On Mon, 22 Apr 2024 08:51:08 +0200, Christoph Fritz wrote: > Add documentation of device tree bindings for serdev UART LIN-Bus > devices equipped with LIN transceivers. > > Signed-off-by: Christoph Fritz <christoph.fritz@xxxxxxxxx> > --- > .../bindings/net/can/linux,lin-serdev.yaml | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/can/linux,lin-serdev.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/linux,lin-serdev.yaml: 'maintainers' is a required property hint: Metaschema for devicetree binding documentation from schema $id: http://devicetree.org/meta-schemas/base.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/linux,lin-serdev.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property hint: Either unevaluatedProperties or additionalProperties must be present from schema $id: http://devicetree.org/meta-schemas/core.yaml# Error: Documentation/devicetree/bindings/net/can/linux,lin-serdev.example.dts:18.9-15 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/net/can/linux,lin-serdev.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2 make: *** [Makefile:240: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240422065114.3185505-6-christoph.fritz@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
