Re: [PATCH v6 0/3] serial: 8250_pnp: Support configurable reg shift property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 09, 2024 at 03:43:20PM +0800, Guanbing Huang wrote:
> From: Guanbing Huang <albanhuang@xxxxxxxxxxx>
> 
> The 16550a serial port based on the ACPI table requires obtaining the
> reg-shift attribute. In the ACPI scenario, If the reg-shift property
> is not configured like in DTS, the 16550a serial driver cannot read or
> write controller registers properly during initialization.
> 
> To address the issue of configuring the reg-shift property, the 
> __uart_read_properties() universal interface is called to implement it.
> Adaptation of PNP devices is done in the __uart_read_properties() function.

You either forgot or deliberately not added my tag. Can you elaborate?

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux