There is no user of the struct plat_max3100 outside the driver.
Inline its contents into the driver. While at it, drop outdated
example in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/max3100.c | 38 +++++++++++++--------------
include/linux/serial_max3100.h | 48 ----------------------------------
2 files changed, 18 insertions(+), 68 deletions(-)
delete mode 100644 include/linux/serial_max3100.h
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 3d2b83d6ab51..031803a5da58 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -1,6 +1,5 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- *
* Copyright (C) 2008 Christian Pellegrin <chripell@xxxxxxxxxxxx>
*
* Notes: the MAX3100 doesn't provide an interrupt on CTS so we have
@@ -8,24 +7,6 @@
* writing conf clears FIFO buffer and we cannot have this interrupt
* always asking us for attention.
*
- * Example platform data:
-
- static struct plat_max3100 max3100_plat_data = {
- .loopback = 0,
- .crystal = 0,
- .poll_time = 100,
- };
-
- static struct spi_board_info spi_board_info[] = {
- {
- .modalias = "max3100",
- .platform_data = &max3100_plat_data,
- .irq = IRQ_EINT12,
- .max_speed_hz = 5*1000*1000,
- .chip_select = 0,
- },
- };
-
* The initial minor number is 209 in the low-density serial port:
* mknod /dev/ttyMAX0 c 204 209
*/
@@ -49,7 +30,24 @@
#include <asm/unaligned.h>
-#include <linux/serial_max3100.h>
+/**
+ * struct plat_max3100 - MAX3100 SPI UART platform data
+ * @loopback: force MAX3100 in loopback
+ * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
+ * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook
+ * called on suspend and resume to activate it.
+ * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
+ * flow ctrl is possible but you have less CPU usage)
+ *
+ * You should use this structure in your machine description to specify
+ * how the MAX3100 is connected.
+ */
+struct plat_max3100 {
+ int loopback;
+ int crystal;
+ void (*max3100_hw_suspend) (int suspend);
+ int poll_time;
+};
#define MAX3100_C (1<<14)
#define MAX3100_D (0<<14)
diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h
deleted file mode 100644
index befd55c08a7c..000000000000
--- a/include/linux/serial_max3100.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *
- * Copyright (C) 2007 Christian Pellegrin
- */
-
-
-#ifndef _LINUX_SERIAL_MAX3100_H
-#define _LINUX_SERIAL_MAX3100_H 1
-
-
-/**
- * struct plat_max3100 - MAX3100 SPI UART platform data
- * @loopback: force MAX3100 in loopback
- * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
- * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook
- * called on suspend and resume to activate it.
- * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
- * flow ctrl is possible but you have less CPU usage)
- *
- * You should use this structure in your machine description to specify
- * how the MAX3100 is connected. Example:
- *
- * static struct plat_max3100 max3100_plat_data = {
- * .loopback = 0,
- * .crystal = 0,
- * .poll_time = 100,
- * };
- *
- * static struct spi_board_info spi_board_info[] = {
- * {
- * .modalias = "max3100",
- * .platform_data = &max3100_plat_data,
- * .irq = IRQ_EINT12,
- * .max_speed_hz = 5*1000*1000,
- * .chip_select = 0,
- * },
- * };
- *
- **/
-struct plat_max3100 {
- int loopback;
- int crystal;
- void (*max3100_hw_suspend) (int suspend);
- int poll_time;
-};
-
-#endif
--
2.43.0.rc1.1.gbec44491f096
