On Mon, 22 Apr 2024 16:32:15 +0300
Konstantin Pugin <ria.freelander@xxxxxxxxx> wrote:
Hi Konstantin,
> XR20M1172 register set is mostly compatible with SC16IS762, but it has
> a support for additional division rates of UART with special DLD register.
> So, add handling this register by appropriate devicetree bindings.
>
> Signed-off-by: Konstantin Pugin <ria.freelander@xxxxxxxxx>
> ---
> drivers/tty/serial/Kconfig | 3 +-
> drivers/tty/serial/sc16is7xx.c | 61 ++++++++++++++++++++++++++++--
> drivers/tty/serial/sc16is7xx.h | 1 +
> drivers/tty/serial/sc16is7xx_i2c.c | 1 +
> drivers/tty/serial/sc16is7xx_spi.c | 1 +
> 5 files changed, 62 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 4fdd7857ef4d..9d0438cfe147 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1029,7 +1029,7 @@ config SERIAL_SC16IS7XX_CORE
> select SERIAL_SC16IS7XX_SPI if SPI_MASTER
> select SERIAL_SC16IS7XX_I2C if I2C
> help
> - Core driver for NXP SC16IS7xx UARTs.
> + Core driver for NXP SC16IS7xx and compatible UARTs.
> Supported ICs are:
>
> SC16IS740
> @@ -1038,6 +1038,7 @@ config SERIAL_SC16IS7XX_CORE
> SC16IS752
> SC16IS760
> SC16IS762
> + XR20M1172 (Exar)
>
> The driver supports both I2C and SPI interfaces.
>
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index dfcc804f558f..09c9e52d7ec2 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -10,6 +10,7 @@
> #undef DEFAULT_SYMBOL_NAMESPACE
> #define DEFAULT_SYMBOL_NAMESPACE SERIAL_NXP_SC16IS7XX
>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> @@ -68,6 +69,7 @@
> /* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
> #define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */
> #define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */
> +#define XR20M117X_DLD_REG (0x02) /* Divisor Fractional Register */
>
> /* Enhanced Register set: Only if (LCR == 0xBF) */
> #define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */
> @@ -221,6 +223,20 @@
> #define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0)
> #define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4)
>
> +/*
> + * Divisor Fractional Register bits (EXAR extension).
> + * EXAR hardware is mostly compatible with SC16IS7XX, but supports additional feature:
> + * 4x and 8x divisor, instead of default 16x. It has a special register to program it.
> + * Bits 0 to 3 is fractional divisor, it used to set value of last 16 bits of
> + * uartclk * (16 / divisor) / baud, in case of default it will be uartclk / baud.
> + * Bits 4 and 5 used as switches, and should not be set to 1 simultaneously.
> + */
> +
> +#define XR20M117X_DLD_16X 0
> +#define XR20M117X_DLD_DIV_MASK GENMASK(3, 0)
> +#define XR20M117X_DLD_8X BIT(4)
> +#define XR20M117X_DLD_4X BIT(5)
> +
> /*
> * TLR register bits
> * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
> @@ -523,6 +539,13 @@ const struct sc16is7xx_devtype sc16is762_devtype = {
> };
> EXPORT_SYMBOL_GPL(sc16is762_devtype);
>
> +const struct sc16is7xx_devtype xr20m1172_devtype = {
> + .name = "XR20M1172",
> + .nr_gpio = 8,
> + .nr_uart = 2,
> +};
> +EXPORT_SYMBOL_GPL(xr20m1172_devtype);
> +
> static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
> {
> switch (reg) {
> @@ -555,18 +578,43 @@ static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg)
> return reg == SC16IS7XX_RHR_REG;
> }
>
> +static bool sc16is7xx_has_dld(struct device *dev)
> +{
> + struct sc16is7xx_port *s = dev_get_drvdata(dev);
> +
> + if (s->devtype == &xr20m1172_devtype)
> + return true;
> + return false;
> +}
> +
> static int sc16is7xx_set_baud(struct uart_port *port, int baud)
> {
> struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
> - u8 lcr;
> + unsigned long clk = port->uartclk, div, div16;
> + bool has_dld = sc16is7xx_has_dld(port->dev);
> + u8 dld_mode = XR20M117X_DLD_16X;
> u8 prescaler = 0;
> - unsigned long clk = port->uartclk, div = clk / 16 / baud;
> + u8 divisor = 16;
> + u8 lcr;
> +
> + if (has_dld && DIV_ROUND_CLOSEST(clk, baud) < 16)
> + divisor = rounddown_pow_of_two(DIV_ROUND_CLOSEST(clk, baud));
> +
> + div16 = (clk * 16) / divisor / baud;
> + div = div16 / 16;
>
> if (div >= BIT(16)) {
> prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
> div /= 4;
> }
>
> + /* Count additional divisor for EXAR devices */
> + if (divisor == 8)
> + dld_mode = XR20M117X_DLD_8X;
> + if (divisor == 4)
> + dld_mode = XR20M117X_DLD_4X;
> + dld_mode |= FIELD_PREP(XR20M117X_DLD_DIV_MASK, div16);
> +
> /* Enable enhanced features */
> sc16is7xx_efr_lock(port);
> sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
> @@ -587,12 +635,14 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
> regcache_cache_bypass(one->regmap, true);
> sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
> sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
> + if (has_dld)
> + sc16is7xx_port_write(port, XR20M117X_DLD_REG, dld_mode);
> regcache_cache_bypass(one->regmap, false);
>
> /* Restore LCR and access to general register set */
> sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
>
> - return DIV_ROUND_CLOSEST(clk / 16, div);
> + return DIV_ROUND_CLOSEST(clk / divisor, div);
> }
>
> static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
> @@ -1002,6 +1052,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> const struct ktermios *old)
> {
> struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
> + bool has_dld = sc16is7xx_has_dld(port->dev);
> + u8 divisor = has_dld ? 4 : 16
You are missing a semicolumn here, and compilation aborts. Looks like
you didn't test.
Hugo.
> unsigned int lcr, flow = 0;
> int baud;
> unsigned long flags;
> @@ -1084,7 +1136,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> /* Get baud rate generator configuration */
> baud = uart_get_baud_rate(port, termios, old,
> port->uartclk / 16 / 4 / 0xffff,
> - port->uartclk / 16);
> + port->uartclk / divisor);
>
> /* Setup baudrate generator */
> baud = sc16is7xx_set_baud(port, baud);
> @@ -1684,6 +1736,7 @@ void sc16is7xx_remove(struct device *dev)
> EXPORT_SYMBOL_GPL(sc16is7xx_remove);
>
> const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
> + { .compatible = "exar,xr20m1172", .data = &xr20m1172_devtype, },
> { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, },
> { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, },
> { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, },
> diff --git a/drivers/tty/serial/sc16is7xx.h b/drivers/tty/serial/sc16is7xx.h
> index afb784eaee45..eb2e3bc86f15 100644
> --- a/drivers/tty/serial/sc16is7xx.h
> +++ b/drivers/tty/serial/sc16is7xx.h
> @@ -28,6 +28,7 @@ extern const struct sc16is7xx_devtype sc16is750_devtype;
> extern const struct sc16is7xx_devtype sc16is752_devtype;
> extern const struct sc16is7xx_devtype sc16is760_devtype;
> extern const struct sc16is7xx_devtype sc16is762_devtype;
> +extern const struct sc16is7xx_devtype xr20m1172_devtype;
>
> const char *sc16is7xx_regmap_name(u8 port_id);
>
> diff --git a/drivers/tty/serial/sc16is7xx_i2c.c b/drivers/tty/serial/sc16is7xx_i2c.c
> index 3ed47c306d85..839de902821b 100644
> --- a/drivers/tty/serial/sc16is7xx_i2c.c
> +++ b/drivers/tty/serial/sc16is7xx_i2c.c
> @@ -46,6 +46,7 @@ static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
> { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
> { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
> { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
> + { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
> diff --git a/drivers/tty/serial/sc16is7xx_spi.c b/drivers/tty/serial/sc16is7xx_spi.c
> index 73df36f8a7fd..2b278282dbd0 100644
> --- a/drivers/tty/serial/sc16is7xx_spi.c
> +++ b/drivers/tty/serial/sc16is7xx_spi.c
> @@ -69,6 +69,7 @@ static const struct spi_device_id sc16is7xx_spi_id_table[] = {
> { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
> { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
> { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
> + { "xr20m1172", (kernel_ulong_t)&xr20m1172_devtype, },
> { }
> };
> MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
> --
> 2.34.1
>
>
>
--
Hugo Villeneuve
