[PATCH v1 1/2] serial: 8250_port: export serial8250_rpm_{get|put}_tx()

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

The following fix of runtime PM use in DMA mode requires at least
serial8250_rpm_put_tx() to be available. Export both calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250.h      | 5 +++++
 drivers/tty/serial/8250/8250_port.c | 6 ++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 9ffa8d1..7ae17e8 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -131,8 +131,13 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
 }
 
 struct uart_8250_port *serial8250_get_port(int line);
+
 void serial8250_rpm_get(struct uart_8250_port *p);
 void serial8250_rpm_put(struct uart_8250_port *p);
+
+void serial8250_rpm_get_tx(struct uart_8250_port *p);
+void serial8250_rpm_put_tx(struct uart_8250_port *p);
+
 int serial8250_em485_init(struct uart_8250_port *p);
 void serial8250_em485_destroy(struct uart_8250_port *p);
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 0c94e82..fe3a7c5 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -636,7 +636,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
  * once and disable_runtime_pm_tx() will still disable RPM because the fifo is
  * empty and the HW can idle again.
  */
-static void serial8250_rpm_get_tx(struct uart_8250_port *p)
+void serial8250_rpm_get_tx(struct uart_8250_port *p)
 {
 	unsigned char rpm_active;
 
@@ -648,8 +648,9 @@ static void serial8250_rpm_get_tx(struct uart_8250_port *p)
 		return;
 	pm_runtime_get_sync(p->port.dev);
 }
+EXPORT_SYMBOL_GPL(serial8250_rpm_get_tx);
 
-static void serial8250_rpm_put_tx(struct uart_8250_port *p)
+void serial8250_rpm_put_tx(struct uart_8250_port *p)
 {
 	unsigned char rpm_active;
 
@@ -662,6 +663,7 @@ static void serial8250_rpm_put_tx(struct uart_8250_port *p)
 	pm_runtime_mark_last_busy(p->port.dev);
 	pm_runtime_put_autosuspend(p->port.dev);
 }
+EXPORT_SYMBOL_GPL(serial8250_rpm_put_tx);
 
 /*
  * IER sleep support.  UARTs which have EFRs need the "extended
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html