The following patches will fix the Fintek LPC to UARTs IRQ mode mismatch
issue and code refactoring.
Some BIOS only use _OSI("Linux") to distinguish between Linux & Windows.
Apply Level/Low to UART trigger mode if Windows, Edge/High otherwise.
But since 2.6.23 the mainline kernel no longer returns true for
_OSI("Linux"). The BIOS ASL should avoid to use _OSI() to check system
type and use ACPI MADT override IRQ mode instead.
We'll try to refactoring the source code more readable with SuperIO
read/write register functions.
Changelog:
V2
1. Code refacting. Suggest by Ricardo Ribalda Delgado.
Ji-Ze Hong (Peter Hong) (6):
serial: 8250_fintek: Refactoring read/write method
serial: 8250_fintek: Set IRQ Mode when port probed
serial: 8250_fintek: Set maximum FIFO of F81216H
serial: 8250_fintek: Add F81216 Support
serial: 8250_fintek: Add F81866 Support
serial: 8250_fintek: Add F81865 Support
drivers/tty/serial/8250/8250_fintek.c | 231 +++++++++++++++++++++++++---------
1 file changed, 173 insertions(+), 58 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
