Linux Serial

• Thread Index

• Re: [PATCH 6/7] serial: sh-sci: make RX FIFO parameters tunable via sysfs
  • From: Geert Uytterhoeven
• Re: [PATCH 4/7] serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIF
  • From: Geert Uytterhoeven
• Re: [PATCH 3/7] serial: sh-sci: implement FIFO threshold register setting
  • From: Geert Uytterhoeven
• Re: [PATCH 2/7] serial: sh-sci: consider DR (data ready) bit adequately
  • From: Geert Uytterhoeven
• Re: [PATCH 1/7] serial: sh-sci: add FIFO trigger bits
  • From: Geert Uytterhoeven
• [PATCH] serial: fsl_lpuart: Remove the alias node dependence
  • From: Yuan Yao
• [GIT PULL] TTY/Serial driver changes for 4.10-rc1
  • From: Greg KH
• [PATCH] tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
  • From: Richard Genoud
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH 3/7] serial: sh-sci: implement FIFO threshold register setting
  • From: Sergei Shtylyov
• Re: [PATCH] Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  • From: Daniel Jędrychowski
• [PATCH] tty: serial: lantiq: implement earlycon support
  • From: Martin Blumenstingl
• [PATCH] Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  • From: Daniel Jedrychowski
• Re: [PATCH] Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  • From: Greg KH
• Re: [PATCH] Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  • From: Greg KH
• Re: [PATCH] Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  • From: Greg Kroah-Hartman
• [PATCH] Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  • From: Herbert Xu
• Re: [PATCH] tty: serial_core: Using a better pattern with WARN_ON()
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: fsl_lpuart: potential NULL dereference
  • From: Greg Kroah-Hartman
• [PATCH] tty: serial: fsl_lpuart: potential NULL dereference
  • From: Alexey Khoroshilov
• [PATCH 7/7] arm64: dts: r8a7796: salvator-x: add SCIF1 (DEBUG1)
  • From: Ulrich Hecht
• [PATCH 6/7] serial: sh-sci: make RX FIFO parameters tunable via sysfs
  • From: Ulrich Hecht
• [PATCH 5/7] serial: sh-sci: SCIFA/B RX FIFO software timeout
  • From: Ulrich Hecht
• [PATCH 4/7] serial: sh-sci: increase RX FIFO trigger defaults for (H)SCIF
  • From: Ulrich Hecht
• [PATCH 3/7] serial: sh-sci: implement FIFO threshold register setting
  • From: Ulrich Hecht
• [PATCH 2/7] serial: sh-sci: consider DR (data ready) bit adequately
  • From: Ulrich Hecht
• [PATCH 1/7] serial: sh-sci: add FIFO trigger bits
  • From: Ulrich Hecht
• [PATCH 0/7] Renesas *SCIF* RX FIFO support
  • From: Ulrich Hecht
• [PATCH] 8250_pci: Fix potential use-after-free in error path
  • From: Gabriel Krisman Bertazi
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Mark Salter
• Re: [PATCH v1 1/1] serial: 8250_dw: Allow hardware flow control to be used
  • From: Andy Shevchenko
• [PATCH] tty: serial_core: Using a better pattern with WARN_ON()
  • From: Srikant Ritolia
• Re: [PATCH] tty: serial_core: Clear TTY_IO_ERROR iftty_port_open()return 0
  • From: 陈华才
• Re: [PATCH] tty: serial_core: Clear TTY_IO_ERROR if tty_port_open()return 0
  • From: Rob Herring
• Re: [PATCH] tty: serial_core: Clear TTY_IO_ERROR if tty_port_open()return 0
  • From: 陈华才
• Re: [PATCH v2] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Stefan Agner
• [PATCH v1 1/1] serial: 8250_dw: Allow hardware flow control to be used
  • From: Jason Uy
• [PATCH v1 0/1] serial: 8250_dw: Allow hardware flow control to be used
  • From: Jason Uy
• Re: [RFC v2 3/4] ACPI: DBG2: add 16550 UART with 32-bit access
  • From: Rafael J. Wysocki
• Re: [RFC v2 3/4] ACPI: DBG2: add 16550 UART with 32-bit access
  • From: Jon Masters
• Re: [RFC v2 3/4] ACPI: DBG2: add 16550 UART with 32-bit access
  • From: Rafael J. Wysocki
• Re: [RFC v2 0/4] ACPI: SPCR: 32-bit access and non-standard baud rate
  • From: Jon Masters
• [RFC v2 1/4] ACPI: SPCR: check bit width for the 16550 UART
  • From: Aleksey Makarov
• [RFC v2 3/4] ACPI: DBG2: add 16550 UART with 32-bit access
  • From: Aleksey Makarov
• [RFC v2 4/4] ACPI: SPCR: support 16550 UART with 32-bit access
  • From: Aleksey Makarov
• [RFC v2 2/4] ACPI: SPCR: don't initialize baud rate
  • From: Aleksey Makarov
• [RFC v2 0/4] ACPI: SPCR: 32-bit access and non-standard baud rate
  • From: Aleksey Makarov
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: One Thousand Gnomes
• Re: [PATCH 1/1] serial/uuc_uart: Set shutdown timeout to CONFIG_HZ independent 2ms
  • From: Timur Tabi
• Re: [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Peter Griffin
• Re: [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Lee Jones
• Re: [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Lee Jones
• Re: [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Peter Griffin
• [PATCH] tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
  • From: Richard Genoud
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Aleksey Makarov
• Re: [PATCH 1/3] ARM: dts: STiH410-b2260: Identify the UART RTS line
  • From: Patrice Chotard
• Re: [PATCH 1/1] serial/uuc_uart: Set shutdown timeout to CONFIG_HZ independent 2ms
  • From: Alexander Stein
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Duc Dang
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Duc Dang
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Duc Dang
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Jon Masters
• Re: [PATCH] SPCR: check bit width for the 16550 UART
  • From: Duc Dang
• Re: [PATCH 1/1] serial/uuc_uart: Set shutdown timeout to CONFIG_HZ independent 2ms
  • From: Timur Tabi
• [PATCH 1/1] serial/uuc_uart: Set shutdown timeout to CONFIG_HZ independent 2ms
  • From: Alexander Stein
• Re: [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Patrice Chotard
• [PATCH] SPCR: check bit width for the 16550 UART
  • From: Aleksey Makarov
• [PATCH] serial: max310x: Add support for newer silicon revisions
  • From: Alexander Shiyan
• [PATCH v2] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Nikita Yushchenko
• Re: [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Bhuvanchandra DV
• Re: [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Bhuvanchandra DV
• [PATCH 1/1] tty: serial: set error code when kasprintf fails
  • From: Pan Bian
• Re: [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Nikita Yushchenko
• Re: [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Nikita Yushchenko
• Re: [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Stefan Agner
• Re: Atmel: RS485 half duplex with DMA issue
  • From: Gil Weber
• [PATCH 2/3] serial: st-asc: Provide RTS functionality
  • From: Lee Jones
• [PATCH 3/3] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled
  • From: Lee Jones
• [PATCH 1/3] ARM: dts: STiH410-b2260: Identify the UART RTS line
  • From: Lee Jones
• [PATCH 1/2] serial: sh-sci: Fix early deassertion of dedicated RTS
  • From: Geert Uytterhoeven
• [PATCH 0/2] serial: sh-sci: Assorted flow control fixes
  • From: Geert Uytterhoeven
• [PATCH 2/2] serial: sh-sci: Fix hang in sci_reset()
  • From: Geert Uytterhoeven
• [PATCH] tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
  • From: Nikita Yushchenko
• Re: Atmel: RS485 half duplex with DMA issue
  • From: Richard Genoud
• Re: Atmel: RS485 half duplex with DMA issue
  • From: Greg KH
• Re: [PATCH 32/39] Annotate hardware config module parameters in drivers/tty/
  • From: Greg Kroah-Hartman
• Atmel: RS485 half duplex with DMA issue
  • From: Gil Weber
• [PATCH 32/39] Annotate hardware config module parameters in drivers/tty/
  • From: David Howells
• Re: [PATCH] serial: 8250_mid fix calltrace when hotplug 8250 serial controller
  • From: Andy Shevchenko
• [PATCH] tty: serial_core: Using a better pattern with WARN_ON()
  • From: Srikant Ritolia
• [PATCH] serial: 8250_mid fix calltrace when hotplug 8250 serial controller
  • From: Song liwei
• Re: [PATCH v2, variant B] tty: nozomi: avoid sprintf buffer overflow
  • From: Greg Kroah-Hartman
• [PATCH v2, variant A] tty: nozomi: avoid sprintf buffer overflow
  • From: Arnd Bergmann
• [PATCH v2, variant B] tty: nozomi: avoid sprintf buffer overflow
  • From: Arnd Bergmann
• [PATCH] serial: 8250_pci: Detach low-level driver during PCI error recovery
  • From: Gabriel Krisman Bertazi
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Florian Fainelli
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• Re: Potential double-lock BUG in drivers/tty/serial/sh-sci.c (Linux 4.9)
  • From: Iago Abal
• Re: Potential double-lock BUG in drivers/tty/serial/sh-sci.c (Linux 4.9)
  • From: Iago Abal
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: Potential double-lock BUG in drivers/tty/serial/sh-sci.c (Linux 4.9)
  • From: Geert Uytterhoeven
• Potential double-lock BUG in drivers/tty/serial/sh-sci.c (Linux 4.9)
  • From: Iago Abal
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Mathieu Poirier
• [PATCH v2 1/1] serial: core: don't check port twice in a row
  • From: Andy Shevchenko
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Greg Kroah-Hartman
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• Re: [PATCH 4/4] serial: imx: Add LED trigger support
  • From: kbuild test robot
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: kbuild test robot
• Re: [PATCH 2/4] serial: 8250: Add LED trigger support
  • From: kbuild test robot
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Florian Fainelli
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Mathieu Poirier
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH v2 1/2] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• Re: [PATCH 1/4] serial: core: Add LED trigger support
  • From: Greg Kroah-Hartman
• serial: Add LED trigger support
  • From: Sascha Hauer
• [PATCH 3/4] serial: cpm_uart: Add LED trigger support
  • From: Sascha Hauer
• [PATCH 2/4] serial: 8250: Add LED trigger support
  • From: Sascha Hauer
• [PATCH 1/4] serial: core: Add LED trigger support
  • From: Sascha Hauer
• [PATCH 4/4] serial: imx: Add LED trigger support
  • From: Sascha Hauer
• Re: [PATCH v2 1/2] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/2] serial: introduce DSR handling property
  • From: Uwe Kleine-König
• [PATCH 2/2] serial: imx: make DSR irq handling conditional
  • From: Christoph Fritz
• [PATCH 1/2] doc: DT: add generic serial property to disable DSR
  • From: Christoph Fritz
• [PATCH 0/2] serial: introduce DSR handling property
  • From: Christoph Fritz
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCH] tty: serial_core: Clear TTY_IO_ERROR if tty_port_open() return 0
  • From: Rob Herring
• Re: [PATCH v2 1/2] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: John Garry
• Re: [PATCH v2 1/2] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: serial: imx: regression triggered by newly introduced DSR irq handling
  • From: Uwe Kleine-König
• Re: serial: imx: regression triggered by newly introduced DSR irq handling
  • From: Christoph Fritz
• [PATCH] tty: serial_core: Clear TTY_IO_ERROR if tty_port_open() return 0
  • From: Huacai Chen
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• [PATCH v2 2/2] serial: core: don't check port twice in a row
  • From: Andy Shevchenko
• [PATCH v2 0/2] serial: core: make static analyzer happy
  • From: Andy Shevchenko
• [PATCH v2 1/2] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH] mxs-auart: count FIFO overrun errors
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Andy Shevchenko
• [PATCH] mxs-auart: count FIFO overrun errors
  • From: Wolfgang Ocker
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Andy Shevchenko
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Johannes Berg
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Tony Lindgren
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Andy Shevchenko
• [PATCH] serial: sunhv: Free memory when remove() is called
  • From: Souptick Joarder
• [PATCH] serial: sunsu: Free memory when probe fails
  • From: Souptick Joarder
• Re: [PATCH] Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  • From: Greg Kroah-Hartman
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: liviu.dudau@xxxxxxx
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: One Thousand Gnomes
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: One Thousand Gnomes
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Sebastian Andrzej Siewior
• [PATCH v3 1/2] serial: 8250_port: export serial8250_rpm_{get|put}_tx()
  • From: Andy Shevchenko
• [PATCH v3 0/2] serial: 8250_dma: power off when DMA completed
  • From: Andy Shevchenko
• [PATCH v3 2/2] serial: 8250_dma: power off device after TX is done
  • From: Andy Shevchenko
• Re: [PATCH v1 2/2] serial: 8250_dma: power off device after TX is done
  • From: Andy Shevchenko
• [PATCH v2 0/2] serial: 8250_dma: power off when DMA completed
  • From: Andy Shevchenko
• [PATCH v2 1/2] serial: 8250_port: export serial8250_rpm_{get|put}_tx()
  • From: Andy Shevchenko
• [PATCH v2 2/2] serial: 8250_dma: power off device after TX is done
  • From: Andy Shevchenko
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• [PATCH] Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  • From: Huacai Chen
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: liviu.dudau@xxxxxxx
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: liviu.dudau@xxxxxxx
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: liviu.dudau@xxxxxxx
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: liviu.dudau@xxxxxxx
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• Re: [PATCH] serial: sirf: Simplify a test
  • From: Julia Lawall
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Benjamin Herrenschmidt
• [PATCH v4 2/3] serial: 8250: Expose set_ldisc function
  • From: Ed Blake
• [PATCH v4 3/3] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• [PATCH v4 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Ed Blake
• [PATCH v4 0/3] serial: Add IrDA support to 8250_dw driver
  • From: Ed Blake
• Re: [PATCH v3 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Greg KH
• Re: [PATCH v3 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Ed Blake
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• RE: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Gabriele Paoloni
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH v3 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Greg KH
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Andy Shevchenko
• Re: [PATCH v1 2/2] serial: 8250_dma: power off device after TX is done
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 3/3] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Greg KH
• Re: [PATCH v3 2/3] serial: 8250: Expose set_ldisc function
  • From: Greg KH
• Re: [PATCH v3 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Greg KH
• Re: [PATCH] serial: Free memory when probe fails
  • From: Greg KH
• Re: [PATCH v2] serial: Free memory when kzalloc fails during probe
  • From: Greg KH
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• Re: [PATCH] serial: pl011: add console matching function
  • From: Greg Kroah-Hartman
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Mark Rutland
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Benjamin Herrenschmidt
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: zhichang.yuan
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Luis R. Rodriguez
• Re: [PATCH] ACPI / platform: Add support for build-in properties
  • From: Rafael J. Wysocki
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Arnd Bergmann
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• Re: [PATCH] serial: 8250_pxa: hide early console setup when disabled
  • From: Robert Jarzmik
• Re: [PATCH] serial: pl011: add console matching function
  • From: Timur Tabi
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: liviu.dudau@xxxxxxx
• RE: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Gabriele Paoloni
• RE: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Gabriele Paoloni
• Re: [PATCH] serial: Free memory when probe fails
  • From: Souptick Joarder
• Re: [PATCH v2] serial: Free memory when kzalloc fails during probe
  • From: Souptick Joarder
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: One Thousand Gnomes
• [PATCH] serial: 8250_pxa: hide early console setup when disabled
  • From: Arnd Bergmann
• RE: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Gabriele Paoloni
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: liviu . dudau
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: John Garry
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Mark Rutland
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Daniel Wagner
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Benjamin Herrenschmidt
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Benjamin Herrenschmidt
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Luis R. Rodriguez
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• Re: [PATCH 2/2] serial: pxa2xx: mark PM functions as __maybe_unused
  • From: Robert Jarzmik
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Mark Rutland
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: John Garry
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Will Deacon
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: John Garry
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Arnd Bergmann
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Arnd Bergmann
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Will Deacon
• [PATCH 1/2] serial: pxa2xx: remove __deprecated annotation
  • From: Arnd Bergmann
• [PATCH 2/2] serial: pxa2xx: mark PM functions as __maybe_unused
  • From: Arnd Bergmann
• Re: [PATCH 3/3] serial: crisv10: fix invalid user-pointer check
  • From: Jesper Nilsson
• [PATCH 3/3] serial: crisv10: fix invalid user-pointer check
  • From: Johan Hovold
• [PATCH 0/3] tty/serial: fix invalid user-pointer checks
  • From: Johan Hovold
• [PATCH 2/3] tty: rocket: fix invalid user-pointer checks
  • From: Johan Hovold
• [PATCH 1/3] tty: amiserial: fix invalid user-pointer check
  • From: Johan Hovold
• Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: Mark Rutland
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Mark Rutland
• Re: [PATCH] serial: sirf: Simplify a test
  • From: Arnd Bergmann
• Re: [PATCH] serial: sirf: Simplify a test
  • From: Christophe JAILLET
• Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: kbuild test robot
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: kbuild test robot
• Re: [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: kbuild test robot
• [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• [PATCH V5 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: zhichang.yuan
• [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• [PATCH V5 0/3] ARM64 LPC: legacy ISA I/O support
  • From: zhichang.yuan
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Tony Lindgren
• Re: [PATCH] serial: sirf: Simplify a test
  • From: Julia Lawall
• [PATCH] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Simon Horman
• Re: [PATCH/RFC] serial: sh-sci: Fix unlocked access to SCSCR register
  • From: Wolfram Sang
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Simon Horman
• [PATCH/RFC] serial: sh-sci: Fix unlocked access to SCSCR register
  • From: Simon Horman
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] arm64: dts: r8a7796-salvator-x: Disable sdr104 of SDHI
  • From: Simon Horman
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Simon Horman
• [PATCH] 8250: FIX Fourth port offset of Pericom PI7C9X7954 boards
  • From: Angelo Butti
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Simon Horman
• [PATCH/RFC] arm64: dts: r8a7796-salvator-x: Disable sdr104 of SDHI
  • From: Simon Horman
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Wolfram Sang
• Re: [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Geert Uytterhoeven
• [PATCH/RFC] serial: sh-sci: Fix deadlock caused by serial output request
  • From: Simon Horman
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Andy Shevchenko
• Re: [PATCH] serial: sirf: Simplify a test
  • From: Arnd Bergmann
• Re: [PATCH] ACPI / platform: Add support for build-in properties
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: make crisv10 explicitly non-modular
  • From: Jesper Nilsson
• Re: [PATCH/RESEND V4 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Mark Rutland
• [PATCH 2/2] tty: serial: Make the STM32 serial port depend on it's arch
  • From: Peter Robinson
• Re: [PATCH] ACPI / platform: Add support for build-in properties
  • From: Jérôme de Bretagne
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Maciej W. Rozycki
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Peter Hurley
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCH] serial: Free memory when probe fails
  • From: Souptick Joarder
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Peter Hurley
• Re: [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Sebastian Andrzej Siewior
• [PATCH v1 1/1] serial: core: enforce type for upf_t when copying
  • From: Andy Shevchenko
• Re: [PATCH] ACPI / platform: Add support for build-in properties
  • From: Yazen Ghannam
• [PATCH v1 1/1] serial: core: make static analyzer happy about locks
  • From: Andy Shevchenko
• [PATCH v1 1/2] serial: 8250_port: export serial8250_rpm_{get|put}_tx()
  • From: Andy Shevchenko
• [PATCH v1 2/2] serial: 8250_dma: power off device after TX is done
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: 8250_port: properly handle runtime PM in IRQ
  • From: Andy Shevchenko
• [PATCH] ACPI / platform: Add support for build-in properties
  • From: Heikki Krogerus
• [PATCH v2] serial: Free memory when kzalloc fails during probe
  • From: Souptick Joarder
• [PATCH] serial: Free memory when kzalloc fails during probe
  • From: Souptick Joarder
• RE: [PATCH/RESEND V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Gabriele Paoloni
• Re: [PATCHv2 3/3] serial: 8250_dw: Add quirk for APM X-Gene SoC (was: BT / serial regression introduced during the recent 4.9-rc1 merge?)
  • From: Heikki Krogerus
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCHv2 3/3] serial: 8250_dw: Add quirk for APM X-Gene SoC (was: BT / serial regression introduced during the recent 4.9-rc1 merge?)
  • From: Jérôme de Bretagne
• Re: [PATCHv2 3/3] serial: 8250_dw: Add quirk for APM X-Gene SoC (was: BT / serial regression introduced during the recent 4.9-rc1 merge?)
  • From: Heikki Krogerus
• Re: [PATCHv2 3/3] serial: 8250_dw: Add quirk for APM X-Gene SoC (was: BT / serial regression introduced during the recent 4.9-rc1 merge?)
  • From: Rafael J. Wysocki
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Rob Herring
• Re: [PATCH/RESEND V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Bjorn Helgaas
• Re: [PATCHv2 3/3] serial: 8250_dw: Add quirk for APM X-Gene SoC (was: BT / serial regression introduced during the recent 4.9-rc1 merge?)
  • From: Jérôme de Bretagne
• Re: [PATCH/RESEND V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: kbuild test robot
• Re: [PATCH/RESEND V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: kbuild test robot
• [PATCH/RESEND V4 0/3] ARM64 LPC: legacy ISA I/O support
  • From: zhichang.yuan
• [PATCH/RESEND V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: zhichang.yuan
• [PATCH/RESEND V4 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• [PATCH/RESEND V4 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• [PATCH] serial: sirf: Simplify a test
  • From: Christophe JAILLET
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Rob Herring
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Peter Hurley
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Peter Hurley
• [PATCH] tty: serial: make crisv10 explicitly non-modular
  • From: Paul Gortmaker
• [PATCH v3 3/3] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• [PATCH v3 1/3] serial: 8250: Add IrDA to UART capabilities
  • From: Ed Blake
• [PATCH v3 2/3] serial: 8250: Expose set_ldisc function
  • From: Ed Blake
• [PATCH v3 0/3] serial: Add IrDA support to 8250_dw driver
  • From: Ed Blake
• Re: [PATCH v2 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• [tty:tty-testing 16/24] drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool
  • From: kbuild test robot
• Re: [PATCH v2] sh-sci: document R8A7743/5 support
  • From: Rob Herring
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• [GIT PULL] TTY/Serial driver fixes for 4.9-rc3
  • From: Greg KH
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCH v2 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Andy Shevchenko
• Re: [PATCH v2 0/2] serial: Add IrDA support to 8250_dw driver
  • From: Matwey V. Kornilov
• [PATCH v2 1/2] serial: 8250: Expose set_ldisc function
  • From: Ed Blake
• [PATCH v2 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• [PATCH v2 0/2] serial: Add IrDA support to 8250_dw driver
  • From: Ed Blake
• Re: [PATCH 0/2] uart_close related fixes
  • From: Greg Kroah-Hartman
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Greg Kroah-Hartman
• [PATCH 1/2] tty: serial_core: Fix serial console crash on port shutdown
  • From: Rob Herring
• [PATCH 2/2] tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup
  • From: Rob Herring
• [PATCH 0/2] uart_close related fixes
  • From: Rob Herring
• [PATCH] serial: Free memory when probe fails
  • From: Souptick Joarder
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Andy Shevchenko
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Uwe Kleine-König
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Cyrille Pitchen
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Heikki Krogerus
• Re: [tty:tty-testing 3/22] drivers/tty/serial/fsl_lpuart.c:476:15: warning: unused variable 'status'
  • From: Greg Kroah-Hartman
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Alexandre Belloni
• [tty:tty-testing 3/22] drivers/tty/serial/fsl_lpuart.c:476:15: warning: unused variable 'status'
  • From: kbuild test robot
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Uwe Kleine-König
• Re: [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• Re: [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Andy Shevchenko
• [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode
  • From: Ed Blake
• [PATCH 1/2] serial: 8250: Expose set_ldisc function
  • From: Ed Blake
• Re: [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Nicolas Ferre
• [PATCH v6] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH v1 2/3] serial: 8250: allow user to skip using of DMA channels
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 3/3] serial: 8250_port: configure using of DMA channels runtime
  • From: Greg Kroah-Hartman
• Re: [PATCH v1 1/3] serial: 8250: move UPF_NO_TXEN_TEST to quirks and rename
  • From: Greg Kroah-Hartman
• Re: [PATCH V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: zhichang.yuan
• Re: [PATCH V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: Rob Herring
• Re: [PATCH V4 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: Rob Herring
• Re: [PATCH v6 RESEND] serial: rewrite pxa2xx-uart to use 8250_core
  • From: Robert Jarzmik
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Alexandre Belloni
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Alexandre Belloni
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Sebastian Reichel
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Rob Herring
• Re: [RFC PATCH 0/6] UART slave devices using serio
  • From: Sebastian Reichel
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Uwe Kleine-König
• Re: [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Alexandre Belloni
• [PATCH] tty/serial: at91: fix hardware handshake on Atmel platforms
  • From: Richard Genoud
• Re: [PATCH] serial: core: fix console problems on uart_close
  • From: Mike Galbraith
• Re: [PATCH] serial: core: fix console problems on uart_close
  • From: Rob Herring
• Re: [PATCH] serial: core: fix console problems on uart_close
  • From: Mike Galbraith
• [PATCH] sc16is7xx: always write state when configuring GPIO as an output
  • From: Francois Berder
• Re: [PATCH] serial: core: fix console problems on uart_close
  • From: Geert Uytterhoeven
• Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
  • From: Mike Galbraith
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• [PATCH] serial: core: fix console problems on uart_close
  • From: Rob Herring
• Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
  • From: Borislav Petkov
• Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
  • From: Jiri Slaby
• Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
  • From: Mike Galbraith
• BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
  • From: Borislav Petkov
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage
  • From: Andy Shevchenko
• [PATCH 2/4] serial: 8250_uniphier: fix clearing divisor latch access bit
  • From: Masahiro Yamada
• [PATCH 4/4] serial: 8250_uniphier: avoid locking for FCR register write
  • From: Masahiro Yamada
• [PATCH 1/4] serial: 8250_uniphier: fix more unterminated string
  • From: Masahiro Yamada
• [PATCH 0/4] serial: 8250_uniphier: some fixes and optimization
  • From: Masahiro Yamada
• [PATCH 3/4] serial: 8250_uniphier: hardcode regshift to avoid unneeded memory read
  • From: Masahiro Yamada
• Re: [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage
  • From: Fengguang Wu
• Re: [PATCH -next] tty: serial: 8250: add terminate entry for pci_device_id tables
  • From: Wei Yongjun
• Re: [PATCH -next] serial: pch_uart: add terminate entry for dmi_system_id tables
  • From: Jiri Slaby
• Re: [PATCH -next] tty: serial: 8250: add terminate entry for pci_device_id tables
  • From: Jiri Slaby
• [PATCH -next] tty: serial: 8250: add terminate entry for pci_device_id tables
  • From: Wei Yongjun
• [PATCH -next] serial: pch_uart: add terminate entry for dmi_system_id tables
  • From: Wei Yongjun
• Re: [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage
  • From: Andy Shevchenko
• Re: [PATCH 1/2] serial: mctrl_gpio: restrict MCTRL initialization
  • From: Andy Shevchenko
• [PATCH] serial: 8250: pxa: add devicetree earlyconsole
  • From: Robert Jarzmik
• [PATCH v2] sh-sci: document R8A7743/5 support
  • From: Sergei Shtylyov
• [PATCH v1 1/1] serial: 8250_lpss: get IRQ via pci_irq_vector()
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_lpss: enable MSI for sure
  • From: Andy Shevchenko
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• 8250_omap: rs485 ioctl inconsistent.
  • From: Rafael Gago Castano
• Re: [PATCH 1/2] serial: mctrl_gpio: restrict MCTRL initialization
  • From: Yegor Yefremov
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [PATCH 2/2] tty/serial/8250: use mctrl_gpio helpers
  • From: Andy Shevchenko
• Re: [PATCH 2/2] tty/serial/8250: use mctrl_gpio helpers
  • From: Yegor Yefremov
• Re: [PATCH 2/2] tty/serial/8250: use mctrl_gpio helpers
  • From: Andy Shevchenko
• Re: [PATCH 1/2] serial: mctrl_gpio: restrict MCTRL initialization
  • From: Andy Shevchenko
• [PATCH 2/2] tty/serial/8250: use mctrl_gpio helpers
  • From: yegorslists
• [PATCH 1/2] serial: mctrl_gpio: restrict MCTRL initialization
  • From: yegorslists
• [PATCH 0/2] tty: serial: 8250 introduce mctrl_gpio helpers
  • From: yegorslists
• [PATCH V4 1/3] ARM64 LPC: Indirect ISA port IO introduced
  • From: zhichang.yuan
• [PATCH V4 0/3] ARM64 LPC: legacy ISA I/O support
  • From: zhichang.yuan
• [PATCH V4 3/3] ARM64 LPC: LPC driver implementation on Hip06
  • From: zhichang.yuan
• [PATCH V4 2/3] ARM64 LPC: Add missing range exception for special ISA
  • From: zhichang.yuan
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• Re: Implement UART RPM in serial_core.c
  • From: Andy Shevchenko
• Re: drivers/tty/serial/max310x doesn't support latest UART revision of MAX14830
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: Runtime PM support in serial core?
  • From: Andy Shevchenko
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: drivers/tty/serial/max310x doesn't support latest UART revision of MAX14830
  • From: Uwe Kleine-König
• Re: [PATCH v2] tty: serial_core: Fix serial console crash on port shutdown
  • From: Niklas Söderlund
• Re: drivers/tty/serial/max310x doesn't support latest UART revision of MAX14830
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• Re: [v2] tty: serial_core: Fix serial console crash on port shutdown
  • From: Mugunthan V N
• Re: seeing some junk characters on boot console with v4.9-rc1-3-g14155ca
  • From: Rob Herring
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Sean Young
• Re: [Linux-kernel] [PATCH] tty: serial: 8250: add CON_CONSDEV to flags
  • From: Jiri Slaby
• Re: console issue since 3.6, console=ttyS1 hangs
  • From: Nathan Zimmer
• [PATCH v2] tty: serial_core: Fix serial console crash on port shutdown
  • From: Geert Uytterhoeven
• Re: [Linux-kernel] [PATCH] tty: serial: 8250: add CON_CONSDEV to flags
  • From: Ben Dooks
• Re: [PATCH] tty: serial: 8250: add CON_CONSDEV to flags
  • From: Jiri Slaby
• Re: [PATCH v6 2/2] devicetree: bindings: uart: Add new compatible string for ZynqMP
  • From: Rob Herring
• seeing some junk characters on boot console with v4.9-rc1-3-g14155ca
  • From: Mugunthan V N
• [PATCH] tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
  • From: David Singleton
• Re: Runtime PM support in serial core?
  • From: Tony Lindgren
• Re: Runtime PM support in serial core?
  • From: Andy Shevchenko
• Re: Runtime PM support in serial core?
  • From: Tony Lindgren
• Implement UART RPM in serial_core.c
  • From: Andy Shevchenko
• Re: Runtime PM support in serial core?
  • From: Andy Shevchenko
• [PATCH v2] sc16is7xx: Drop bogus use of IRQF_ONESHOT
  • From: Julia Cartwright
• Re: [PATCH] sc16is7xx: Drop bogus use of IRQF_ONESHOT
  • From: Jakub Kicinski
• Re: [patch] serial: stm32: fix a type issue
  • From: Dan Carpenter
• [PATCH v6 2/2] devicetree: bindings: uart: Add new compatible string for ZynqMP
  • From: Nava kishore Manne
• Re: [patch] serial: stm32: fix a type issue
  • From: Russell King - ARM Linux
• [PATCH v6 1/2] serial: xuartps: Add new compatible string for ZynqMP
  • From: Nava kishore Manne
• Re: [patch] serial: stm32: fix a type issue
  • From: Gerald Baeza
• [patch] serial: stm32: fix a type issue
  • From: Dan Carpenter
• Re: Section mismatches in early_printk support functions
  • From: Mason
• Re: Section mismatches in early_printk support functions
  • From: Greg Kroah-Hartman
• Section mismatches in early_printk support functions
  • From: Mason
• Re: [PATCH v1 1/1] serial: 8250_lpss: enable MSI for sure
  • From: deckard
• Re: [PATCH] tty: serial: fsl_lpuart: Fix Tx DMA edge case
  • From: Bhuvanchandra DV
• [PATCH v1 1/3] serial: 8250: move UPF_NO_TXEN_TEST to quirks and rename
  • From: Andy Shevchenko
• [PATCH v1 3/3] serial: 8250_port: configure using of DMA channels runtime
  • From: Andy Shevchenko
• [PATCH v1 0/3] serial: 8250: add a possibility to enforce PIO
  • From: Andy Shevchenko
• [PATCH v1 2/3] serial: 8250: allow user to skip using of DMA channels
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250: attempt to keep Kconfig and Makefile in order
  • From: Andy Shevchenko
• [PATCH v1 2/2] serial: 8250_lpss: Try to enable Memory-Write-Invalidate
  • From: Andy Shevchenko
• [PATCH v1 1/2] serial: 8250_lpss: set PCI master only for private DMA
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: 8250_lpss: enable MSI for sure
  • From: Andy Shevchenko
• Re: Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Maciej W. Rozycki
• Re: Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Oliver Mangold
• Re: Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Greg KH
• Re: Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Oliver Mangold
• Re: Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Greg KH
• Enumeration of ISA serial ports inconsistent between Linux and GRUB2
  • From: Oliver Mangold
• Re: [PATCH] tty: serial: fsl_lpuart: Fix Tx DMA edge case
  • From: Stefan Agner
• Re: [PATCHv4 2/3] tty/serial: at91: fix hardware handshake with GPIOs
  • From: Richard Genoud
• [PATCH] tty: serial: fsl_lpuart: Fix Tx DMA edge case
  • From: Aaron Brice
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Geert Uytterhoeven
• Re: [PATCH -next] serial: stm32: fix build failure
  • From: Alexandre Torgue
• Re: [PATCH] serial: SERIAL_STM32 should depend on HAS_DMA
  • From: Alexandre Torgue
• [PATCH] serial: SERIAL_STM32 should depend on HAS_DMA
  • From: Geert Uytterhoeven
• [PATCH] serial: stm32: Fix comparisons with undefined register
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/4] ARM64 LPC: LPC driver implementation on Hip06
  • From: John Garry
• [PATCH -next] serial: stm32: fix build failure
  • From: Alexandre TORGUE
• Re: [PATCH 02/11] DOCUMENTATION: dt-bindings: Document the STM32 USART bindings
  • From: Alexandre Torgue
• Re: [PATCH v6 RESEND] serial: rewrite pxa2xx-uart to use 8250_core
  • From: Greg Kroah-Hartman
• Re: [PATCH v6 RESEND] serial: rewrite pxa2xx-uart to use 8250_core
  • From: Robert Jarzmik
• Re: [PATCH V3 2/4] ARM64 LPC: LPC driver implementation on Hip06
  • From: Benjamin Herrenschmidt
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Luis R. Rodriguez
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Linus Torvalds
• Re: [RFC] fs: add userspace critical mounts event support
  • From: Luis R. Rodriguez
• Re: [PATCH 02/11] DOCUMENTATION: dt-bindings: Document the STM32 USART bindings
  • From: Rob Herring
• Re: [PATCH 02/11] DOCUMENTATION: dt-bindings: Document the STM32 USART bindings
  • From: Gerald Baeza
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Laurent Pinchart
• RE: [PATCH] sh-sci: add R8A7743/5 support
  • From: Chris Brandt
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Laurent Pinchart
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Laurent Pinchart
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Rob Herring
• Re: [PATCH v5] devicetree: bindings: uart: Add new compatible string for ZynqMP
  • From: Rob Herring
• RE: [PATCH v5] devicetree: bindings: uart: Add new compatible string for ZynqMP
  • From: Nava kishore Manne
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Geert Uytterhoeven
• Re: [PATCH] sh-sci: add R8A7743/5 support
  • From: Laurent Pinchart
• Re: [PATCH/RFC] tty: serial_core: Move uart_console() check after console registration
  • From: Geert Uytterhoeven
• [PATCH 2/2] tty: serial: Makefile: move kgdb to be initialized last
  • From: Nicolae Rosia
• [PATCH 1/2] tty: serial: fsl_lpuart: add polled console functions
  • From: Nicolae Rosia
• [PATCH 0/2] tty: serial: kgdb support for fsl_lpuart
  • From: Nicolae Rosia
• Re: [PATCH V3 2/4] ARM64 LPC: LPC driver implementation on Hip06
  • From: John Garry
• [PATCH V2 2/6] serial: 8250_fintek: Set IRQ Mode when port probed
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 3/6] serial: 8250_fintek: Set maximum FIFO of F81216H
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 1/6] serial: 8250_fintek: Refactoring read/write method
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 4/6] serial: 8250_fintek: Add F81216 Support
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 6/6] serial: 8250_fintek: Add F81865 Support
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 5/6] serial: 8250_fintek: Add F81866 Support
  • From: Ji-Ze Hong (Peter Hong)
• [PATCH V2 0/6] serial: 8250_fintek: Fix the IRQ mode and code refactoring
  • From: Ji-Ze Hong (Peter Hong)
• Re: [PATCHv4 1/3] serial: mctrl_gpio: implement mctrl_gpio_use_rtscts
  • From: Uwe Kleine-König
• Re: [PATCHv4 2/3] tty/serial: at91: fix hardware handshake with GPIOs
  • From: Uwe Kleine-König
• [PATCH] serial: pl011: add console matching function
  • From: Aleksey Makarov
• Re: [PATCHv2 4/4] nios2: dts: 10m50: Add tx-threshold parameter
  • From: Ley Foon Tan
• RE: [PATCH] serial: samsung: add clock controls in s3c24xx_serial_resume_noirq()
  • From: 남영민
• Re: [PATCH/RFC] tty: serial_core: Move uart_console() check after console registration
  • From: Rob Herring
• Re: [PATCH/RFC] tty: serial_core: Move uart_console() check after console registration
  • From: Geert Uytterhoeven
• Re: [PATCH v5] devicetree: bindings: uart: Add new compatible string for ZynqMP
  • From: Rob Herring
• Re: [PATCH/RFC] tty: serial_core: Move uart_console() check after console registration
  • From: Rob Herring
• [PATCH] sc16is7xx: Drop bogus use of IRQF_ONESHOT
  • From: Julia Cartwright
• [GIT PULL] TTY/Serial driver patches for 4.9-rc1
  • From: Greg KH
• [PATCH 1/7] tty: vt, cleanup and document con_scroll
  • From: Jiri Slaby
• [PATCH 3/7] tty: vgacon+sisusb, move scrolldelta to a common helper
  • From: Jiri Slaby
• [PATCH 7/7] vgacon: remove prehistoric macros
  • From: Jiri Slaby
• [PATCH 4/7] tty: vt, compute vc offsets in advance
  • From: Jiri Slaby
• [PATCH 5/7] tty: vt, rename variables to sane names
  • From: Jiri Slaby