If we need to access SuperIO registers, It should write register offset
to base_addr and read/write value to base_addr + 1 to perform read/write.
We can make it more simply with write/read functions.
This patch add sio_read_reg()/sio_write_reg()/sio_write_mask_reg() to
reduce SuperIO register operation with lot of outb()/inb().
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx>
---
drivers/tty/serial/8250/8250_fintek.c | 73 ++++++++++++++++++-----------------
1 file changed, 38 insertions(+), 35 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 0facc78..2ae846e 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -49,6 +49,27 @@ struct fintek_8250 {
u8 key;
};
+static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg)
+{
+ outb(reg, pdata->base_port + ADDR_PORT);
+ return inb(pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_reg(struct fintek_8250 *pdata, u8 reg, u8 data)
+{
+ outb(reg, pdata->base_port + ADDR_PORT);
+ outb(data, pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_mask_reg(struct fintek_8250 *pdata, u8 reg, u8 mask,
+ u8 data)
+{
+ u8 tmp;
+
+ tmp = (sio_read_reg(pdata, reg) & ~mask) | (mask & data);
+ sio_write_reg(pdata, reg, tmp);
+}
+
static int fintek_8250_enter_key(u16 base_port, u8 key)
{
if (!request_muxed_region(base_port, 2, "8250_fintek"))
@@ -66,22 +87,18 @@ static void fintek_8250_exit_key(u16 base_port)
release_region(base_port + ADDR_PORT, 2);
}
-static int fintek_8250_check_id(u16 base_port)
+static int fintek_8250_check_id(struct fintek_8250 *pdata)
{
u16 chip;
- outb(VENDOR_ID1, base_port + ADDR_PORT);
- if (inb(base_port + DATA_PORT) != VENDOR_ID1_VAL)
+ if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL)
return -ENODEV;
- outb(VENDOR_ID2, base_port + ADDR_PORT);
- if (inb(base_port + DATA_PORT) != VENDOR_ID2_VAL)
+ if (sio_read_reg(pdata, VENDOR_ID2) != VENDOR_ID2_VAL)
return -ENODEV;
- outb(CHIP_ID1, base_port + ADDR_PORT);
- chip = inb(base_port + DATA_PORT);
- outb(CHIP_ID2, base_port + ADDR_PORT);
- chip |= inb(base_port + DATA_PORT) << 8;
+ chip = sio_read_reg(pdata, CHIP_ID1);
+ chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
if (chip != CHIP_ID_0 && chip != CHIP_ID_1)
return -ENODEV;
@@ -128,10 +145,8 @@ static int fintek_8250_rs485_config(struct uart_port *port,
if (fintek_8250_enter_key(pdata->base_port, pdata->key))
return -EBUSY;
- outb(LDN, pdata->base_port + ADDR_PORT);
- outb(pdata->index, pdata->base_port + DATA_PORT);
- outb(RS485, pdata->base_port + ADDR_PORT);
- outb(config, pdata->base_port + DATA_PORT);
+ sio_write_reg(pdata, LDN, pdata->index);
+ sio_write_reg(pdata, RS485, config);
fintek_8250_exit_key(pdata->base_port);
port->rs485 = *rs485;
@@ -147,10 +162,12 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
for (i = 0; i < ARRAY_SIZE(addr); i++) {
for (j = 0; j < ARRAY_SIZE(keys); j++) {
+ pdata->base_port = addr[i];
+ pdata->key = keys[j];
if (fintek_8250_enter_key(addr[i], keys[j]))
continue;
- if (fintek_8250_check_id(addr[i])) {
+ if (fintek_8250_check_id(pdata)) {
fintek_8250_exit_key(addr[i]);
continue;
}
@@ -158,19 +175,13 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
for (k = 0; k < 4; k++) {
u16 aux;
- outb(LDN, addr[i] + ADDR_PORT);
- outb(k, addr[i] + DATA_PORT);
-
- outb(IO_ADDR1, addr[i] + ADDR_PORT);
- aux = inb(addr[i] + DATA_PORT);
- outb(IO_ADDR2, addr[i] + ADDR_PORT);
- aux |= inb(addr[i] + DATA_PORT) << 8;
+ sio_write_reg(pdata, LDN, k);
+ aux = sio_read_reg(pdata, IO_ADDR1);
+ aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
if (aux != io_address)
continue;
fintek_8250_exit_key(addr[i]);
- pdata->key = keys[j];
- pdata->base_port = addr[i];
pdata->index = k;
return 0;
@@ -186,24 +197,16 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
{
int status;
- u8 tmp;
status = fintek_8250_enter_key(pdata->base_port, pdata->key);
if (status)
return status;
- outb(LDN, pdata->base_port + ADDR_PORT);
- outb(pdata->index, pdata->base_port + DATA_PORT);
-
- outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
- tmp = inb(pdata->base_port + DATA_PORT);
-
- tmp &= ~IRQ_MODE_MASK;
- tmp |= IRQ_SHARE;
- if (!level_mode)
- tmp |= IRQ_EDGE_HIGH;
+ sio_write_reg(pdata, LDN, pdata->index);
+ sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, IRQ_SHARE);
+ sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
+ level_mode ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
- outb(tmp, pdata->base_port + DATA_PORT);
fintek_8250_exit_key(pdata->base_port);
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
