From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> In case the UART port is used as a console, no_console_suspend is available in bootargs and UART port is part of a software-controlled power domain we need to call device_set_awake_path(). This lets the power domain core code know that this domain should not be powered off during system suspend. Otherwise, the UART port power domain is turned off, nothing is printed while suspending and the suspend/resume process is blocked. This was detected on the Renesas RZ/G3S SoC while adding support for power domains. Based on code investigation, this issue is present on other SoCs (e.g., Renesas R-Mobile A1 [1], IMX8QXP [2]) and different SoCs have particular implementation to handle it. Due to this the patch added the call of device_set_awake_path() in uart_suspend_port() instead of having it in the platform specific UART driver. [1] https://elixir.bootlin.com/linux/v6.9-rc5/source/drivers/pmdomain/renesas/rmobile-sysc.c#L116 [2] https://elixir.bootlin.com/linux/v6.9-rc5/source/drivers/pmdomain/imx/scu-pd.c#L357 Suggested-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Suggested-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> --- Changes in v2: - used device_set_awake_path() instead of device_set_wakeup_path() - moved the support in uart_suspend_port() to make it generic for other drivers - fixed typos in commit description - updated the commit description to reflect the new changes and the fact that support may be applied to other SoCs - added Suggested-by tag; this was initially proposed by Ulf to move it in the serial driver then Geert propose to have it more generic in uart_suspend_port() drivers/tty/serial/serial_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index d8d797a7a1e3..6270baab668c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2409,6 +2409,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) uport->ops->stop_rx(uport); uart_port_unlock_irq(uport); } + device_set_awake_path(uport->dev); goto unlock; } -- 2.39.2
