_unicode()
  • From: Roman Žilka
• Re: [PATCH v5 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Masahiro Yamada
• Re: [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• [PATCH v1 19/19] hid-ft260: uart: improve write performance
  • From: Michael Zaidman
• [PATCH v1 18/19] hid-ft260: uart: fix rx data loss after device reopening
  • From: Michael Zaidman
• [PATCH v1 17/19] hid-ft260: uart: arm wake-up timer unconditionally on tty session start
  • From: Michael Zaidman
• [PATCH v1 16/19] hid-ft260: uart: suppress unhandled report 0xb1 dmesg
  • From: Michael Zaidman
• [PATCH v1 15/19] hid-ft260: uart: remove FIXME for wake-up workaround
  • From: Michael Zaidman
• [PATCH v1 14/19] hid-ft260: uart: cleanup and refactoring
  • From: Michael Zaidman
• [PATCH v1 13/19] hid-ft260: improve usb interface type detection logic
  • From: Michael Zaidman
• [PATCH v1 12/19] hid-ft260: uart: use kfifo_avail for fifo write room check
  • From: Michael Zaidman
• [PATCH v1 11/19] hid-ft260: uart: do not disable wakeup workaround twice
  • From: Michael Zaidman
• [PATCH v1 10/19] hid-ft260: uart: do not configure baud rate twice
  • From: Michael Zaidman
• [PATCH v1 09/19] hid-ft260: uart: wakeup device early to not lose rx data
  • From: Michael Zaidman
• [PATCH v1 08/19] hid-ft260: depend wakeup workaround activation on eeprom config
  • From: Michael Zaidman
• [PATCH v1 07/19] hid-ft260: depend wakeup workaround activation on uart baud rate
  • From: Michael Zaidman
• [PATCH v1 06/19] hid-ft260: uart: enable wakeup workaround
  • From: Michael Zaidman
• [PATCH v1 05/19] hid-ft260: fix unprotected write_buf concurrent access
  • From: Michael Zaidman
• [PATCH v1 04/19] hid-ft260: remove dead code in ft260_uart_receive_chars
  • From: Michael Zaidman
• [PATCH v1 03/19] hid-ft260: fix i2c driver regression in ft260_raw_event
  • From: Michael Zaidman
• [PATCH v1 02/19] hid-ft260: fix Wformat warning
  • From: Michael Zaidman
• [PATCH v1 01/19] hid-ft260: fix incompatible-pointer-types error
  • From: Michael Zaidman
• [PATCH v1 00/19] hid-ft260: Fixes for serial driver patch v4
  • From: Michael Zaidman
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Greg KH
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Jiri Slaby
• [PATCH v6 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 2/3] dt-bindings: w1: UART 1-Wire bus
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 0/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v6 1/3] dt-bindings: serial: allow onewire as child node
  • From: Christoph Winklhofer via B4 Relay
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• [PATCH v8 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v8 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v8 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v8 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v8 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v8 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v8 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v8 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v8 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: Hugo Villeneuve
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: John Ogness
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Greg KH
• [tty:tty-testing] BUILD SUCCESS 6cc3028f797a549f256d593867a769ab6a8265f2
  • From: kernel test robot
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Jiri Slaby
• Re: [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• [PATCH v3] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Rengarajan.S
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan.S
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: kernel test robot
• Re: [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: kernel test robot
• [PATCH v5 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v5 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Yoann Congal
• [PATCH v5 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v5 0/3] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal of CONFIG_BASE_FULL
  • From: Yoann Congal
• [tty:tty-linus] BUILD SUCCESS 7be50f2e8f20fc2299069b28dea59a28e3abe20a
  • From: kernel test robot
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Petr Mladek
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Petr Mladek
• Re: [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Petr Mladek
• Re: [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: Sreenath Vijayan
• Re: [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: Greg Kroah-Hartman
• [tty:tty-testing 28/29] include/linux/printk.h:275:13: warning: 'dump_printk_buffer' defined but not used
  • From: kernel test robot
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [tty:tty-testing 28/29] include/linux/printk.h:275:13: error: unused function 'dump_printk_buffer'
  • From: kernel test robot
• RE: [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• [tty:tty-testing 28/29] kernel/printk/printk.c:4267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
  • From: kernel test robot
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Masahiro Yamada
• Re: [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• [PATCH 2/4] serial: sc16is7xx: split into core and I2C/SPI parts (core)
  • From: Hugo Villeneuve
• [PATCH 0/4] serial: sc16is7xx: split into core and I2C/SPI parts
  • From: Hugo Villeneuve
• [PATCH 1/4] serial: sc16is7xx: simplify and improve Kconfig help text
  • From: Hugo Villeneuve
• [PATCH 4/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg)
  • From: Hugo Villeneuve
• [PATCH 3/4] serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  • From: Hugo Villeneuve
• Re: [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Masahiro Yamada
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Andy Shevchenko
• Re: [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Ilpo Järvinen
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Greg KH
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Petr Mladek
• Re: [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Petr Mladek
• Re: [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Petr Mladek
• Re: [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Petr Mladek
• Re: [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [PATCH v2] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [PATCH v4 3/3] printk: Remove redundant CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v4 2/3] printk: Change type of CONFIG_BASE_SMALL to bool
  • From: Yoann Congal
• [PATCH v4 0/3] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal of CONFIG_BASE_FULL
  • From: Yoann Congal
• [PATCH v4 1/3] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v7 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v7 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v7 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v7 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v7 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v7 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v7 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v7 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v7 0/8] I3C target mode support
  • From: Frank Li
• [tty:tty-testing] BUILD SUCCESS a802f50d6e92298d44a806d326a2ba3eefa6db72
  • From: kernel test robot
• [rt-devel:linux-6.8.y-rt] [serial] 0a81ac5ba5: Kernel_panic-not_syncing:No_working_init_found
  • From: kernel test robot
• Re: [PATCH v3 0/2] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal
  • From: Petr Mladek
• Re: [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Petr Mladek
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Petr Mladek
• Re: [PATCH v6 8/8] tty: i3c: add TTY over I3C master support
  • From: kernel test robot
• [PATCH v2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• RE: [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• RE: [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Tamseel Shams
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: John Ogness
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: John Ogness
• Re: [syzbot] Monthly serial report (Feb 2024)
  • From: Tony Lindgren
• Re: [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Jiri Slaby
• Re: [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Tony Lindgren
• Re: [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Masahiro Yamada
• Re: [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Masahiro Yamada
• [PATCH v3 2/2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Yoann Congal
• [PATCH v3 1/2] printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  • From: Yoann Congal
• [PATCH v3 0/2] printk: CONFIG_BASE_SMALL fix for LOG_CPU_MAX_BUF_SHIFT and removal
  • From: Yoann Congal
• Re: [GIT PULL] TTY/Serial driver fixes for 6.8-rc3
  • From: pr-tracker-bot
• [PATCH] serial: port: Don't suspend if the port is still busy
  • From: Yicong Yang
• [GIT PULL] TTY/Serial driver fixes for 6.8-rc3
  • From: Greg KH
• Re: [PATCH v8 02/13] dt-bindings: treewide: add access-controllers description
  • From: Wolfram Sang
• [PATCH 2/2] serial: core: make serial_base_bus_type const
  • From: Ricardo B. Marliere
• [PATCH 1/2] serdev: make serdev_bus_type const
  • From: Ricardo B. Marliere
• [PATCH 0/2] drivers: tty: struct bus_type cleanup
  • From: Ricardo B. Marliere
• Re: [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Tetsuo Handa
• [PATCH 2/2] arm64: dts: fsd: Add fifosize for UART in Device Tree
  • From: Tamseel Shams
• [PATCH 1/2] serial: samsung: honor fifosize from dts at first
  • From: Tamseel Shams
• [PATCH v6 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v6 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v6 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v6 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v6 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v6 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v6 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v6 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v6 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v5 1/8] i3c: add target mode support
  • From: kernel test robot
• [syzbot] Monthly serial report (Feb 2024)
  • From: syzbot
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH v5 1/8] i3c: add target mode support
  • From: kernel test robot
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Sam Protsenko
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [RFC PATCH v2 05/21] pnp.h: Return -EPROBE_DEFER for disabled IRQ resource in pnp_irq()
  • From: Sunil V L
• Re: [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Krzysztof Kozlowski
• [PATCH 22/22] tty: vt: decrypt magic constants in vc_is_control()
  • From: Jiri Slaby (SUSE)
• [PATCH 21/22] tty: vt: use ASCII enum constants in vt_console_print()
  • From: Jiri Slaby (SUSE)
• [PATCH 20/22] tty: vt: use switch+case in the ESgetpars case
  • From: Jiri Slaby (SUSE)
• [PATCH 19/22] tty: vt: use switch+case in the ESnonstd case
  • From: Jiri Slaby (SUSE)
• [PATCH 18/22] tty: vt: add new helper for reseting vc parameters
  • From: Jiri Slaby (SUSE)
• [PATCH 17/22] tty: vt: handle CSI+[ inside preexisting switch-case
  • From: Jiri Slaby (SUSE)
• [PATCH 16/22] tty: vt: simplify ansi_control_string()
  • From: Jiri Slaby (SUSE)
• [PATCH 15/22] tty: vt: name, reflow and document enum vc_ctl_state
  • From: Jiri Slaby (SUSE)
• [PATCH 14/22] tty: vt: move CSI ECMA handling to a separate function
  • From: Jiri Slaby (SUSE)
• [PATCH 13/22] tty: vt: move CSI DEC handling to a separate function
  • From: Jiri Slaby (SUSE)
• [PATCH 12/22] tty: vt: separate ESesc state handling into handle_esc()
  • From: Jiri Slaby (SUSE)
• [PATCH 11/22] tty: vt: extract ascii handling to handle_ascii()
  • From: Jiri Slaby (SUSE)
• [PATCH 10/22] tty: vt: accept u8 in do_con_trol() and vc_setGx()
  • From: Jiri Slaby (SUSE)
• [PATCH 09/22] tty: vt: put cases on separate lines
  • From: Jiri Slaby (SUSE)
• [PATCH 08/22] tty: vt: rename setterm_command() to csi_RSB()
  • From: Jiri Slaby (SUSE)
• [PATCH 07/22] tty: vt: define an enum for CSI+] codes
  • From: Jiri Slaby (SUSE)
• [PATCH 06/22] tty: vt: move CSI+n handling along to other ECMA CSIs
  • From: Jiri Slaby (SUSE)
• [PATCH 05/22] tty: vt: remove unneeded assignment of EPecma to vc_priv
  • From: Jiri Slaby (SUSE)
• [PATCH 04/22] tty: vt: split DEC CSI+h/l handling into csi_DEC_hl()
  • From: Jiri Slaby (SUSE)
• [PATCH 03/22] tty: vt: rename set_mode() to csi_hl()
  • From: Jiri Slaby (SUSE)
• [PATCH 02/22] tty: vt: define enums for CSI+h/l codes
  • From: Jiri Slaby (SUSE)
• [PATCH 01/22] tty: vt: make rgb_from_256() slighly more comprehensible
  • From: Jiri Slaby (SUSE)
• [PATCH 00/22] tty: vt: cleanup ESC sequences handling
  • From: Jiri Slaby (SUSE)
• [PATCH] tty: serial: samsung: Remove superfluous braces in macro
  • From: Sam Protsenko
• Re: [RFC PATCH v2 05/21] pnp.h: Return -EPROBE_DEFER for disabled IRQ resource in pnp_irq()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Stefan Wahren
• Re: [PATCH] Revert "tty: serial: amba-pl011: Remove QDF2xxx workarounds"
  • From: Mark Brown
• [PATCH] Revert "tty: serial: amba-pl011: Remove QDF2xxx workarounds"
  • From: Konrad Dybcio
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Mark Brown
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Emil Kronborg
• Re: [PATCH v2 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Emil Kronborg
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Greg KH
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Konrad Dybcio
• Re: This is classified as spam [was: [PATCH] tty: fix atomicity violation in n_tty_read]
  • From: Greg KH
• Re: [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Andy Shevchenko
• Re: [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: John Ogness
• Re: [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: John Ogness
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Christina Quast
• [PATCH v2 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby (SUSE)
• [PATCH v2 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby (SUSE)
• [PATCH v4 2/2] tty/sysrq: Dump printk ring buffer messages via sysrq
  • From: Sreenath Vijayan
• [PATCH v4 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Sreenath Vijayan
• [PATCH v4 0/2] Add support to dump printk buffer to console via sysrq
  • From: Sreenath Vijayan
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• This is classified as spam [was: [PATCH] tty: fix atomicity violation in n_tty_read]
  • From: Jiri Slaby
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer
• Re: [PATCH] tty: serial: manage irq with spin_lock_irqsave in SiFive console
  • From: Jiri Slaby
• [PATCH] tty: serial: manage irq with spin_lock_irqsave in SiFive console
  • From: Andy Chiu
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Peter Hilber
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: John Ogness
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Masahiro Yamada
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Mark Brown
• Re: [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Krzysztof Kozlowski
• Re: [PATCH v5 2/3] dt-bindings: serial: allow onewire as child node
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby
• Re: mxs-auart broken in v6.2 and onwards
  • From: Jiri Slaby
• [PATCH 2/2] serial: mxs-auart: fix tx
  • From: Jiri Slaby (SUSE)
• [PATCH 1/2] serial: core: introduce uart_port_tx_flags()
  • From: Jiri Slaby (SUSE)
• [PATCH] serial: 8250_pci1xxxx: partially revert off by one patch
  • From: Dan Carpenter
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Daniel Beer
• Re: [PATCH v5 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Rob Herring
• Re: [PATCH v5 1/6] dt-bindings: serial: Add binding for rs485 receiver enable GPIO
  • From: Rob Herring
• Re: [PATCH v5 1/3] dt-bindings: w1: UART 1-Wire bus
  • From: Rob Herring
• Re: Re: mxs-auart broken in v6.2 and onwards
  • From: Emil Kronborg
• Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Nathan Chancellor
• RE: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Christoph Niedermaier
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Rengarajan.S
• Re: mxs-auart broken in v6.2 and onwards
  • From: Jiri Slaby
• Re: [PATCH v5 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Krzysztof Kozlowski
• [PATCH v5 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v5 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v5 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v5 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v5 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v5 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v5 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v5 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v5 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Conor Dooley
• [PATCH 6.6 330/331] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: Greg Kroah-Hartman
• [PATCH 6.1 185/185] serial: core: fix kernel-doc for uart_port_unlock_irqrestore()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Luis Chamberlain
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Yoann Congal
• Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Quentin Schulz
• Re: [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Jiri Slaby
• Re: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• Re: [PATCH v8 0/7] Fixes and improvements for RS485
  • From: Lino Sanfilippo
• [tty:tty-testing] BUILD SUCCESS fccc9d9233f918ee50cf2955ae7134a7f3418351
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS b35f8dbbce818b02c730dc85133dc7754266e084
  • From: kernel test robot
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Conor Dooley
• [PATCH AUTOSEL 5.10 04/13] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 07/19] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 08/27] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 09/31] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
  • From: Sasha Levin
• [PATCH AUTOSEL 6.7 10/39] tty: serial: 8250: Set RS422 interface by default to fix Moxa RS422/RS485 PCIe boards
  • From: Sasha Levin
• [PATCH AUTOSEL 6.7 09/39] tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE
  • From: Sasha Levin
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Andy Shevchenko
• Re: [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Andy Shevchenko
• Re: [PATCH 2/2] serial: qcom-geni: Don't cancel/abort if we can't get the port lock
  • From: Bjorn Andersson
• Re: [PATCH v8 0/7] Fixes and improvements for RS485
  • From: Greg KH
• Re: [PATCH 1/2] soc: qcom: geni-se: Add M_TX_FIFO_NOT_EMPTY bit definition
  • From: Bjorn Andersson
• [PATCH v2] printk: Remove redundant CONFIG_BASE_SMALL
  • From: Yoann Congal
• mxs-auart broken in v6.2 and onwards
  • From: Emil Kronborg
• Re: [PATCH v4 5/8] i3c: target: add svc target controller support
  • From: kernel test robot
• Re: [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Lino Sanfilippo
• Re: [PATCH] treewide: Change CONFIG_BASE_SMALL to bool type
  • From: Masahiro Yamada
• Re: [PATCH] treewide: Change CONFIG_BASE_SMALL to bool type
  • From: Masahiro Yamada
• [PATCH v5 6/6] arm64: dts: rockchip: px30-ringneck-haikou: add rs485 support on uart5
  • From: Farouk Bouabid
• [PATCH v5 5/6] arm64: dts: rockchip: rk3399-puma-haikou: add rs485 support on uart2
  • From: Farouk Bouabid
• [PATCH v5 4/6] serial: 8250: set rx-enable gpio state when rs485 is disabled
  • From: Farouk Bouabid
• [PATCH v5 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• [PATCH v5 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Farouk Bouabid
• [PATCH v5 0/6] serial: 8250: Add support for rs485 half/full duplex on puma/ringneck-haikou
  • From: Farouk Bouabid
• [PATCH v5 1/6] dt-bindings: serial: Add binding for rs485 receiver enable GPIO
  • From: Farouk Bouabid
• [PATCH] treewide: Change CONFIG_BASE_SMALL to bool type
  • From: Yoann Congal
• [PATCH v5 1/3] dt-bindings: w1: UART 1-Wire bus
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v5 3/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v5 2/3] dt-bindings: serial: allow onewire as child node
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v5 0/3] w1: add UART w1 bus driver
  • From: Christoph Winklhofer via B4 Relay
• [PATCH v4 6/6] arm64: dts: rockchip: px30-ringneck-haikou: add rs485 support on uart5
  • From: Farouk Bouabid
• [PATCH v4 5/6] arm64: dts: rockchip: rk3399-puma-haikou: add rs485 support on uart2
  • From: Farouk Bouabid
• [PATCH v4 3/6] dt-bindings: serial: add binding for rs485 rx-enable state when rs485 is disabled
  • From: Farouk Bouabid
• [PATCH v4 2/6] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• [PATCH v4 4/6] serial: 8250: set rx-enable gpio state when rs485 is disabled
  • From: Farouk Bouabid
• [PATCH v4 1/6] dt-bindings: serial: Add binding for rs485 receiver enable GPIO
  • From: Farouk Bouabid
• [PATCH v4 0/6] serial: 8250: Add support for rs485 half/full duplex on puma/ringneck-haikou
  • From: Farouk Bouabid
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Lee Jones
• [PATCH v1 tty] 8250: microchip: Add 4 Mbps support in PCI1XXXX UART
  • From: Rengarajan S
• [PATCH v1 tty] 8250: microchip: pci1xxxx: Add Burst mode transmission support in uart driver for reading from FIFO
  • From: Rengarajan S
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Johan Hovold
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Alex Elder
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Maximilian Luz
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Rob Herring
• Re: [PATCH v4 8/8] tty: i3c: add TTY over I3C master support
  • From: Ilpo Järvinen
• Re: [PATCH v4 6/8] i3c: target: func: add tty driver
  • From: Ilpo Järvinen
• Re: [PATCH v4 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Ilpo Järvinen
• Re: [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Greg Kroah-Hartman
• Re: [PATCH] dt-bindings: serial: renesas,hscif: Document r8a779h0 bindings
  • From: Krzysztof Kozlowski
• Re: [PATCH] dt-bindings: serial: renesas,hscif: Document r8a779h0 bindings
  • From: Wolfram Sang
• Re: [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Ilpo Järvinen
• [PATCH] dt-bindings: serial: renesas,hscif: Document r8a779h0 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v3 3/5] serial: 8250: Support separate rs485 rx-enable GPIO
  • From: Farouk Bouabid
• [PATCH] tty: n_gsm: restrict tty devices to attach
  • From: Tetsuo Handa
• Re: [PATCH v3 0/8] I3C target mode support
  • From: Frank Li
• [PATCH v4 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v4 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v4 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v4 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v4 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v4 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v4 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v4 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v4 0/8] I3C target mode support
  • From: Frank Li
• Re: [PATCH v3 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Rob Herring
• [PATCH v3 8/8] tty: i3c: add TTY over I3C master support
  • From: Frank Li
• [PATCH v3 7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status
  • From: Frank Li
• [PATCH v3 6/8] i3c: target: func: add tty driver
  • From: Frank Li
• [PATCH v3 5/8] i3c: target: add svc target controller support
  • From: Frank Li
• [PATCH v3 4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h
  • From: Frank Li
• [PATCH v3 3/8] Documentation: i3c: Add I3C target mode controller and function
  • From: Frank Li
• [PATCH v3 2/8] dt-bindings: i3c: svc: add proptery mode
  • From: Frank Li
• [PATCH v3 1/8] i3c: add target mode support
  • From: Frank Li
• [PATCH v3 0/8] I3C target mode support
  • From: Frank Li
• [PATCH] serial: txx9: Add missing #include <asm/txx9/generic.h>
  • From: Geert Uytterhoeven
• [PATCH V10 3/3] tty: serial: uartps: Add rs485 support to uartps driver
  • From: Manikanta Guntupalli
• [PATCH V10 2/3] tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
  • From: Manikanta Guntupalli
• [PATCH V10 1/3] dt-bindings: Add reference to rs485.yaml
  • From: Manikanta Guntupalli
• [PATCH V10 0/3] Add rs485 support to uartps driver
  • From: Manikanta Guntupalli
• Re: [PATCH v2 46/47] tty: vt: fix up kernel-doc
  • From: Randy Dunlap
• [PATCH 6.6 512/583] serial: apbuart: fix console prompt on qemu
  • From: Greg Kroah-Hartman
• [PATCH 6.7 564/641] serial: apbuart: fix console prompt on qemu
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 00/47] tty: vt: cleanup and documentation
  • From: Helge Deller
• [PATCH v2] treewide, serdev: change receive_buf() return type to size_t
  • From: Francesco Dolcini
• RE: [PATCH V9 2/3] tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
  • From: Maarten Brock
• RE: [PATCH V9 2/3] tty: serial: uartps: Relocate cdns_uart_tx_empty to facilitate rs485
  • From: Maarten Brock
• [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
  • From: Konrad Dybcio
• Re: [PATCH] tty: vt: check for atomic context in con_write()
  • From: Tetsuo Handa
• [PATCH v2 31/47] tty: vt: stop using -1 for blank mode in consw::con_blank()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 22/47] tty: vt: remove checks for count in consw::con_clear() implementations
  • From: Jiri Slaby (SUSE)
• [PATCH v2 12/47] tty: vt: reflow csi_J()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 47/47] Documentation: add console.rst
  • From: Jiri Slaby (SUSE)
• [PATCH v2 46/47] tty: vt: fix up kernel-doc
  • From: Jiri Slaby (SUSE)
• [PATCH v2 45/47] tty: vt: document the rest of struct consw
  • From: Jiri Slaby (SUSE)
• [PATCH v2 44/47] tty: vt: remove unused consw::con_flush_scrollback()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 43/47] tty: vt: remove consw::con_getxy()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 27/47] consoles: use if instead of switch-case in consw::con_cursor()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 42/47] fbcon: remove fbcon_getxy()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 41/47] tty: vt: make types of screenpos() more consistent
  • From: Jiri Slaby (SUSE)
• [PATCH v2 40/47] tty: vt: remove consw::con_screen_pos()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 39/47] fbcon: remove consw::con_screen_pos()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 38/47] tty: vt: change consw::con_set_origin() return type
  • From: Jiri Slaby (SUSE)
• [PATCH v2 37/47] tty: vt: make consw::con_font_default()'s name const
  • From: Jiri Slaby (SUSE)
• [PATCH v2 36/47] tty: vt: make font of consw::con_font_set() const
  • From: Jiri Slaby (SUSE)
• [PATCH v2 35/47] tty: vt: make types around consw::con_blank() bool
  • From: Jiri Slaby (SUSE)
• [PATCH v2 34/47] tty: vt: use enum constants for VESA blanking modes
  • From: Jiri Slaby (SUSE)
• [PATCH v2 33/47] tty: vt: use VESA blanking constants
  • From: Jiri Slaby (SUSE)
• [PATCH v2 15/47] tty: vt: define an enum for CSI+K codes
  • From: Jiri Slaby (SUSE)
• [PATCH v2 32/47] tty: vt: define a common enum for VESA blanking constants
  • From: Jiri Slaby (SUSE)
• [PATCH v2 30/47] tty: vt: make consw::con_switch() return a bool
  • From: Jiri Slaby (SUSE)
• [PATCH v2 29/47] tty: vt: remove CM_* constants
  • From: Jiri Slaby (SUSE)
• [PATCH v2 28/47] fbdev/core: simplify cursor_state setting in fbcon_ops::cursor()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 26/47] tty: vt: sanitize consw::con_putcs() parameters
  • From: Jiri Slaby (SUSE)
• [PATCH v2 25/47] tty: vt: sanitize consw::con_putc() parameters
  • From: Jiri Slaby (SUSE)
• [PATCH v2 10/47] tty: vt: use case ranges for CSI+m fg/bg colors
  • From: Jiri Slaby (SUSE)
• [PATCH v2 24/47] tty: vt: eliminate unneeded consw::con_putc() implementations
  • From: Jiri Slaby (SUSE)
• [PATCH v2 23/47] tty: vt: add con_putc() helper
  • From: Jiri Slaby (SUSE)
• [PATCH v2 21/47] tty: vt: sanitize arguments of consw::con_clear()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 20/47] tty: vt: make init parameter of consw::con_init() a bool
  • From: Jiri Slaby (SUSE)
• [PATCH v2 19/47] tty: vt: make consw::con_debug_*() return void
  • From: Jiri Slaby (SUSE)
• [PATCH v2 06/47] tty: vt: push console lock from tioclinux() down to 2 functions
  • From: Jiri Slaby (SUSE)
• [PATCH v2 18/47] tty: vt: remove extern from functions in selection.h
  • From: Jiri Slaby (SUSE)
• [PATCH v2 13/47] use clamp() for counts in csi_?() handlers
  • From: Jiri Slaby (SUSE)
• [PATCH v2 17/47] tty: vt: define an enum for ascii characters
  • From: Jiri Slaby (SUSE)
• [PATCH v2 16/47] tty: vt: reflow csi_K()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 14/47] don't pass vc->vc_par[0] to csi_?() handlers
  • From: Jiri Slaby (SUSE)
• [PATCH v2 11/47] tty: vt: define an enum for CSI+J codes
  • From: Jiri Slaby (SUSE)
• [PATCH v2 09/47] tty: vt: define an enum for CSI+m codes
  • From: Jiri Slaby (SUSE)
• [PATCH v2 08/47] tty: vt: make vc_is_sel()'s vc const
  • From: Jiri Slaby (SUSE)
• [PATCH v2 07/47] tty: vt: pass vc_resize_user as a parameter
  • From: Jiri Slaby (SUSE)
• [PATCH v2 05/47] tty: vt: pass proper pointers from tioclinux()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 04/47] tty: vt: expect valid vc when in tty ops
  • From: Jiri Slaby (SUSE)
• [PATCH v2 03/47] tty: vt: fix 20 vs 0x20 typo in EScsiignore
  • From: Jiri Slaby (SUSE)
• [PATCH v2 02/47] fbcon: make display_desc a static array in fbcon_startup()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 01/47] vgacon: inline vc_scrolldelta_helper() into vgacon_scrolldelta()
  • From: Jiri Slaby (SUSE)
• [PATCH v2 00/47] tty: vt: cleanup and documentation
  • From: Jiri Slaby (SUSE)
• serial:support: Using 8250 driver With MOXA CP-132EL Device
  • From: Federico Vaga
• Re: [PATCH] dt-bindings: serial: fsl-lpuart: support i.MX95
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: vt: check for atomic context in con_write()
  • From: Jiri Slaby
• [PATCH] dt-bindings: serial: fsl-lpuart: support i.MX95
  • From: Peng Fan (OSS)
• Re: [PATCH] tty: vt: check for atomic context in con_write()
  • From: Tetsuo Handa
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• Re: [PATCH] tty: vt: check for atomic context in con_write()
  • From: Hillf Danton
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Daniel Beer
• Re: [PATCH v6 0/5] RISC-V SBI debug console extension support
  • From: patchwork-bot+linux-riscv
• Re: [PATCH v4 RESEND] hid-ft260: Add serial driver
  • From: Michael Zaidman
• [PATCH] tty: vt: check for atomic context in con_write()
  • From: Tetsuo Handa
• Re: [PATCH v3 1/2] printk: Add function to dump printk buffer directly to consoles
  • From: Sreenath Vijayan
• Re: [PATCH v2] tty: hvc: Fix the RISC-V SBI driver for a refactoring
  • From: Palmer Dabbelt
• Re: [PATCH v5 0/5] RISC-V SBI debug console extension support
  • From: Anup Patel
• Re: [PATCH v2] tty: hvc: Fix the RISC-V SBI driver for a refactoring
  • From: Anup Patel
• [PATCH v2] tty: hvc: Fix the RISC-V SBI driver for a refactoring
  • From: Palmer Dabbelt
• Re: [PATCH v9 02/13] dt-bindings: treewide: add access-controllers description
  • From: Rob Herring
• Re: [PATCH] tty: hvc: Fix the RISC-V SBI driver for a refactoring
  • From: Palmer Dabbelt
• Re: [PATCH v5 0/5] RISC-V SBI debug console extension support
  • From: Palmer Dabbelt
• [PATCH] tty: hvc: Fix the RISC-V SBI driver for a refactoring
  • From: Palmer Dabbelt
• Re: [PATCH v2 2/7] dt-bindings: i3c: svc: add compatible string i3c: silvaco,i3c-target-v1
  • From: Frank Li
• Re: [PATCH v2 01/19] tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT
  • From: Sam Protsenko
• Re: [PATCH v2 02/19] dt-bindings: serial: samsung: do not allow reg-io-width for gs101
  • From: Sam Protsenko
• [PATCH V3] tty: serial: Fix bit order in RS485 flag definitions
  • From: Christoph Niedermaier
• RE: [PATCH V2] tty: serial: Fix bit order in RS485 flag definitions
  • From: Christoph Niedermaier
• [PATCH v6 5/5] RISC-V: Enable SBI based earlycon support
  • From: Anup Patel
• [PATCH v6 4/5] tty: Add SBI debug console support to HVC SBI driver
  • From: Anup Patel
• [PATCH v6 3/5] tty/serial: Add RISC-V SBI debug console based earlycon
  • From: Anup Patel