[PATCH v7 0/3] serial: 8250_pnp: Support configurable reg shift property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Guanbing Huang <albanhuang@xxxxxxxxxxx>

The 16550a serial port based on the ACPI table requires obtaining the
reg-shift attribute. In the ACPI scenario, If the reg-shift property
is not configured like in DTS, the 16550a serial driver cannot read or
write controller registers properly during initialization.

To address the issue of configuring the reg-shift property, the 
__uart_read_properties() universal interface is called to implement it.
Adaptation of PNP devices is done in the __uart_read_properties() function.

Guanbing Huang (3):
  PNP: Add dev_is_pnp() macro
  serial: port: Add support of PNP IRQ to __uart_read_properties()
  serial: 8250_pnp: Support configurable reg shift property

 drivers/tty/serial/8250/8250_pnp.c | 40 +++++++++++++++++++-----------
 drivers/tty/serial/serial_port.c   |  7 +++++-
 include/linux/pnp.h                |  4 +++
 3 files changed, 35 insertions(+), 16 deletions(-)

-- 
2.17.1





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux