Re: [PATCH V5 1/3] ARM64 LPC: Indirect ISA port IO introduced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/11/2016 16:12, Will Deacon wrote:
On Tue, Nov 08, 2016 at 11:47:07AM +0800, zhichang.yuan wrote:
For arm64, there is no I/O space as other architectural platforms, such as
X86. Most I/O accesses are achieved based on MMIO. But for some arm64 SoCs,
such as Hip06, when accessing some legacy ISA devices connected to LPC, those
known port addresses are used to control the corresponding target devices, for
example, 0x2f8 is for UART, 0xe4 is for ipmi-bt. It is different from the
normal MMIO mode in using.

To drive these devices, this patch introduces a method named indirect-IO.
In this method the in/out pair in arch/arm64/include/asm/io.h will be
redefined. When upper layer drivers call in/out with those known legacy port
addresses to access the peripherals, the hooking functions corrresponding to
those target peripherals will be called. Through this way, those upper layer
drivers which depend on in/out can run on Hip06 without any changes.

Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Signed-off-by: zhichang.yuan <yuanzhichang@xxxxxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
---
 arch/arm64/Kconfig             |  6 +++
 arch/arm64/include/asm/extio.h | 94 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm64/include/asm/io.h    | 29 +++++++++++++
 arch/arm64/kernel/Makefile     |  1 +
 arch/arm64/kernel/extio.c      | 27 ++++++++++++
 5 files changed, 157 insertions(+)
 create mode 100644 arch/arm64/include/asm/extio.h
 create mode 100644 arch/arm64/kernel/extio.c

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 969ef88..b44070b 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -163,6 +163,12 @@ config ARCH_MMAP_RND_COMPAT_BITS_MIN
 config ARCH_MMAP_RND_COMPAT_BITS_MAX
        default 16

+config ARM64_INDIRECT_PIO
+	bool "access peripherals with legacy I/O port"
+	help
+	  Support special accessors for ISA I/O devices. This is needed for
+	  SoCs that do not support standard read/write for the ISA range.
+
 config NO_IOPORT_MAP
 	def_bool y if !PCI

diff --git a/arch/arm64/include/asm/extio.h b/arch/arm64/include/asm/extio.h
new file mode 100644
index 0000000..6ae0787
--- /dev/null
+++ b/arch/arm64/include/asm/extio.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2016 Hisilicon Limited, All Rights Reserved.
+ * Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_EXTIO_H
+#define __LINUX_EXTIO_H
+
+struct extio_ops {
+	unsigned long start;/* inclusive, sys io addr */
+	unsigned long end;/* inclusive, sys io addr */
+
+	u64 (*pfin)(void *devobj, unsigned long ptaddr,	size_t dlen);
+	void (*pfout)(void *devobj, unsigned long ptaddr, u32 outval,
+					size_t dlen);
+	u64 (*pfins)(void *devobj, unsigned long ptaddr, void *inbuf,
+				size_t dlen, unsigned int count);
+	void (*pfouts)(void *devobj, unsigned long ptaddr,
+				const void *outbuf, size_t dlen,
+				unsigned int count);
+	void *devpara;
+};
+
+extern struct extio_ops *arm64_extio_ops;
+
+#define DECLARE_EXTIO(bw, type)						\
+extern type in##bw(unsigned long addr);					\
+extern void out##bw(type value, unsigned long addr);			\
+extern void ins##bw(unsigned long addr, void *buffer, unsigned int count);\
+extern void outs##bw(unsigned long addr, const void *buffer, unsigned int count);
+
+#define BUILD_EXTIO(bw, type)						\
+type in##bw(unsigned long addr)						\
+{									\
+	if (!arm64_extio_ops || arm64_extio_ops->start > addr ||	\
+			arm64_extio_ops->end < addr)			\
+		return read##bw(PCI_IOBASE + addr);			\
+	return arm64_extio_ops->pfin ?					\
+		arm64_extio_ops->pfin(arm64_extio_ops->devpara,		\
+			addr, sizeof(type)) : -1;			\
+}									\
+									\
+void out##bw(type value, unsigned long addr)				\
+{									\
+	if (!arm64_extio_ops || arm64_extio_ops->start > addr ||	\
+			arm64_extio_ops->end < addr)			\
+		write##bw(value, PCI_IOBASE + addr);			\
+	else								\
+		if (arm64_extio_ops->pfout)				\
+			arm64_extio_ops->pfout(arm64_extio_ops->devpara,\
+				addr, value, sizeof(type));		\
+}									\
+									\
+void ins##bw(unsigned long addr, void *buffer, unsigned int count)	\
+{									\
+	if (!arm64_extio_ops || arm64_extio_ops->start > addr ||	\
+			arm64_extio_ops->end < addr)			\
+		reads##bw(PCI_IOBASE + addr, buffer, count);		\
+	else								\
+		if (arm64_extio_ops->pfins)				\
+			arm64_extio_ops->pfins(arm64_extio_ops->devpara,\
+				addr, buffer, sizeof(type), count);	\
+}									\
+									\
+void outs##bw(unsigned long addr, const void *buffer, unsigned int count)	\
+{									\
+	if (!arm64_extio_ops || arm64_extio_ops->start > addr ||	\
+			arm64_extio_ops->end < addr)			\
+		writes##bw(PCI_IOBASE + addr, buffer, count);		\
+	else								\
+		if (arm64_extio_ops->pfouts)				\
+			arm64_extio_ops->pfouts(arm64_extio_ops->devpara,\
+				addr, buffer, sizeof(type), count);	\
+}
+
+static inline void arm64_set_extops(struct extio_ops *ops)
+{
+	if (ops)
+		WRITE_ONCE(arm64_extio_ops, ops);

Why does this need to be WRITE_ONCE? You don't have READ_ONCE on the reader
side. Also, what if multiple drivers want to set different ops for distinct
address ranges?

I think that the idea here is that we only have possibly one master in the system which offers indirectIO backend, so another one could not possibly re-set this value.


+}
+
+#endif /* __LINUX_EXTIO_H*/
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 0bba427..136735d 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -31,6 +31,7 @@
 #include <asm/early_ioremap.h>
 #include <asm/alternative.h>
 #include <asm/cpufeature.h>
+#include <asm/extio.h>

 #include <xen/xen.h>

@@ -149,6 +150,34 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
 #define IO_SPACE_LIMIT		(PCI_IO_SIZE - 1)
 #define PCI_IOBASE		((void __iomem *)PCI_IO_START)

+
+/*
+ * redefine the in(s)b/out(s)b for indirect-IO.
+ */
+#ifdef CONFIG_ARM64_INDIRECT_PIO
+#define inb inb
+#define outb outb
+#define insb insb
+#define outsb outsb
+/* external declaration */
+DECLARE_EXTIO(b, u8)
+
+#define inw inw
+#define outw outw
+#define insw insw
+#define outsw outsw
+
+DECLARE_EXTIO(w, u16)
+
+#define inl inl
+#define outl outl
+#define insl insl
+#define outsl outsl
+
+DECLARE_EXTIO(l, u32)
+#endif
+
+
 /*
  * String version of I/O memory access operations.
  */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7d66bba..60e0482 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -31,6 +31,7 @@ arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 					   sys_compat.o entry32.o
 arm64-obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o entry-ftrace.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
+arm64-obj-$(CONFIG_ARM64_INDIRECT_PIO)	+= extio.o
 arm64-obj-$(CONFIG_ARM64_MODULE_PLTS)	+= module-plts.o
 arm64-obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
diff --git a/arch/arm64/kernel/extio.c b/arch/arm64/kernel/extio.c
new file mode 100644
index 0000000..647b3fa
--- /dev/null
+++ b/arch/arm64/kernel/extio.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2016 Hisilicon Limited, All Rights Reserved.
+ * Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+
+struct extio_ops *arm64_extio_ops;
+
+
+BUILD_EXTIO(b, u8)
+
+BUILD_EXTIO(w, u16)
+
+BUILD_EXTIO(l, u32)

Is there no way to make this slightly more generic, so that it can be
re-used elsewhere? For example, if struct extio_ops was common, then
you could have the singleton (which maybe should be an interval tree?),
type definition, setter function and the BUILD_EXTIO invocations
somewhere generic, rather than squirelled away in the arch backend.

Will

The concern would be that some architecture which uses generic higher-level ISA accessor ops, but have IO space, could be affected.

John


.



--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux